10972GB-US for only $7,284.85 - Steambrite's price on the Portable AC Units - 10972GB-US extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Ebac BKool-24 Portable Air Conditioner / 24,000 BTU Spot Cooler 10972GB-US

The Ebac BKool-24 is a commercial-grade 24,000 BTU portable spot cooler designed for warehouses, computer rooms, workshops, restoration drying jobs, events, temporary cooling, and other demanding indoor or covered outdoor applications.

This unit operates on 220–240 volt, single phase power and ships with a NEMA 6-20P plug. It provides powerful cooling through dual 4-inch adjustable cold-air outlets and includes a ductable condenser exhaust for indoor installations.

Key Features

• 24,000 BTU cooling capacity
• 559 CFM evaporator airflow
• 1,120 CFM condenser airflow
• Dual 4-inch adjustable cold air discharge hoses
• 12-inch condenser exhaust duct connection
• Digital thermostat control
• Heavy-duty steel cabinet
• Large caster wheels with brake
• Internal condensate collection tank
• Optional high-lift condensate pump available
• High and low pressure safety protection

Common Applications

• Server rooms and computer equipment rooms
• Warehouses and production areas
• Temporary office cooling
• Restoration and drying projects
• Special events and tents
• Workshops and industrial spaces
• Spot cooling people, equipment, or process areas

Inside vs. Outside Installation

Outside installation is generally preferred whenever practical.

The BKool-24 moves approximately 559 CFM of cooled evaporator air through the dual 4-inch directional ducts. During operation, the condenser section produces heat that must be removed from the area being cooled.

When the unit is installed inside and the hot condenser air is exhausted outdoors, the building can be placed under negative air pressure. Any air pushed outside must be replaced by air entering through doors, windows, wall gaps, outlets, and other openings. In hot or humid climates, this replacement air increases the cooling load and can reduce performance.

When the unit is installed outside under cover, the condenser heat is already outdoors. Indoor air can be ducted to the air conditioner, cooled, and returned back into the building. This can create a slight positive-pressure cooling effect, helping reduce hot, humid air infiltration.

Important: If placing the unit outdoors, it must be protected from rain and direct weather exposure. Use only in a covered, dry location with proper electrical power and proper air duct access.

Best Indoor Installation Method

If the unit must be installed indoors, the most efficient method is to duct both the condenser intake and condenser exhaust outdoors.

• Use the optional 8-inch condenser inlet adapter mounted over the front filter.
• Use 12-inch ducting from the top condenser discharge to move hot air outside.

This allows condenser air to enter and leave the unit without pulling hot, humid makeup air through the building envelope. Room air is drawn through the evaporator filter, cooled, and discharged through the two upper 4-inch cold air outlets.

Specifications

Recommended Accessories

• 12-inch condenser exhaust duct hose
• 8-inch condenser inlet adapter and ducting
• Window adapter for condenser discharge
• Optional internal condensate pump
• 240V power adapter or converter options when required

Shipping Note

This item ships by truck freight on a pallet. Liftgate, residential delivery, appointment delivery, limited access, missed delivery, or no-forklift fees may apply depending on the delivery location.

Summary

The Ebac BKool-24 is a heavy-duty 24,000 BTU commercial portable air conditioner built for spot cooling, temporary cooling, and industrial cooling applications. For best performance, install the unit outdoors under cover and duct cooled air into the space. If installed indoors, duct both condenser intake and condenser exhaust outdoors whenever possible.

Ebac BKool-24 Portable Air Conditioning 24000 BTU Spot Cooler AC 10972GB-US

PRINCIPAL OF AIR CONDITIONING

EIPL 44+ YEARS OF PROVEN EXPERIANCE

EIPL BKool RANGE

The self contained, “plug and play” equipment allows easy installation, just connect a suitable duct to the outlet and position, preferable outside, alternatively outside the space to be cooled, connect to a suitable power source and adjust the digital thermostat to the desired temperature.
Key Design Features
• Robust steel construction.
• Digital thermostat.
• Dual “Stay put” 4" (100mm) adjustable outlets.
• Large diameter castors with brake.
• Simplistic installation and operation.
• Integral Water Container.
• Ductable warm air outlet.
• Optional $175.00 internal high lift condensate pump (image right.)
• High pressure safety cutout.
• Low pressure safety cutout.

For use in computer rooms, workshops, warehouses, marquees, special events etc. A 4.6m length of condenser outlet hose is ideally required to vent the hot air removed from the space. A window adapter is available to fit on the end of the 300mm (12") diameter hose. To increase efficiency a 200mm (8") inlet hose and an adapter can be used to bring fresh air into the condenser.  

Optional plug in everywhere in every building in the USA, Canada, Mexico, and Japan. Allows you to plug your 240 volt AC unit into standard 120 volt outlets! Works with all brands of 240 volt portable and window based AC units that draw less than 20 amps at 240 volts. Power Joiner Level 2 Step Up Inverter Electric AC Converts Dual 20 amp 115 Volt outlets to 240 Volt 3 wire 20 amp Use [Reverse6-20R]           Videos On Link!

Optional DriStorm CSF382 Ducting 8 inch X 15 ft for use with DefendAir Hepa 500 & EB1400 and Explosion Proof Air Movers SVH15 Ventilation Hose Kit 200mm Diameter for use with optional inlet adapter. You can also place over both 4" cool out hoses to further push the cool air to a preferred location or though a window. Video On Link!

Hot air that comes out of the top of the unit can be ducted and moved through a window with this ducting.                                                        Optional DriStorm 12 Inch Ventilation Ducting with Storage Bag-A-Duct 25 ft AC517 Hose [20120122] 300mm  Condenser Discharge Hose  Condenser outlet hose is ideally required to vent the hot air removed from the space when unit is indoors.  When you leave the main unit outdoors you do not need to use this feature.

NEMA 6-20P Plug 20 amp 240 volt replacement end For 10 and 12 Awg Wire FREE Shipping 8.709-656.0

Q. Which is better: Inside installation or outside installation?

A. Outside installation is generally the preferred option whenever practical.

The portable air conditioner moves approximately 559 CFM (cubic feet per minute) of air through the condenser section and exhausts that air through the dual 4.5-inch directional ducts. During the cooling process, the condenser generates heat that must be removed from the system.

Outside Installation (Preferred)

When the unit is placed outside the building, the heat generated by the air conditioner is already outdoors, eliminating the need to exhaust hot air from inside the conditioned space.

The advantages include:

• Creates a slight positive-pressure cooling system

• Reduces infiltration of hot, humid outdoor air

• Improves overall cooling efficiency

• Helps keep dust, pollen, and contaminants from entering the building

• Eliminates the need for additional hot-air exhaust ducting

In this configuration, indoor air is ducted to the air conditioner, cooled, and then returned to the building. This is similar to many commercial HVAC systems that introduce conditioned air into a building, creating positive pressure. You may have noticed air blowing outward when opening the door of a large commercial building—this is a result of positive building pressure.

Important: If installing the unit outdoors, place it in a covered location protected from rain and direct weather exposure. You must also provide:

• Proper electrical power

• An air-return duct from the building to the unit

• A cooled-air supply duct back into the building

Inside Installation

When the unit is located inside the building and the condenser air is exhausted outdoors, the building operates under negative pressure.

Because approximately 559 CFM of air is being pushed outside, that same volume of air must be replaced. Replacement air typically enters through:

• Doors

• Windows

• Wall penetrations

• Electrical outlets

• Gaps around the building envelope

In most climates, this replacement air is hot and humid, which increases the cooling load and reduces system efficiency.

Best Indoor Installation Method

If the unit must be installed indoors, the most efficient setup is to duct both condenser intake and condenser exhaust air outdoors.

This configuration uses:

• An 8-inch duct connected to the condenser inlet adapter mounted over the side coils

• A 12-inch duct connected to the condenser exhaust at the top of the unit

With this arrangement, approximately 1,120 CFM of condenser airflow is moved both into and out of the unit without affecting room pressure. The conditioned space remains neutral, preventing the unit from pulling hot, humid outdoor air through cracks and openings.

Meanwhile, room air is:

1. Drawn through the front evaporator filter,

2. Cooled by the system,

3. Delivered back into the space through the two upper discharge hoses.

Summary

Bottom Line: For maximum cooling performance and humidity control, place the unit outdoors under cover and duct the return and supply air through the wall. If indoor installation is required, duct both the condenser intake and condenser exhaust outdoors to avoid creating negative pressure inside the building.