HydroTech Hard Surface Tools HydroTech's High Performance,
High Ph Chemicals Are Specially Designed for High PSI Extractors & Specifically for Use
With the HydroTech "Clean & Capture" Hard Surface Cleaning System & Equipment.
HydroTech Portable HT-1500A
The "Clean & Capture"(tm) HT-1500 is the only ADJUSTABLE 200 - 1500 psi
portable hard surface extractor on the market! Designed exclusively for
hard surface cleaning & restoration, the "Clean & Capture" HT-1500 pressure
washes and extracts SIMULTANEOUSLY and WITHOUT over-spray, saving up to 60%
in time and labor. This exceptional portable delivers 25% MORE pressure than
the Mytee "Expedition" or HydroForce's "FX-88HP", and is driven with 50% MORE
horsepower!
Model: HT-1500A | PSI: 200-1500 | Vacuum: Dual 2-Stage NO
Compact Power Unit, with 1.5 hp / 120 Volt, 3 gpm pump
Hydrotech's ProRaceR leaves the competition in the dirt! This new,
patented technology quickly and effectively cleans and strips large
areas of tile, grout, linoleum, safety matting, marble, stone, pool
decking, VCT, and irregular surfaces as fast as you can glide over
your surface.
Using our ErgoFlex fatigue-absorb design, you can work longer, better,
and more comfortably! Reduce operator fatigue, obtain maximum results,
and noticeably increase your profits with only one tool - the ProRaceR!
Use Hydrotech's 24-hr. factory direct technical assistance hot line for
all of your hard surface cleaning needs and questions. Our experts are
personally available to you even at 3:00 AM.
The patented ProRaceR design is radically different from any other hard
surface cleaning tool on the market. ProRaceR uses a powerful 1/8 HP
electric motor (approx. 1,100 rpm) to inject all available jet pressure
directly toward the dirt. Other tools generate rpm by setting jets to thrust
away from the surface, "pushing-off" to rotate the armature. These tools must
have jets set to a specific angle to get the armature spinning, and for this
reason cannot focus on the real issue - cleaning! ProRaceR jets can be adjusted
to any desired cleaning angle, and the rpm is virtually unaffected. When jet
angles on other tools are changed for better cleaning, the rpm is reduced or
possibly stopped. Hydrotech's ProRaceR uses all pressure for cleaning.
Cleans an amazing 26 inches of surface per second, 120 ft. per minute.
Works with 0-4000 PSI.
All pressure used for cleaning, not armature rotation
Use's Hydrotech's "Clean and Capture" system for superior performance -
19 inch cleaning path glides over surfaces
Use with your existing truck mount, or with a high performance extractor
Armature powered by electric motor, not water pressure
1100 RPMs drives water directly into dirt - not away from it
Accessory wheel package for rough exterior surfaces
HydroTech's High Performance,
High Ph Chemicals Are Specially Designed for High PSI Extractors & Specifically for Use
With the HydroTech "Clean & Capture" Hard Surface Cleaning System & Equipment.
Auto Detailing
Bathroom Supplies / Soaps
Chemicals
Waste Recepticals
