Ebac Industrial Pd200 Dehumidfier---10 Amps 2HP 560 824 Cfm 230 Volt-international Use

Ebac PD200 Industrial Restoration Dehumidifier 230volt Single Phase [PD200]

Click to enlarge

Your Price: $4,337.94
Part Number: PD200
Quantity:
Estimated shipping cost: $ 259.00

Product Options
Extended Warranty:
Shipping Surcharges:

EBAC Industrial PD200 Dehumidfier 10 Amps, 2HP, 560/824 CFM, 230 VOLT-

PD200 Dehumidfier
230 Volt
ebac pd200 swimming pool dehumidifier

The largest of Ebac's PD series dehumidifiers, the PD200 exhibits the same flexibility
as the PD120 but with more capacity. Under harsh conditions this unit will remove
more that 300 pounds of water per day from the environment. Ideal for swimming
pools, spas, locker or laundry rooms, this unit can also be used in commercial
and industrial environments where moisture control is required. A rugged, reliable
machine that solves a wide variety of moisture problems.

Features:

Quiet multi-speed fan
Self-contained for easy installation
Remote adjustable humidistat
Removable and washable air filter

Power Supply: 230V/1PH
Running Amps: 10
Compressor: 2HP, high efficiency
Air Flow: 560/824 CFM
Height: 18", Width: 26". Depth: 27"
Weight: 174 lbs.
Capacity: 200 ppd@AHAM (80F 60%RH)

Specifications

MODEL: Ebac PD200
HEIGHT: 18”
WIDTH: 27.2”
DEPTH: 26.4”
WEIGHT: 155 lbs
AIRFLOW:
Low 580 CFM
High 660 CFM
HORSEPOWER: 3
POWER SUPPLY: 220V/60Hz/1ph
FINISH: Powder-coated Epoxy
REFRIGERANT TYPE/QTY: R22

Print Technical Specifications

How the Ebac PD200 Dehumidifier works

The Ebac PD200 industrial dehumidifier removes moisture from the air through the refrigeration process. The Ebac PD200 is basically comprised of:
- A compressor
- A refrigerant evaporator coil
- A refrigerant condenser coil
- One circulation fan
- A remote humidistat
- A cabinet to house the above components
- Gravity Drain
The fan draws the moist air through the cold evaporator coil which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray which is equipped with a permanent drain. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is therefore discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than with which it entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area.

The Ebac PD200 dehumidifier is a rugged, reliable drying dehumidifier designed to operate effectively over a broad range of temperature and humidity conditions.

The Ebac PD200 dehumidifier uses a remotely mounted adjustable humidistat to enable you to select the level of dryness.

Proven Performance

The PD range of dehumidifiers are available in 2 sizes, 1HP & 2HP, providing adequate building blocks to allow correct sizing for all applications. Both units are equipped with temperature sensitive defrost, this unique feature ensures full drying capacity across the wide operating temperature range. Underside runners, with pre-drilled mounting points, along with included duct flanges ensures installation time is kept to a minimum.
Stock on Hand

As a reminder, customers MUST be present to sign for shipments. Ebac is not liable for any damages or warranty claims that are brought to our attention after a customer has left a note telling the carrier that it is OK TO LEAVE a shipment at the customer's residence or delivery address without them being present. All shipments should be carefully inspected before accepting delivery to ensure item is delivered free of damage.
Schematics

Steambrite will ship the Ebac PD200 Industrial Restoration Dehumidifier 230volt Single Phase [PD200] by either Fedex, UPS, USPS, or Freight Quote, and will normally be shipped within 2-5 business days (if in stock). Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Special order, or custom build items may take up to 30 days.
Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Friday 21 October, 2011.

Product Datasheet

PD200 for only $4,337.94 - Steambrite's price on the Industrial and Lumber Dehumidifiers - PD200 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

EBAC Industrial PD200 Dehumidfier 10 Amps, 2HP, 560/824 CFM, 230 VOLT-

How the Ebac PD200 Dehumidifier works

Proven Performance