Restoration and Construction Dehumidifiers Phoenix 200 MAX Dehumidifier High Capacity, Low Grain Refrigerant Dehumidifier The Phoenix 200 MAX is one of the most effective and versatile drying devices available on the market today. The 200 MAX removes more water and has more grain depression than other refrigerant dehumidifiers, even though it only requires 7.4 amps of electricity. When you combine this performance with the multiple ducting and air filtration options, it is easy to understand why the Phoenix 200 MAX is considered the ultimate in low grain refrigerant dehumidification. High-Efficiency Design The term LGR (Low Grain Refrigerant) was created to describe the unique drying capabilities of the Phoenix 200 dehumidifier. Beginning with the original Phoenix 200 LGR, these units were known for delivering substantially drier air, as well as for drying areas to much lower specific humidity levels than conventional dehumidifiers. The Phoenix 200 MAX, an improved version of the original Phoenix 200, is the culmination of eight years of LGR manufacturing and design expertise. As always, Phoenix dehumidifiers feature significant air filtration. This filtration dramatically improves the air quality in the areas being dried and assures the continued optimal performance of the refrigeration system. The Phoenix 200 MAX offers multiple filter options. While MERV-6 and MERV-8 still can be used, Phoenix has raised the bar and now includes standard in all 200 MAX a 65% MERV-11. The optional 95% MERV-14 will remove particles as small as .3 microns. Versatile and Durable The multiple ducting options on the Phoenix 200 MAX allow for ducting both the intake air and the filtered and dehumidified supply air. This makes it possible to easily combine the Phoenix 200 MAX with a HEPA air scrubber, air conditioner or desiccant dehumidifier. Features Improved water removal +16 gals/day (133 pints) AHAM (80ºF, 60%) 30 gals/day maximum Improved grain depression The driest air from an LGR Multiple air filter options Standard 65% MERV-11, 57% MERV-8, or 95% MERV-14 Multiple ducting options 12" intake, 10" layflat supply Less than 7.5 amps Removes the most pints of water per kilowatt Stainless steel cabinet Internal pump with 30 feet of hose Five-year warranty on the sealed refrigeration system   Phoenix 200 MAX Specifications Part No.: 4024920 Power: 7.4 amps; 851 watts Water Removal: 133 pints/day @ AHAM (80°F, 60%) 240 pints/day @ saturation 30 gal/day maximum @ saturation Blower: 265 CFM Internal Condensate Pump with 20 lift, 30' vinyl hose Operating Range:      33°F to 105°F Filters: 16" x 20" Standard 2" Pleated Media 30%* MERV-6 Optional 2" Pleated Media 30%* MERV-8 Optional 2" Pleated Media 65%* MERV-11 Optional 4" Mini-Pleat Media 95%* MERV-14 Duct Options: Intake – 2" Flex-Duct Supply – 10" Lay-Flat Warranty: Five years First year 100% of Parts and Labor Second-fifth year 100% of Parts of sealed refrigeration system Dimensions     Cabinet      w/ Cart       Shipping Width: 20" 24-1/4" 27-1/2" Height: 40" 40" 45-1/2" Depth: 18-1/4" 21-3/8" 22" Weight:        131 lbs 160 lbs 200 Max Pricing   Phoenix 300 Dehumidifier High-Capacity LGR Dehumidifier Our years of experience in refrigeration technology are reflected in the design of the Phoenix 300. Thanks to the manageable size and weight, the unit offers portability combined with performance. The Proven Performance of a Phoenix The Phoenix 300 Dehumidifier is designed to maximize the water removal capacity from a single 110-V, 15-amp circuit. The multiple ducting options on the Phoenix 300 allows for ducting both the intake air and the filtered and dehumidified supply air. This makes it possible to easily combine the Phoenix 300 with a HEPA air scrubber, air conditioner or desiccant dehumidifier. Like all Phoenix units, the MAX 300 features a stainless steel cabinet, internal pump with 30 feet of hose, and a five-year warranty. Phoenix dehumidifiers feature significant air filtration. Even the standard 57% MERV-8 filters remove over 90% of seven-micron particles (the size of a human red blood cell). This filtration dramatically improves the air quality in the areas being dried and assures continued optimal performance of the refrigeration system. The chart above shows the Phoenix 300 water removal rate at different temperatures and relative humidities. Phoenix dehumidifiers, with their superior design, achieve more water removal per kilowatt hour of electricity than any other dehumidifier on the market.   Features High capacity - Up to 38 gallons per day High energy efficiency - Plugs into a grounded 115-V outlet Pleated media filter - Built-in air filter reduces dust and mold Twist-on duct collar - Direct the drying power where you need it Optional high-efficiency filter - Removes 95% of one-micron particles Reservoir pump system - Strong and dependable, 20 ft of lift Pump purge switch - Drains reservoir, no spills or drips Pump fail warning light and cut-off - Prevents reservoir overflow Lighted power switch - Check machine status at a glance Digital hour meter - Easy-to-read for more accurate billing 30-ft power cord - No need for extension cords 30-ft drain hose - Pump condensate to sinks or drains   Phoenix 300 Specifications Part No.: 4022599 Power: 12 amps, 115 Vac, Grounded Water Removal: 176 pints/day @ AHAM 80°F, 60% RH 304 pints/day maximum @ 90°F, 90% RH Blower: 540 CFM Drain Hose:      30' Vinyl Condensate Pump: Internal, w/20' Lift Operating Temp. Range:      33°F to 110°F Warranty: Five Years First Year 100% of Parts and Labor; Second-fifth year 100% of Parts of Sealed Refrigeration System   Dimensions     Cabinet      Overall       Shipping Width: 24" 29" 30" Height: 45" 46" 54" Depth: 20" 25" 28" Weight:        175 lbs 210 lbs Phoenix 300 pricing

Phoenix R175 Dehumidifier
Compact Design, Big Performance The Phoenix R175 combines our Proven Performance™ into a compact, state of the art, roto-mold design. The R175 reflects all the ingenuity and engineering expertise that is expected in equipment that bears the Phoenix name. Efficient design results in the R175 removing 30% more water (92 pints at AHAM) than competitive LGR units of similar size, while drawing only 6.1 amps of power. The Phoenix reputation for performance is continued in the R175's excellent grain depression and operating range. The new solid state control panel features a lighted hour meter, pump purge control and a defrost light. The hour meter can be activated for ten seconds when the unit is unplugged to log the status of the unit in the warehouse or on the truck. The sturdy telescoping handle provides sure control and retracts for storage. The recessed 12-inch wheels, compact design and balanced weight distribution make the R175 the most maneuverable dehumidifier in the restoration industry. The rugged roto-mold housing resists dents and dings and the granite pigments hide scuffs and scratches. The body also features chamfered corners to prevent damage to walls and woodwork while maneuvering on the job-site. Phoenix attention to detail and fore-thought are evident in the R175's ability to "nest" one upon another, or securely be "layered" with plywood. An area to accept a company label or identification is located below the R175 emblem. Notched surfaces for tie-down straps and multiple lift points were also included. Like every Phoenix, the R175 features effective air filtration with a pleated media MERV-7 filter standard (optional MERV-11 is available). Multiple ducting options are available with 12-inch intake duct tabs on the lid and a wire duct collar for 10-inch lay-flat duct. The outlet grill is configured to accept a variety of thermo-hygrometer probes (e.g. Vaisala, Humiport, etc.) for taking accurate psychrometric readings. The 20-foot power cord and 33-foot condensate hose store conveniently inside the hinged stainless steel lid. The R175 marks Phoenix Restoration Equipment's entry into the manufacturing of roto-mold LGR dehumidifiers proving our commitment to technology, performance and durability. Features   Roto-mold design 92 pints/day at AHAM 6.1 amps of power 12-inch recessed wheels Telescoping handle Solid state control panel Multiple ducting options   Phoenix R175 Specifications Part No.: 4026300 Power: 6.1 amps, 110-120 VAC, Grounded Water Removal: 92 pints/day @ AHAM (80°F, 60%) 21 gal/day maximum @ saturation Blower: 230 CFM Operating Range:      33°F to 105°F Filters: 12" x 12" x 1" Pleated Media MERV-7 Duct Options: Intake - 12" Flex-Duct Supply - 10" Lay-Flat Warranty: Five years 1st year 100% of Parts and Labor 2nd-5th year 100% of Parts of sealed refrigeration system.   Dimensions     Machine      Shipping Width: 20" 24" Height: 33.5" 45.25" Depth: 20" 25.5" Weight:      105 lbs 110 lbs	Phoenix R175 Pricing

Phoenix 200 HT Dehumidifier
The Phoenix 200 HT is the ultimate in low grain refrigerant dehumidification and high temperature performance. The 200 HT is the first LGR dehumidifier designed to maintain maximum water removal capacity through ambient conditions up to 120°F. The Phoenix 200 HT, featuring its patent-pending technology, not only allows superior performance and greater CFMs in high ambient temperatures, but also exceeds the performance and efficiency of the original Phoenix 200 MAX under all conditions. Faster Drying Means Happier Customers The Phoenix 200 HT's ability to perform in temperatures above 90°F offers two major advantages over other standard LGR's. First, drying at higher temperatures speeds the evaporation of moisture in the structure when compared to cooler temperatures. Second, the Phoenix 200 HT reduces the need to remove drying equipment to control temperature inside the affected area. The downward-focused exhaust airflow directs dehumidified low-grain air toward the floor, while a raised base improves drying directly under the dehumidifier. The Phoenix 200 HT also features a recessed condensate outlet, inboard wheels, increased airflow with higher static pressure and an improved skid plate design. As always, Phoenix dehumidifiers feature significant air filtration. The standard 65% MERV-11 filter removes over 90% of seven-micron particles (the size of a human red blood cell). This filtration improves the air quality in the areas being dried and assures the continued optimal performance of the refrigeration system. The multiple ducting options on the Phoenix 200 HT allow for ducting both the intake air and the filtered, dehumidified exhaust air. High Temperature Performance The Phoenix 200 HT is designed to maintain water removal capacity up through 120°F. In order to accomplish this, Phoenix engineers created a highly effective method of bypassing ambient air over the condenser when ambient temperatures are above 80°F. Above 80°F - When used in high temperature conditions (above 80°F), the refrigerant pressure inside the condenser rises. By removing the grain control magnet from the by-pass openings, additional airflow is directed over the condenser and less airflow is directed across the evaporator. This airflow lowers the refrigerant pressure in the condenser while also slowing down the air across the evaporator, which allows the air to reach its dew point. Between 50°F and 80°F - When used in normal dehumidifier operating temperatures (50°F to 80°F), the grain control magnet should cover the bypass openings. This allows increased airflow across the evaporator and increases performance by increasing the amount of air that is dehumidified. Below 50°F - When the Phoenix 200 HT is used in very cool operating temperatures (below 50°F), frost will form on the evaporator coil as it dehumidifies. When enough frost forms, the defrost thermostat will initiate the timed defrost cycle. The cycle periodically turns off the compressor while allowing the blower to run. The grain control magnet should cover the bypass openings in this operating range because the increased airflow and static pressure will help defrost the evaporator more quickly and efficiently. Phoenix 200 HT Specifications Part No.: 4025900 Power: 7.5 amps, 110-120 VAC, Grounded Water Removal: 140 pints/day @ AHAM (80°F, 60%) Removal 260 pints/day @ saturation 32 gal/day maximum @ saturation Blower: 335 CFM Operating Range:      33°F to 125°F Filters: 16" x 20" x 2" Pleated Media MERV-11 Duct Options: Intake - 12" Flex-Duct Supply - 10" Lay-Flat Warranty: Five years 1st year 100% of Parts and Labor 2nd–5th year 100% of Parts of sealed refrigeration system. Dimensions     Machine      Shipping Width: 20.25" 24" Height: 40" 45.25" Depth: 21.375" 25.5" Weight:      138 lbs 164 lbs	200 HT Pricing

Phoenix D385 Dessicant Dehumidifier
The Phoenix D385 provides the perfect combination of features and performance the restoration industry has been craving in a desiccant dehumidifier. Ingeniously designed to operate vertically or horizontally, the Phoenix D385 provides the wide operating range and ultra-low grains of a desiccant with the water removal capacity of the largest LGRs in cabinet dimensions identical to our popular Phoenix 200 Max. The Phoenix D385 is not like the "toy" portable desiccant dehumidifiers that lack real capacity. The D385 delivers 385 CFM of ultra-low grain process air. The true four hole configuration allows the Phoenix D385 to be located in the affected area with the 75 CFM re-activation air stream isolated from the drying chamber. Three hole design units inherently pull unaffected and/or outside air into the drying chamber. The D385's four hole design allows the restoration contractor to set-up for effective positive, neutral or negative pressure operation. Designed to operate vertically or horizontally, the D385 will fit inside most crawlspaces. Having the D385 securely inside, rather than outside the crawlspace access, avoids the possibility of someone tampering with the unit. The 385 CFM of process air will provide 3 ACH on a 1750 square foot crawlspace with a 4-foot height or over 850 square feet of affected areas with 8-foot ceilings. The Phoenix D385 is easy to transport and set-up. The D385 will fit on your truck in the areas already designed for your LGRs and will move on to the jobsite with the same portability. All the power to the unit is provided by two 115 volt grounded power cords. Simply plug the cords into separate 15 amp circuits. Each cord draws only 11 amps to power the D385. The re-activation air stream is ducted through 6" flex duct provided with the unit and stores conveniently in the top of the unit. The Phoenix D385 makes it possible for every restoration contractor to add the ultra-low grain performance of a desiccant with real water removal capacity to their equipment fleet. The low price and high performance of the D385 makes it possible to purchase three Phoenix desiccants with a higher combined capacity, for a smaller investment than a single 1000 CFM competitive desiccant. Phoenix D385 Specifications Part No.: 4026700 Power: 2 circuits: 11 Amps, 115 VAC each 22 Amps total power consumption Water Removal: 116 pints per day AHAM Blower: 385 CFM process airflow 75 CFM reactivation airflow Operating Range:      Up to 140°F Range as low as 10°F Filters: Process filter size: 16" x 20" x 2" Reactivation filter size: 12" x 12" x 1" Duct Connections: Process inlet: 12" flex-duct (optional) Connections process outlet: 10" lay flat collar (optional) Reactivation inlet: 6" flex-duct (optional) Reactivation outlet: 6" flex-duct (required) Warranty: One year parts and labor Dimensions     Machine      Shipping Width: 24-1/4" 27-1/2" Height: 40" 45-1/2" Depth: 21-3/8" 22" Weight:      105 lbs 130 lbs	D385 Pricing

Phoenix Solution Dehumidifier Amplifier
A New Era in LGR Technology The new Phoenix Solution LGR performance amplifier widens the effective operating range of LGR dehumidifiers, increases grain depression, and improves water removal rates up to 100 percent. The Solution is a specially designed intercooler that pre-cools the incoming air stream to the LGR dehumidifier. This pre-cooling is the same process that provides LGR dehumidifiers with their leap in performance over conventional dehumidifiers. The Solution is designed to take advantage of outside, unaffected or air conditioned air to provide significant water removal in drying conditions up to 140°F. Therma-Stor testing has revealed an increase in water removal rates and faster drying times using the Solution by utilizing cold outside air. The Phoenix Solution marks a new era in LGR dehumidifier performance. Since the pre-cooling function of the Solution actually removes BTUs from the drying area, it reduces the dependence on air conditioning and the need to sacrifice drying equipment to maintain your optimal drying conditions. The Solution enables significant dehumidification while taking advantage of ultra fast, high temperature drying rates. This high temperature dehumidification performance is an upgrade to heat-only drying equipment which is otherwise limited by high dewpoint conditions. When outside grain levels are high, the Solution allows dehumidification to enhance the drying process. The Solution improves the grain depression of the dehumidified air. This increases the vapor pressure differential (the key to evaporation) up to 33% and accelerates the drying process. This improves drying times in all classes of water damage but is particularly beneficial in specialty drying applications, such as hardwood floors. The Solution is designed to nest into the top of the Phoenix HT and 200 Max and is constructed of the same quality materials. The increased operating efficiency of the dehumidifier provided by the Solution is often equal to the 1.6 amp power requirement of the unit. The Solution is easy to carry and stacks for transportation and storage. The Phoenix Solution is easy to set-up. Simply remove the top and filter from the Phoenix 200 Max or HT, install the dehumidifier bracket, set the Solution into the top opening of the dehumidifier and slide forward into the capture guides on the dehumidifier bracket. Then, duct the inlet air of the Solution to either an outside, unaffected or air conditioned source, and duct the outlet of the Solution back to the same source. Phoenix Solution Specifications Part No.:      4026600 Power: 1.6 amps, 110-120 VAC, Grounded Blower: 230 CFM (Secondary Air Stream) Ducting:      Primary Air Stream Inlet: 12" Flex-Duct; Outlet: NA Secondary Air Stream Inlet: 8" Flex-Duct; Outlet: 10" Lay-Flat Problems Solved by the Phoenix Solution:   Widens the temperature range for LGR performance up to 140°F Increases water removal rates up to 100% Increases grain depression up to 33% for faster drying of more materials Removes BTUs from the affected areas Achieves optimal drying conditions in structures with insufficient or without air conditioning Drives the grains/lb. in the drying area from the mid 30's to the low 20's Enhances the performance of heat based systems when outside grains/lb. or indoor temperatures are high by allowing dehumidification	Phoenix Solution Pricing