

Click here for the Manual.
System works by using supplied air compressor to drive a pneumatic motor at end of the vacuum hose to turn your choice of brushes.
System is controlled by two foot levers that are mounted on a powder coated metal plate that mounts to any rung of any fiberglass or aluminum ladder or can be placed on the floor. Dual foot petals. One is used for the One/Off and one is for Forward/Reverse.
The system does not require you to stop rotation to change directions. (hands free operation)
The system does not require you to remain stepping on the foot petal to use the tool. When you depress the peddle the unit stays on even if you remove your foot. To un-lock the cleaning action, just depress the foot petal again.
This system can be used with any commercial vacuum source. Truckmounted or portable carpet cleaning machine, or any dual motor shop or HEPA vacuum.
System includes:
Jumbo Nylon storage bag 40 X 50" (Color is not guaranteed.)
Reversible air duct motor
35 ft 2" vacuum hose
Nozzle Head is 2.75in, and can pass through duct work as low as 2.75.
25 ft of air line from the compressor to the foot plate.
Dual 47 ft long air line that runs from the foot valves to the cleaning nozzle head (35 ft is inside of the vacuum hose and 12 ft is outside of the vacuum hose and attaches to the air control plate.
Ladder mountable Step Controller.
10 GALLON, 120 PSI AIR COMPRESSOR (can be purchased without the air compressor for $150 less)
Heavy duty 4 HP rated motor

- Heavy duty 4 HP peak motor
- 5.6 CFM @ 90 PSI; 7.2 CFM @ 40 PSI
- Easy-start two capacitor motor
- Thermal overload protection
- Clear view oil window lets you know when its time to refill oil
- High impact ABS shroud for max. protection
- Easy-to-read pressure/regulator gauges indicate SCFM and PSI
- CSA , UL listed
-
Includes 3 Brushes (8", 12", and 18")
Dust-downer to spray water down the vacuum hose if you want to use with a carpet cleaning machine
Sell for $2098
Purchase all items and get a free cordless drill with 2 batteries. (to use to remove you vent covers)
Read more about this item on our Forum!
|