

Clean Storm 28115, Brass Hex Bushing Reducer 1 in MIP by 3/4 in FIP High-Pressure Fluid Fitting
Description
The Clean Storm 28115 Brass Hex Bushing Reducer steps down 1-inch female pipe ports to 3/4-inch male threaded connections for leak-free fluid transfer in pressure washers and industrial plumbing systems. Machined from heavy-duty solid brass, this corrosion-resistant pipe adapter provides superior mechanical strength and vibration resistance compared to standard cast or plastic fittings. Its precision-cut National Pipe Taper (NPT) threads ensure a tight, dependable seal under demanding operating pressures, making it an essential replacement component for commercial cleaning equipment, pump manifolds, and high-pressure water lines.
Features
- Solid machined brass construction delivers exceptional resistance to rust, galvanic corrosion, and thermal expansion.
- Precision-cut 1 in Male Iron Pipe (MIP) and 3/4 in Female Iron Pipe (FIP) tapered NPT threads prevent cross-threading and weeping leaks.
- Integrated hexagonal wrench flats allow for secure, high-torque installation without rounding or distorting the fitting body.
- Compact reducer profile minimizes space requirements in tight pump manifolds, bypass loops, and unloader assemblies.
- Direct OEM-grade replacement for Legacy and Karcher part number 8.705-134.0 and numerous industry-standard brass hex bushings.
Applications
- Commercial and industrial cold-water and hot-water pressure washer pump inlets and discharge manifolds.
- High-pressure fluid transfer lines, chemical injection systems, and soft-wash proportioning skids.
- Pneumatic air compressor manifolds, shop air drops, and industrial hydraulic return lines.
- Plumbing reducer transitions in car wash bays, agricultural sprayers, and municipal maintenance equipment.
- Compatible with water, air, oil, non-corrosive gases, and standard pressure washing detergents.
Specifications
| Brand |
Clean Storm |
| Part Number |
28115 |
| OEM Reference Number |
8.705-134.0 |
| Fitting Type |
Hex Reducer Bushing (Rigid / Non-Swivel) |
| Male Thread Size |
1 in MIP (Male Iron Pipe / NPT) |
| Female Thread Size |
3/4 in FIP (Female Iron Pipe / NPT) |
| Material |
Solid Machined Brass |
| Finish |
Natural Unplated Brass |
| Swivel Mechanics |
Fixed / Rigid Body (Requires Thread Sealant) |
| Maximum Operating Pressure |
1,200 PSI (Typical Brass Pipe Rating) |
| Operating Temperature Range |
-65°F to 250°F (-53°C to 121°C) |
| Wrench Hex Size |
1-3/8 in Hex Flats |
Cross-Reference SKUs
| 28115 |
| 8.705-134.0 |
| 87051340 |
| 06110-1612 |
| 061101612 |
| 106-0165 |
| 1060165 |
| 110 1 x 3/4 |
| 110-16-12 |
| 110-1612 |
| 1101612 |
| 110-HE |
| 110HE |
| 110A-FE |
| 110AFE |
| 110NJ |
| 209-1612 |
| 2091612 |
| 209P-16-12 |
| 209P1612 |
| 23236x12 |
| 23236X12 |
| 3220x16x12 |
| 3731612C |
| 73220-16-12 |
| 732201612 |
| HB6F8M |
| PF209-16-12 |
| PF2091612 |
| PRB-16-12 |
| PRB-1612 |
| PRB1612 |
| 140410T |
| 2-10813 |
| 210813 |
Tips and Additional Information
Because the Clean Storm 28115 is a rigid, non-swivel NPT pipe bushing, the tapered threads rely on mechanical deformation and thread sealant to form a pressure-tight seal. Before installation, inspect both the external 1-inch MIP threads and internal 3/4-inch FIP threads for burrs, debris, or old sealant residue. Apply high-density PTFE thread seal tape (wrapped clockwise 3 to 4 turns) or an anaerobic pipe thread sealant rated for your fluid media to the male threads only, leaving the first thread bare to prevent sealant shreds from entering pump valves or spray nozzles. Hand-tighten the bushing to ensure proper thread alignment and avoid cross-threading, then use a properly sized open-end wrench on the hex flats to tighten 1.5 to 3 turns past finger-tight. Do not over-torque, as excessive force can crack female pump housings or distort the brass fitting.
Frequently Asked Questions
Q: Does this brass bushing have a built-in O-ring or swivel mechanism?
No, this is a fixed, rigid hex reducer bushing with standard tapered NPT pipe threads (1 in MIP by 3/4 in FIP). It does not swivel and requires PTFE tape or liquid thread sealant to create a watertight seal.
Q: Will the Clean Storm 28115 fit a standard 3/4-inch garden hose thread (GHT)?
No. This fitting uses 3/4-inch Female Iron Pipe (FIP / NPT) tapered threads, which have a different thread pitch and diameter than standard Garden Hose Threads (GHT). Connecting a garden hose directly to FIP threads will result in cross-threading and severe leaks.
Q: Can I use this fitting on the high-pressure discharge side of a 4,000 PSI pressure washer?
Standard brass pipe bushings are typically rated up to 1,200 PSI depending on temperature and line surge. This fitting is primarily intended for pump inlet supply lines, bypass plumbing, tank feeds, and low-to-medium pressure transfer applications rather than 4,000 PSI discharge lines.
Q: Is this part an exact dimensional match for Legacy / Karcher 8.705-134.0?
Yes, the Clean Storm 28115 is manufactured to identical 1-inch MIP by 3/4-inch FIP NPT specifications and serves as a direct drop-in replacement for part number 8.705-134.0.
Warranty & Safety Information
The Clean Storm 28115 Brass Hex Bushing is warranted against defects in materials and workmanship under normal intended use. Warranty coverage is void if the fitting is damaged due to over-torquing, cross-threading, freezing water expansion, chemical incompatibility, or operation beyond rated pressure and temperature limits. Safety Warning: Always shut off equipment, relieve all trapped system pressure, and allow hot fluid lines to cool completely before installing or removing threaded fittings. Never exceed the maximum working pressure of the lowest-rated component in your plumbing assembly, and wear ANSI-approved eye protection when working with pressurized fluid or pneumatic systems.
|