5230SGF-30G3-(LP/NG) for only $5,950.36 - Steambrite's price on the Cabinet Style (Hot & Cold) Pressure Washers - 5230SGF-30G3-(LP/NG) extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

STANDARD FEATURES

• Rugged powder coated steel frame, enclosed pump/motor compartment w/ hinged lid
• Super efficient schedule 80 coil

  Factory Installed  Pressure Pro PCA750-4 Replacement Burner Coil for 4-5 Gpm Pressure Washers

• Stainless steel coil wrapper,

  Factory Installed  Pressure Pro Stainless Coil Wrap PCA750-7 Fits Hot Shot Vertical 3.5-4.5 GPM Models

• Control panel,
• Float tank

  Factory Installed  Pressure Pro Float Tank Assembly YFLOATTANK 1.05 gallons

• Robert Shaw LP/NG electronic ignition 24 volt controls

  Factory Installed  Robertshaw Natural Gas and Propane Valve

• Commercial/Industrial grade motor

  Factory Installed Baldor Motor EM3711T 10 Hp 3 Phase 3450 RPM 215T Frame 208-230/460 Volts 11.8 Amps or similar

• Low speed V-belt driven General Pump

  Factory Installed  General Pump HP5535 3500 psi 5.5 gpm 1450 rpm  or similar

• High limit over temp protection

  Factory Installed 225 Degree Switch Sensor 1/2" Mip with 3 Wire Leads  Controls water temperature.

• Vacuum switch

  Factory Installed  Mecline Vacuum Switch MVVS2.5  Used to control solenoids, Relays, and Low and No water safety switches.

• Safety pressure relief valve

  Factory Installed  Pressure Pro 22533A-4600 5000psi 3/8Mip 6 gpm 140 degree Pressure Relief Valve  Protects coil from over pressurization.

• 10′ power cord (no plug)

NOTE: All units are completely factory assembled, tested in the USA, and delivered ready to operate.
 

STANDARD ACCESSORIES

• Gun/wand assembly with insulated grip and quick connects

  Factory Provided  Pressure Pro AGUD3621290C Washer Lance and Gun Combo 4060 psi Insulated Grip 36 in w Couplers

• 50′ high pressure hose w/quick connects

  Factory Provided Pressure Pro AHS330 Double Wire 50 ft Washer Hose 3/8 In 6000psi With Couplers Installed Black

• Maxi-Flo 20% chemical injector assembly w/quick connects

  Factory Provided  Pressure Pro ACI005 General Pump 100775 Maxi-Flow Fixed 20% Chemical Injector 3-5 gpm

• 4 color-coded QC spray nozzles

  Factory Provided  Pressure Washing Nozzles, and Repair Parts

• 1 color-coded QC chemical soap injection nozzle

General pump Maintenance Guide

Owners Manual

Factory Warranty

Factory Brochure

Cleaning Units/Speed: 30,000

AVAILABLE OPTIONS

• 98-010 Panel Mount Thermostat $100

  General Pump 100538 Dial Thermostat 86 - 250 Degrees F. 781999 Parts plus labor to be added

• 98-011 Hour Meter 

  Factory Installed  Digital Hour Meter 120 Volts, El 24-277 Ac/Dc 50/60 Hz - 8.749-316.0  Perfect for oil change and descale intervals and other maintenance.

• 98-101 10˝ Draft Diverter $185.83
• 98-102 Soap Solenoid w/ Panel Mount Switch $106.56
• 98-104 Time-delay Shutdown w/ Adjustable Timer  $308.00
• 98-105 Single Remote Station w/ Start/Stop/Burner $201.86
• 98-106 Multi Remote Stations w/ Start/Stop/Burner/Soap $344.82
• 98-107 Add’l Remote Stations $265.12
• 98-108 Oil Fired Option $238.69

  Optional Factory installed Beckett 240 Volt AFG Oil Burner 8.709-326.0 Pressure Pro301 VMG202

• 98-130 By-Pass Thermal Shutdown $89.66
• 98-510 18/5 Cable, Single Remote Station $1.16 per ft
• 98-512 18/7 Cable, Multi Remote Stations  $1.39 per ft
• General Pump Oil

  General Pump Oil Case 24 units  Required at 50 hours and then every 200 hours

• Descaler

  Shazaam: Descaler System Maintainer - 1 Gallon  Required every 100 hours of use.  One gallon is used for each descale job. Prevent coil mineral clogging and allows equipment to consume less BTU's of fuel to heat the water.

All Stainless Steel Frame Models Available – Consult sales rep.  Raw Stainless prices subject to change without notice.