Sheen C-40
Semi Permanent Sealer
Sheen C-40 is a new generation water-based acrylic emulsion sealer that
penetrates the surface of concrete and masonry and forms a water repelling,
protective barrier. Sheen C-40 dries to a clear, high sheen (wet look) water
repellant finish. Sheen C-40 is extremely durable, will not discolor in
moisture and is ultra-violet resistant making it suitable for both interior
and exterior applications. This product is ideal for sealing concrete floors,
stained and acid stained concrete, exposed aggregate, stucco, saltillo tile
(Mexican tile) and cementaeous grout.
DIRECTIONS
Apply Sheen C-40 to a clean, dry surface by spray, mop or roller. One good
coat is sufficient for most industrial applications. On porous surfaces
a second coat is advised to afford more protection. Allow the first coat
to cure before recoating (minimum 1 hour). At 75 degrees the first coat
will be dry in about 30 minutes but allow the full hour for curing. The
coated area may be open for traffic in 24 hours. For exterior applications
do not apply when rain is imminent.
COVERAGE
Concrete (unsealed) 300-500 sq ft/gallon
Concrete (sealed) 1000-1500 sq ft/gallon
Brick 250-500 sq ft/gallon
Stucco 200-300 sq ft/gallon
Exposed Aggregate 300-500 sq ft/gallon
| 
