Upgrade info/links please

[Clearly Prfessional]

I want to upgrade my mytee (again) to 2, 3 stages. auto fill/dump.

It is an older 1001 100 psi no heat, 2 2 stage machine that i have 2" intake on.

Inside are two float tubes.

I want to do this for hi rise units and the units too far for decent hose reach from my TM.
I will also want to do tile so I need a 1000-1200 psi pump.

I could start over with a new machine but why? I have this faithful unit here.

Please link the auto auto for me. There was once a pumptek 1200 psi pump here somewhere.

[Donald]

To add more vacuum and auto dump, just purchase the Mytee 7001 machine
http://www.steam-brite.com/store/mytee-flood-pumper-vacuum-booster-13vacs-70gpm-auto-dump-p-6255.html
This hooks to your existing vacuum and would give you 7 stages total all the same time adding auto dump too.
This is a quality auto dump pump, unlike the little baby auto dump Mytee installs inside of the M-12 and M-5 extractors.
You can add auto fill to any extractor with
http://www.steam-brite.com/store/auto-fill-with-chemical-injector-p-3993.html
You can add 1200 psi to your system with the Mytee water hog
http://www.steam-brite.com/store/advanced_search_result.php?keywords=water+hog
You can even clean with more aggression than the Water Hog for less money with our 2000 psi system
http://www.steam-brite.com/store/brite-star-electric-pressure-washer-p-4902.html
(it is cheaper too)
If you decide to go with the pressure washer, I would have to get you a special adapter that converts the 22 mm pressure washer thread to carpet and tile cleaning QD with a pressure gauge on it.