

Clean Storm 20230603, Camlock to Garden Hose Discharge Adapter Kit 1.5 Inch Type D to 3-4 Inch GHT Brass Nylon for Mytee 7000LX and Goliath
Description
The Clean Storm 20230603 Camlock to Garden Hose Discharge Connector Kit converts a 1.5-inch male camlock pump-out port into a standard 3/4-inch male garden hose connection for continuous wastewater drainage. Engineered specifically for high-output carpet extractors and flood restoration units such as the Mytee 7000LX and Clean Storm Goliath, this three-piece assembly bridges commercial cam-and-groove discharge fittings with residential and commercial drainage hoses. By combining a chemical-resistant polypropylene Type D female coupler, a heavy-duty white nylon reducer bushing, and a precision-machined triple-threaded solid brass adapter, the kit provides a leak-free, corrosion-resistant transition that handles high-volume water evacuation without restricting flow.
Features
- Complete Three-Piece Conversion System: Includes a 1.5-inch Type D female camlock coupler, a 1.5-inch MIP to 3/4-inch FIP white nylon reducer bushing, and a triple-threaded solid brass garden hose adapter.
- Triple-Threaded Brass Versatility: The solid brass adapter features 3/4-inch Male Garden Hose (MGH/GHT) threads on the outlet alongside dual-purpose 3/4-inch Male Iron Pipe (MIP) and 1/2-inch Female Iron Pipe (FIP) threads on the inlet.
- Corrosion and Chemical Resistance: Constructed from glass-filled polypropylene, industrial white nylon, and solid brass to withstand harsh carpet cleaning detergents, alkaline presprays, and wastewater.
- Tool-Free Quick Disconnect: The Type D female camlock coupler utilizes dual cam arms for rapid attachment and detachment from 1.5-inch male camlock pump-out ports without wrenches.
- Step-Down Flow Optimization: Smooth internal bore transitions minimize turbulence and backpressure when stepping down from a 1.5-inch pump discharge to a standard 3/4-inch drain hose.
Applications
- Mytee 7000LX Speedster and Mytee Flood Hog commercial carpet extractors equipped with 1.5-inch male camlock auto pump-out (APO) ports.
- Clean Storm Goliath portable carpet extractors and flood pumper units requiring direct garden hose discharge routing.
- Water damage restoration, flood extraction, and commercial carpet cleaning jobs routing wastewater to floor drains, sinks, or exterior areas.
- Industrial sump and transfer pumps utilizing 1.5-inch Type A or Type F male cam-and-groove fittings that need to adapt to standard 3/4-inch GHT hoses.
Specifications
| Brand |
Clean Storm / Steambrite |
| Assembly Part Number |
20230603 |
| Component 1 (Camlock Coupler) |
Steambrite 35944 Type D Female Camlock, 1.5 in. Camlock x 1.5 in. FIP, Polypropylene |
| Component 2 (Reducer Bushing) |
28678W / 28-678W Hex Reducer Bushing, 1.5 in. MIP x 3/4 in. FIP, White Nylon |
| Component 3 (Hose Adapter) |
30063 Triple-Threaded Adapter, 3/4 in. MGH (GHT) x 3/4 in. MIP and 1/2 in. FIP, Solid Brass |
| Inlet Connection |
1.5 Inch Female Camlock (Type D Cam and Groove) |
| Outlet Connection |
3/4 Inch Male Garden Hose Thread (MGH / GHT) |
| Swivel Mechanics |
Fixed / Non-Live Rigid Thread Assembly (Camlock ears rotate on pins for locking) |
| Materials and Finishes |
Black Polypropylene, Natural White Nylon, Uncoated Machined Brass |
| Maximum Operating Pressure |
125 PSI (Limited by polypropylene camlock and nylon bushing ratings) |
| Operating Temperature Range |
35°F to 140°F (2°C to 60°C) |
Includes one each of the following
Cross-Reference SKUs
| 20230603 |
| Clean Storm 20230603 |
| 35944 |
| Steambrite 35944 |
| 28678W |
| 28-678W |
| 30063 |
| Mytee 7000LX APO Adapter |
| Goliath Pump Out Hose Adapter |
Tips and Additional Information
Thread Sealing: Always apply 3 to 4 wraps of PTFE thread seal tape (Teflon tape) or a compatible liquid pipe thread sealant to the 1.5-inch MIP threads of the white nylon bushing and the 3/4-inch MIP threads of the brass adapter before assembly. Do not apply PTFE tape to the 3/4-inch Male Garden Hose (MGH) threads, as garden hose connections rely on a rubber washer inside the female hose coupling rather than thread interference to create a seal.
Alignment and Assembly: Hand-tighten the nylon bushing into the polypropylene camlock coupler, then finish with a wrench using moderate torque—over-tightening plastic and nylon NPT tapered threads can crack the female camlock housing. Thread the brass adapter into the 3/4-inch FIP port of the nylon bushing using the same care.
Live vs. Non-Live Mechanics: This is a non-live rigid adapter assembly. Because it does not incorporate a live rotary swivel, attach and unroll your garden hose before engaging the camlock arms onto the extractor, or disconnect the camlock before coiling the hose to prevent hose kinking.
Pre-Install Inspection: Before clamping the Type D camlock onto your extractor, inspect the black Buna-N rubber gasket seated inside the female camlock groove to ensure it is flat, clean, and free of debris or tears.
Frequently Asked Questions
Q: Does this adapter kit come pre-assembled or as separate components?
The kit ships as three individual components (the 35944 camlock coupler, 28678W nylon bushing, and 30063 brass adapter) so you can apply PTFE thread sealant to the tapered pipe threads and orient the fittings to your preferred tightness before use.
Q: Why does the brass adapter list both 3/4-inch MIP and 1/2-inch FIP on the same end?
Part 30063 is a triple-threaded dual-purpose fitting. The exterior of the inlet end is machined with 3/4-inch Male Iron Pipe (MIP) threads to screw directly into the 3/4-inch FIP port of the included white nylon bushing, while the interior bore is tapped with 1/2-inch Female Iron Pipe (FIP) threads for alternative plumbing configurations.
Q: Will this fit a Mytee extractor with a 2-inch camlock port?
No. The included Type D female coupler is sized specifically for a 1.5-inch male camlock adapter (such as those found on the Mytee 7000LX and Clean Storm Goliath). Verify that your extractor's discharge port measures 1.5 inches (approximately 2.1 inches outer diameter across the camlock grooves) before ordering.
Warranty & Safety Information
Warranty Coverage: Covered by Clean Storm and Steambrite's standard 90-day limited warranty against manufacturing defects in materials and workmanship under normal commercial and residential operating conditions.
Warranty Void Conditions: Warranty is voided by cracked housings resulting from over-torquing tapered NPT threads, exposure to incompatible solvents or concentrated acids, freezing water left inside the assembly, or operation beyond rated pressure and temperature limits.
Pressure, Temperature, and Safety Hazards: Do not exceed 125 PSI or 140°F (60°C), as elevated temperatures soften polypropylene and nylon threads and can cause sudden fitting separation under pump pressure. Always relieve pump pressure and turn off the extractor's auto pump-out switch before releasing the camlock arms to prevent hot wastewater spray hazards.
|