EZ 4047 Double Flood Eaz Dri Truckmounted Water Extraction Unit
EZ 4047 Double Flood Eaz Dri Truckmounted Water Extraction Unit can be used for deflooding and vacuum recovery from pressure washing. This unit will gulp an impressive 530 CFM and up to 16" of mercury of vacuum. Desinged for single or dual wand use. This Super Extraction System is the easiest of all flood pumping truckmounts to service and maintain.
106 gallon stainless steel waste tank with dual 2" vacuum ports
Dual 10 GPM Auto dump dumps.
All Stainless Steel Frame
#10 Love Joy Connection
40 HP Kohler Engine
Tuthill 4007 Cometitor Plus Rotary Vacuum Blower.
COMPETITOR PLUS rotary blowers are designed to be
interchangeable with equivalent sizes of Roots Universal RAI®47
,
and many Sutorbilt®
California Series B and F, and Legend™
Series 4L and P blowers. COMPETITOR PLUS models are rated
up to 15 PSIG discharge pressure or 16” Hg dry vacuum.
In addition to interchangeability, Tuthill Vacuum & Blower
Systems has improved on existing designs with the following
superior features ordinarily found only on premium blowers:
Helical Gearing
COMPETITOR PLUS blowers are timed with hardened, precision
helical gears, keyed to the rotor shafts, not taper fit spur gears
as offered by other manufacturers, which have greater backlash,
and can slip and lose timing. Helical gears are also quieter,
reducing mechanical noise.
Stronger Bearings
All COMPETITOR PLUS blowers include double row ball
bearings at the gear end, stronger than single row ball bearings
offered by other manufacturers. Drive shaft bearing is cylindrical
roller type for additional strength against side loading from Vbelt drives. As a result of this superior design, COMPETITOR
PLUS blowers offer design bearing life as much as 50% greater
than models offered by other manufacturers.
Rotors with Integral Shafts
COMPETITOR PLUS blowers include precision machined
ductile iron rotors with large, integrally cast shafts, not press
fit and/or pinned shafts offered by other manufacturers, which
can loosen over time and cause rotor clash. All rotors are
dynamically balanced for vibration-free rotation.
Positive End Clearances
End clearances are positively established at the blower gear end,
eliminating the risk of shifting end clearances when installing or
removing drive components. This also eliminates the need for
those special fork and saddle tools required by other brands to
reset end clearances.
Polished Sealing Surfaces
All shaft surfaces in contact with sealing members are polished
to reduce seal wear and risk of leakage.
Individually Tested
Every COMPETITOR PLUS blower is factory tested to assure
you of the highest quality. While some manufacturers perform
only sample testing, We go the distance to insure that your
blower meets our rigid ISO 9001 registered quality standards.
F426 Purpose-built power for flood extraction
Big Gulp 4500 provides high velocity and quick-recovery water removal in homes, businesses, production facilities, accident sites, commercial locations – anywhere thorough, efficient water removal is needed.
- The 4-cycle 40 HP gasoline-powered Kohler operates at 3200 RPM, delivering top performance and low maintenance.
- Delivering 500 CFM, the Tuthill 4007 has a proven track record of providing optimum vacuum performance day in and day out.
- Marine-grade stainless steel construction with automatic shut off at 106 gallons. A big capacity 2-inch waste dump port means quick dumping and easy cleanout.
- Provides 20 GPM (at 60 ft. of head) waste disposal option, significantly greater than competitive waste pumpouts.
- Two 2 inch vacuum inlet ports allow two techs to extract with one machine. A 3-inch exhaust port virtually eliminates back pressure on vacuum system to maximize performance
- Vacuum gauge and hour meter for monitoring job progress and maintenance.
- Double 2-inch vacuum ports for dual wand operation
- Simple, "turn the Key", easy operation
- Higher vacuum power for faster extraction
- Components with proven reliability
- Lower maintenance than typical truckmounts
- Easier Serviceability than all other truckmounts
| Model |
|
Big Gulp 4500 (F426) |
| Powerplant |
|
Briggs & Stratton 35 HP gasoline engine operating at 3000 RPM |
| Blower |
|
Gardner Denver 410 trilobe
16" Hg and 600 CFM |
| Vacuum ports |
|
Dual 2½ in. |
| Waste tank |
|
120 gal. stainless steel
32 in. diameter × 49 in. high with legs |
| Waste pump |
|
Jabsco self-priming, electromagnetic clutch drive
45 GPM @ 60 ft. of head
40 GPM @ 80 ft. of head |
| Console dimensions (W × H × D) |
|
20 × 38 × 48 in.
51 × 97 × 122 cm |
| Warranty |
|
2 year parts, 2 year labor |
STANDARD EQUIPMENT
• 100 ft. 2" vacuum hose
| 
English
French
Spanish
German
Italian
Portuguese
