

HydraMaster 000-038-066 Heat Exchanger - Boxxer 318 Truckmount
Genuine HydraMaster Replacement Heat Exchanger
Manufacturer Part Number: 000-038-066
Replacement 4-row heat exchanger designed for use in compatible HydraMaster Boxxer truckmount carpet cleaning machines. This heat exchanger is part of the machine's water heating system and transfers heat to the cleaning solution during operation.
This replacement heat exchanger is identified as a 4-row, 6 x 8, 16-fin heat exchanger.
Product Specifications
| Manufacturer |
HydraMaster |
| Manufacturer Part Number |
000-038-066 |
| Product Description |
Heat Exchanger, 4 Row |
| Heat Exchanger Configuration |
4 Row |
| Nominal Size |
6 x 8 |
| Fin Specification |
16 Fin |
| Associated Model |
HydraMaster Boxxer 318 |
| Additional Reference |
318HXAM |
| Listed Weight |
12 lbs |
| Product Type |
Truckmount Heat Exchanger Replacement Component |
OEM Part Number Cross References
This heat exchanger may be identified in equipment parts diagrams, service documentation, or older parts listings using the following numbers:
- 000-038-066 - HydraMaster Part Number
- 115893 - Associated Reference Number
- 1683-1950 - Associated Reference Number
- 318HXAM - Associated Heat Exchanger Reference
Important: These numbers are provided for cross-reference identification. Verify compatibility using your machine's serial number and the manufacturer's parts diagram before ordering.
Equipment Compatibility
HydraMaster Boxxer 318 Truckmount Carpet Cleaning Machine
This heat exchanger is associated with the HydraMaster Boxxer 318 heating system.
HydraMaster has manufactured multiple Boxxer configurations and revisions over the years. Heat exchanger configurations, mounting arrangements, and plumbing connections may differ between machines.
Before ordering, confirm that your original heat exchanger matches HydraMaster part number 000-038-066.
Parts Diagram Identification
Illustrated Parts Diagram: Item Number 7 Only
When referencing the product illustration, this listing is for Part #7 only.
Other components shown in the illustration are provided for identification purposes and are not included unless specifically stated.
Only the heat exchanger identified by HydraMaster part number 000-038-066 is being purchased.
When Should a Heat Exchanger Be Replaced?
A damaged or restricted heat exchanger can interfere with the heating performance of a truckmount carpet cleaning machine.
Common reasons for inspecting or replacing a heat exchanger include:
- Water leaks from the heat exchanger assembly.
- Internal corrosion or physical damage.
- Mineral scale restricting water circulation.
- Reduced cleaning solution heating performance.
- Cracked or damaged heat exchanger connections.
- Failure of the original heat exchanger.
Service Note: Reduced water temperature does not automatically indicate a defective heat exchanger. Thermostats, bypass valves, water flow, plumbing restrictions, and other heating system components should also be inspected.
Installation and Service Recommendations
Installation should be performed by a qualified technician familiar with HydraMaster truckmount heating systems.
- Allow the equipment to cool completely before servicing.
- Shut down the engine and relieve water system pressure.
- Confirm the replacement part number before removing the original component.
- Inspect hoses, fittings, and mounting hardware for damage.
- Check the system for leaks after installation.
- Verify normal water circulation and operating temperature.
Use the appropriate HydraMaster service documentation for your specific truckmount model and serial number.
Ordering Information
Manufacturer: HydraMaster
Part Number: 000-038-066
Item: Boxxer 318 Heat Exchanger
Quantity: One Heat Exchanger
IMPORTANT - ALL HYDRAMASTER ORDERS ARE FINAL, NON-CANCELLABLE, AND NON-REFUNDABLE.
Please verify your equipment model, serial number, and required replacement part number before placing your order.
Product photographs and parts illustrations are provided for reference. Orders are fulfilled according to the manufacturer's part number.
Specifications, appearance, and manufacturer part configurations are subject to change without notice.
In photo Part 7 Only

Optional
 |
Magnetic Clamp-On Water Softener Descaler for Truckmount & Portable Carpet Cleaning Machines 20260425
- Helps prevent scale buildup in pipes, coils, heaters, and carpet cleaning heat exchangers
- Reduces or eliminates routine monthly descaling in many applications
- Clamp-on installation — no cutting, plumbing, salt, chemicals, or cartridge replacement
- Maintenance-free design — no salt, resin, plastic pellets, filters, or media to flush
- Improves heat transfer efficiency by helping keep mineral buildup off heater surfaces
- May improve water flow / GPM by helping reduce mineral restriction over time
- Only 4 inches long for installation in tight areas on portable and truckmount equipment
- Longer Equipment lifespan
|
|