

Kohler PA-CH270-3152 Command Pro Horizontal Shaft Single Cylinder 7ph Engine Replaces PA-CH270-3011
PA-CH270-3011, CH270-1011, 706028, and CH270-0011
Compare to current or past OEM associations
0885612358271
PACH2703152
1658655721
B00CGVWU2C
This is a manufacturer substitution.
Part may differ in appearance but is a functional equivalent to prior parts including; PA-CH270-3011,PA-CH270-0011,PA-971501,PA-911501,PA-971502,PA-911502

Standard Features:
• Overhead Valve Design
• Electronic Ignition
• Quad-CleanTM 4-Stage All-Season Heavy Duty Cyclonic Air Cleaner (Unless otherwise mentioned)
• Dual Oil Fill Locations and Oil Drains
• Cast Iron Cylinder Liner
• 4.1 L Metal Tank w/Strainer
• Fuel Shut-off Valve (Unless otherwise mentioned)
• Stellite® Exhaust Valve
• Engine Mounted Throttle and Choke Controls, Remote
Throttle Ready
• Oil SentryTM Switch Installed (No Light)
• Dual Ball Bearings, PTO and Flywheel
• Metal Blower Housing
• Indexable Recoil Starter • PTO Face • For engines with SAE crankshaft: 3.625” (92.08 mm) Diameter (4 + 1 Holes) 5/16-24 UNF-2B x 15 deep • For engines with Metric crankshaft: 3.625” (92.08 mm) Diameter (4 + 1 Holes) M8x1.25-6H x 15 deep • Large Capacity Muffler w/Heat Shield and Spark Arrestor • Multi-language Owner’s • Color - Black with Cast Aluminum • Important Compliance Information: 1.Specs containing -3XXX are CARB Tier III, EPA Phase 3 and RFI compliant (Can be sold globally) 2.Specs containing -0XXX are EU Stage 2 and RFI compliant (For sale in EU, Australia and New Zealand) 3.Specs containing -1XXX do not meet any compliance. These engine cannot be sold in US, Canada, EU, Australia and New Zealand (For sale in rest of the world)
Standard Features Plus: • Crankshaft - 3/4” Diameter x 2.42” PTO Length, Straight Shaft w/Keyway, Variable Speed
User-Friendly.
Interference free PTO face provides flexibility to power any application without modification to the equipment. Dual oil fills and drains and easy access throttle, choke and shutoff make operating and maintaining this engine a breeze.
Durable, Long Life Design.
Features steel-forged crankshaft, cast iron cylinder bore, tough Stellite® faced exhaust valve with Tuftride® coated stems and dual ball bearings for maximum side load characteristics. Also, the Quad-Clean™ four-stage cyclonic air filtration system ensures only the cleanest air is entering the engine, maximizing engine power and life.
Increased Efficiency.
The KOHLER advanced ignition system reduces fuel consumption , while the large capacity fuel tank allows for longer runs between fill-ups. Combined, these two features will save you time and money.
User-Friendly Maintenance.
- Interference free PTO face
- Dual oil fills and drains
- No tools required all season air cleaner
- Easy access throttle, choke and shutoff
- Oil Sentry™ automatic low oil engine shutdown system
- Carburetor bowl drain
High Power Performance.
- Overhead valve design
- Increased displacements
- High-inertia flywheel
Extended Run Times.
- Large metal fuel tank and chrome plated cap
- Swirl induction combustion chamber
Quiet, Smooth Operation.
- Oversized muffler with heat shield
- Mechanical governor
- Sound-deadening alloy crankcase
- Silenced air intake
Easy Dependable Starts.
- Electronic ignition system
- Automatic compression release
- Dual ball bearings
- Indexable, easy pull recoil starter
Reliability and Long Life Design.
- Quad-Clean™ heavy-duty cyclonic air cleaner
- Warm air intake system for cold weather operation
- Cast iron cylinder bore
- Steel-forged crankshaft
- Stellite-faced exhaust valve
- Water trap to separate moisture in fuel
- 3 fuel filters: fill neck, in tank, and carburetor inlet
- 3 year commercial warranty
Engine Type:
4-cycle, gasoline, OHV, cast iron cylinder liners, aluminum block
| Max Power @3600 RPM hp (kW) 1 |
7 (5.2) |
| Displacement cu in (cc) |
12.7 (208) |
| Bore in (mm) |
2.8 (70) |
| Stroke in (mm) |
2.1 (54) |
| Max Torque lbs. ft (Nm)1 |
9.2 (12.4) |
| Compression Ratio |
8.5:1 |
| Dry Weight lbs (kg) |
38.7 (17.5) |
| Oil Capacity U.S. quarts (L) |
0.63 (0.6) |
| Lubrication |
Splash |
| Dimensions L x W x H in |
12.7 x 15.2 x 14.2 |
| Backpressure Limit 2 |
30 |
| J1995 Power hp (kW) 3 |
6.1 (4.6) |
| J1995 Torque lbs ft (Nm) 3 |
9.7 (13.1) |
* Measurements are based on a recoil-start engine.
1 Max Power (hp) and Max Torque (lbs ft) specifications for Kohler general purpose engines are rated pursuant to Society of Automotive Engineers (SAE) J1940 based on gross output testing performed according to SAE J1995 without the air cleaner and muffler. Actual engine power and torque are lower and affected by accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc.), application, engine speed, ambient operating conditions (temperature, humidity and altitude) and other factors. This J1940 / J1995 rating provides consistent measurement to customers who may want to control the intake and exhaust features of the engine. For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.
2 Inches of H20 @ 3600 RPM WOT
3 J1995 power and torque certified by 3rd Party Witness
This Kohler engine is manufactured in China.
The height from the bottom of the base to the center of the shaft for this Kohler engine is 4.173 inches
When measured from the center of one bolt to the center of another diagonally , the bolt circle is 3-5/8"
The keyway is a straight 3/16".
Owners Manual
Service Manual
Comfortable Operation.
A fully integrated system, including oversized muffler, sound-deadening alloy crankcase and silenced air intake provide smoother, quieter performance.
Reliable Starting.
In colder months the Quad-Clean™™ air filter cover can be reconfigured, no tools required and in a matter of seconds, to recycle engine heat. Along with the advanced electronic ignition, automatic compression release, and dual ball bearings the Command PRO® provides effortless starts in all weather and conditions.
Equipment Types
This engine powers the following equipment:
- Aerator
- Chipper/Shredder
- Dethatcher
- Edger
- Logsplitter
- Pressure Washer
- Pump - Other
- Stump Grinder/Cutter
- Tiller
- Aerator
- Compressor
- Dethatcher
- Edger
- Portable Generator
- Pressure Washer
- Shredder
- Tamper/Plate Compactor
- Tiller
|

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Kohler PA-CH270-3152 Command Pro Horizontal Shaft Single Cylinder 7ph Engine Replaces PA-CH270-3011 GTIN 0885612358271 [PA-CH270-3152]
Click here for our full shipping policy. Specifications are subject to change without notice. Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.
|
|