K1070-1 for only $40.00 - Steambrite's price on the Floor Finishes/Waxes - K1070-1 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Sheen C-40
Semi Permanent Sealer one gallon liquid

Sheen C-40 is a new generation water-based acrylic emulsion sealer that penetrates the surface of concrete and masonry and forms a water repelling, protective barrier. Sheen C-40 dries to a clear, high sheen (wet look) water repellant finish. Sheen C-40 is extremely durable, will not discolor in moisture and is ultra-violet resistant making it suitable for both interior and exterior applications. This product is ideal for sealing concrete floors, stained and acid stained concrete, exposed aggregate, stucco, saltillo tile (Mexican tile) and cementaeous grout.  Dries to a light sheen.  Very perminate.  Can be used to seal grout lines and stained and stamped concrete.

DIRECTIONS

Apply Sheen C-40 to a clean, dry surface by spray, mop or roller. One good coat is sufficient for most industrial applications. On porous surfaces a second coat is advised to afford more protection. Allow the first coat to cure before recoating (minimum 1 hour). At 75 degrees the first coat will be dry in about 30 minutes but allow the full hour for curing. The coated area may be open for traffic in 24 hours. For exterior applications do not apply when rain is imminent.

COVERAGE

Concrete (unsealed) 300-500 sq ft/gallon

Concrete (sealed) 1000-1500 sq ft/gallon

Brick 250-500 sq ft/gallon

Stucco 200-300 sq ft/gallon

Exposed Aggregate 300-500 sq ft/gallon