Ebac Industrial Restoration Dehumidifier with pump CD425 1018110
The Ebac 425 was developed to serve the demands of industry for environmental control of very large areas as well as areas with severe conditions. Warehouses factories, offices and other large-scale facilities with ambient temperatures ranging from 33 F to over 100 F can be cured of humidity and condensation problems efficiently and automatically without over burdening costly HVAC systems. The CD425 can be utilized singly or in multiple units to provide protection on any scale. Ducted applications are possible where design requirements specify.
Welded steel chassis with baked epoxy and vinyl coatings for abrasion resistance.
An adjustable humidistat, to control the level of dryness desired.
System lamps to tell the operating status of the unit at a glance.
Ebac's unique "Hot Gas" defrosting systems.
Rugged design for harsh industrial environments.
Gravity drain model
Operating Range: 33F - 105F
Volts: 220V, (3 PHASE REQUIRED)
Capacity: 285 ppd @ AHAM (80F, 60%rH), 50 gallons at saturation
Height: 47", Width: 43", Depth: 19"
Weight: 353 lbs.
These units are in stock. Because of the
cost of these units, our quality control program requires that we do a complete diagnostic of the
machine prior to shipping to ensure the best of quality. This delays shipping by approximately 2-5 days. Thus from the time of order, it takes approximately 7-10 business days to recieve the unit.
Whenever there is a need for fast, dependable, energy-efficient drying, Ebac can provide the answer.
As a reminder, customers MUST be present to sign for shipments. Ebac is not liable for any damages or warranty claims that are brought to our attention after a customer has left a note telling the carrier that it is OK TO LEAVE a shipment at the customer's residence or delivery address without them being present. All shipments should be carefully inspected before accepting delivery to ensure item is delivered free of damage.
You can check current warehouse Ebac Dehumidifier stock here