The Turbojet 2012V is a compact workhorse for residential and light commercial duct cleaning. It’s hard to believe an 18” wide cabinet that weighs just over 100 lbs. can provide 2700 CFM at 5” static pressure, a full-size 12” Inlet, 3-stage HEPA filtration, soft start and will run at 13 or 17 amps and has a 3 year warranty. This is performance that is found in units twice its size and weight.

The 2012V’s legendary performance and size has been proven aboard ships, offshore drilling rigs, as well as mobile homes and 6,000 room hotels, and yet it is perfect for one-person operation out of a van, trailer or box truck.

Model 2012V uses the same ESP speed control found in the Turbojets 3200B & 4200. The power inverter converts 115-volt single-phase household power to 3-phase 220-volt power. This eliminates the start-up power surge required by a single speed motor so the power of the 2012V is virtually the same as the 3200B except in a smaller, more compact size. 

The 2012V has an optional Exhaust Flange Kit to exhaust air through a 12” twist lock hose outside the work area. This means it can be used as an air scrubber and place the building or room under negative pressure during remediation, or the HEPA can be removed to increase CFM or prevent it from becoming contaminated with smoke odors from a fire damage remediation job.

FEATURES
• Truly portable at 140 lbs. and only 19.5"w x 29"d x 55"h.
• One-person operation, in and out of service vehicle and up and down stairs.
• 2012V - 2 speed soft start 1.5 HP motor w/ 3 phase inverter and direct drive backward incline blower assembly.
• Filtration includes 1st stage 18 x 24 x 6 washable "slide-in" filter, 2nd stage 18x24x1 permanent electrostatic filter and 3rd stage 18x24x6 certified HEPA filter, providing efficient filtration with maximum air flow even when dirty. Optional disposable 1st stage bag filter available
• 12 Inch diameter inlet pulls 5 inches of w.c. static pressure, and 2700 CFM air flow (independently tested by an AMCA certified lab with all filters installed).
• 12" rear, ball bearing wheels, 3 swivel non-marking casters up front.
• Steel reinforced aluminum construction and powder-coated for a professional looking, non-marking finish.
• Completely field tested by Air-Care, in our service operation.
• Purchase includes 3-year limited warranty.

Easy one person loading into your service vehicle