TURBOJET MODEL 4200
|
|
Air Care constantly strives to improve the performance, convenience and efficiency of all its products and test them in the field for reliability and maneuverability. The Model 4200 Dual Motor Turbojet is the latest, most powerful portable negative air machine Air-Care has ever produced, yet it will even run on 15 AMP, fused circuits.
Both motors are 1.5 Horsepower, 3 phase, high efficiency units with individual variable speed inverters featuring Electronic Speed Processing (ESP) and ramp up starting to eliminate the power surge that most portable duct vacuums generate. Each motor can be independently set to run on either a 15 amp or a 20 amp circuit. Two independent circuits are required to run both motors. If only one circuit is available, one motor can be used to produce virtually the same pull as a single motor Turbojet.
The 4200/4200S are the smallest dual motor negative air machines on the market today. The 4200 & 4200S will handle large commercial air duct systems, but are small enough for residential use as well. They feature non-marking wheels, built in stair-climber, upper handle rollers for horizontal use and to assist in loading into your service vehicle, with 16" & 12" inlets (included). The 3 stage filtration features a 200 micron reusable 1st stage bag filter, 2nd stage electrostatic air filter and a 3rd stage 23.5x23.5x8 high density pleated Certified HEPA filter.
|
Item #CE4200 & #CE4200S
|
|
Specifications
|
Turbojet 4200 |
|
| Size |
25.3" W x 29" D x 53" H |
|
| Weight |
240 lbs. |
|
| Power Required |
220 V 60 Hz @ 13-17 amps x 2 |
|
| Power Connections |
TWO 3-wire inlets w/two 20 amp breakers |
|
| Power Cord |
Two 12 gauge x 50 Ft. power cords |
|
| Air Flow |
5000 CFM free air/ 3500 CFM filtered |
|
| Static Pressure |
5.0" |
|
| Attachment |
16" &12" twist lock couplers |
|
| Exhaust Hose |
Optional 12" twist lock couplers (2) |
|
| Filtration |
3 Stage + 4th stage pre filter |
|
| Pre-Filter |
Pellon vapor barrier |
|
| First Stage |
24" x 24" x 8" washable "slide-in" filter |
|
| Second Stage |
23.5x23.5x1 Electrostatic, permanent |
|
| Third Stage |
23.37 x 23.37 x 8 certified HEPA |
|
| Operating Range |
25-125 deg. F (-4 to 50 deg. C) |
|
| Construction |
Aluminum reinforced with steel |
|
| Control Panel |
Single plug-able panel w/pressure gauge, 2-Ammeters, 2-speed controls & 2-start/stop rocker switches |
|
| Blower |
TWO-Backward Inclined |
|
| Motor & Inverter |
TWO -1.5 HP 3 phase motors & 2 single phase to 3 phase inverters w/soft start & dual speeds |
|
| Finish |
Textured powder coat |
|
The Turbojet Model 4200S shares most of the features of the 4200, except it has single speed motors that pull 13 amps each. It can be run with one or two motors in horizontal or vertical position. The 4200S does not have the soft start feature but produces the same CFM as the 4200 in "Low" speed mode.
|
|
TURBOJET 4200 FEATURES
• Dual 3 phase 1.5 HP motors
• Dual blowers
• Backward inclined blowers
• Low speed 13 amp & high speed 17 amp operation
• One or both motors can be used
• 3-stage certified HEPA filtration
• Mini-pleat HEPA filter triples filter life
• Horizontal or Vertical operation
• Control panel located at the top of machine
• Aluminum construction with steel reinforcement
• Attractive, durable powder coat finsh
• Operates on 15 or 20 amp circuits
• Exhaust Flange Kit available
• Soft Start
|
TURBOJET 4200S FEATURES
• Dual high efficiency motors
• Dual blowers
• Backward inclined blowers
• 13 amp operation
• One or both motors can be used
• 3-stage certified HEPA filtration
• Mini-pleat HEPA filter triples filter life
• Horizontal or Vertical operation
• Control panel located at the top of machine
• Aluminum construction with steel reinforcement
• Attractive, durable powder coat finsh
• Operates on 15 or 20 amp circuits
• Exhaust Flange Kit available
|
"All Turbojets can be run horizontally for easy attachment to floor registers or to connect to basement ducts without taking them down stairs."
|
Two motor operation requires 2 independent circuits.
|
|
|
Steambrite will ship the Air Care: Turbo Jet 4200 (220 volt) (Free Shipping!) Air Scrubber [CE4200-220] by either Fedex or Freight Quote, and will normally be shipped within 2-5 working days. Equipment small enough to be sent by Fedex should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
|
|
English
French
Spanish
German
Italian
Portuguese
