Kingston 251-30 1200 psi brass valve G00526-1 [251-30]

Click to enlarge

Your Price:

Quantity	1+	2+	4+	8+	16+
Price for each	$16.94	$16.00	$15.00	$14.00	$13.00
Your savings	-	6%	11%	17%	23%

Part Number: 251-30
Quantity:
Estimated shipping cost: $ 8.00

Kingston 251-30: 1200 psi brass valve

THIS PRICE IS BELOW DEALER PRICE!!
NO PHONE ORDERS, MUST BE PURCHASED ON-LINE.

Description

G00526-1 Model 251-30 offers quality and performance at pressures up to 1,200 PSI. This valve is made of a forged brass body with a stainless steel stem assembly. The 30 degree angle eliminates the cost and labor required to attach an additional 30 degree elbow fitting. The 251-30 provides a superior pressure rating as well as the craftsmanship and durability of the standard 251FT-2-2.

Max. operating pressure 1200 PSIG Temp. range –40°F to 225°F

Repairs EDIC Glidemaster Wands and Stairwands

Kingston or equivalent of equal performance, and ratings:

Compare to current or past OEM associations:

EDIC G00526-1
PCMPV1175
8.632-727.0
86327270
Powrflite PX10B

Important information

Coronavirus Prevention and treatment Procedures Cleaners and Supplies Step By Step 11136038

Steambrite will ship the Kingston 251-30 1200 psi brass valve G00526-1 [251-30] by either Fedex, UPS, USPS, or Freight Quote,, and will normally be shipped within 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Sunday 06 February, 2005.

Product Datasheet

Customers who bought this also bought:

HydroForce AB19 Grandi Groomer Carpet Rake With Brush Combo A56552	Pumptec 207V Pump Head Only 60065 86318990 (replaces 204v 60029 60035 60062 8.630-282.0) PT065	Pumptec 70034 Unloader Pressure Regulator 450-500 PSI - MV520 - 3/8 M(2) F(1) Ports Blue Spring VR54
Mytee H124V 2 inch Mip to 2 inch Female Vinyl Cuff-Lynx Starter - SINGLE	Mytee H135V Vinyl Hose Cuff-Lynx Vacuum Hose Connector 2in Female Links X 1.5 Female Vac Hose (Single)	Steambrite Turbo Heat Thermo Retention Hose 100 ft 3000 psi 250 degree Holds in More Heat 20200303 Nylon Braid 3/8 ID
BE Pressure 85.300.072 Water Box Float 3/4in Mip 145 psi	Hydroforce AH050 QC QD Slammer Removes Pressure From Solution Hose 1663-3632	Pumptec 80011 356U 360U 1200psi 190 Bearing M64 Motor 120/240V AP48 Mytee C359B C359A Sandia 80-0112 G13333
Ametek Lamb 122176-18 Vacuum Motor Blower 8.4 Inches 120 volts Tangential 2 Stage 1 Speed AV20	Pressure Gauge 2000 psi Panel Back Mount H308D 8.710-257.0 536169 8.712-135.0 536169	Little Giant Pilot Orifice for 3HT heaters POLP