Mytee 7303LX II P, (Version 2) Air Hog Vacuum Booster, Dual 6.6 in Vac (Hose Mount), Price Matched [7303LX II P]

Click to enlarge

Your Price: Add to cart to see price
Part Number: 7303LX II P
Quantity:
Estimated shipping cost: $ 104.00

Mytee 7303LX Air Hog Hose mounted vacuum booster (Version 2) Price Matched

Hose mount means you install it between two sections of vacuum hose
Install on your last 50-65 ft next to your wand for an unlimited distance!
Provide an addition 213 cfm of vacuum to your hose run!
Upgrade to 14" and 15" wide cleaning tools to clean up to 30% faster!

Compare to current or past OEM associations:
PBCA 120V
MY7303LX

Two 6.6 LX motors installed.

Here’s a Mytee® product that’s about to become an indispensable part of your cleaning arsenal – the 7303LX Air Hog™ Vacuum Booster. But it’s actually much more than just a vacuum booster; use it as a stand-alone extractor.

Four Ways to Use your LX Air Hog™:

With this specially designed Air Hog™ model, you add up to 250 CFM (SteamBrite test 213 CFM @ 1000 ft above sea level) to your existing extractor for unmatched performance on long hose runs, giving you increased suction, leaving carpets dryer.
This versatile unit can also be used as a stand-alone extractor with your Mytee T-REX™ or carpet wand.
You can also “daisy chain” multiple Air Hog™ vacuum boosters to complete bigger jobs more efficiently, without unnecessary downtime.
Only one outlet available? No problem. Use only one power cord to run a single vacuum motor. You will still have powerful performance with 180 CFM and 113″ of water lift when running one vacuum motor.

Features:

7 gallon tank
Dual exclusive Mytee® Ametek Hybrid vacuum motors series mounted

Factory Installed
Mytee C348 Ametek Lamb Vacuum Motor Blower 6.6 Inches W/ 2in inlet tube CONE 120 volts Tangential 2 Stage 1 Speed
Amp draw is 9.5 occluded / 15.5 open flow = average 12.5 amps when you have lots of vacuum hose and wand on the floor.

Factory Installed
Ametek Lamb 122628-00 Lamb 6.6 Inch Vacuum Motor Blower 120 volts Tangential 2 Stage 1 Speed Mytee C347
Same amp draw as above motor.

225-250 CFM (SteamBrite test 213 CFM @ 1000 ft above sea level)
182″ water lift (SteamBrite test 15" HG / 204" water lift - see video)
43,452 Vacuum units (using formula Inches of water lift @ zero cfm X (times) water lift @ zero cfm)

Factory Installed
Aquatec 60psi Pump Out Pump 3.5 GPM 115 Volt Auto Dump Out Mytee C381 5503-2E6E-B586
Full time Automatic Waste Water Drain
Discharges through garden hose (not provided)

Float shut-off valve
Durable roto-molded polyethylene housing
Circuit locator indicator light
Lightweight, 40 lbs, allows anyone to carry this unit virtually anywhere
3″ locking casters
Factory Installed
Mytee H667 3 inch Locking Front Caster (or similar)
4 units

Includes:

1- H110V 2″ to 2″ Female Vinyl Cuff-Lynx Coupler Reducer
1- H141V 2″ to 1.5″ Vinyl Cuff-Lynx Reducer
1- H136V 2″ to 2″ Male Vinyl Cuff-Lynx Coupler
Dual 25′ extension cords

Extension Power Cord 12-3 X 25 feet Heavy duty SJTW 15A-125V Lighted Ends 10-0860 30-071 E531 AX32 860836 D16612025 D11712025BL 12/3 EC0005
Two Units Factory Provided in Box / or similar
(color not guaranteed)

FAQ:

Can I use the Air Hog™ in conjunction with my truck mount?
Yes. However, in order to avoid damage to the unit it is critical that you first turn on the vacuum motors on the vacuum booster.
Then turn on the truck mount vacuum motors only after the vacuum booster vacuum motors are already running.

Recovery Tank	7 gallons
Vacuum Motor	Dual exclusive Mytee® Ametek Hybrid Motor
CFM	225 (Both Motors On)
Water Lift	204" (Both Motors On)
Pump-Out GPM	3.3
Casters	3" locking casters
Power Cord	Dual 25' 12/3 extension cords
Amp Draw	Cord 1: 16 amps \| Cord 2: 15 amps
Product Weight	40 lbs.
Shipping Weight	60 lbs.

Note: Both Mytee and SteamBrite reserve the right to change the exact specifications, including but not limited to parts used in the build without notice and without obligation to retrofit any previously produced machines. Equipment is sold by part number only. Equipment design and parts used for the build are subject to change without notice.

Question: Does the Mytee 7303LX include the vacuum hose Lynx connections?
Answer: No, please purchase both H136V and the H110V connectors to use this machine.

Question: Are we supposed to use 1.5" ID or 2" ID vacuum hose with this machine?
Answer: 2" ID vacuum hose is recommended to join this booster to your current or existing machine as well as to travel on the way to your cleaning tool. Most cleaners that are using 1.5" vacuum hose might only do so the last 10 to 15 ft next to the cleaning tool/wand. Example: Main extractor < short 5 to 10 feet of 2" vacuum hose < Mytee 7303LX < 50 ft 2" ID vacuum hose < Reducer < 15 ft of 1.5" ID vacuum hose < Cleaning tool/wand.

Question: Can I use any of these power cords on the same breaker as my current carpet and tile cleaning machine?
Answer: No, this machine is too strong and use all the electricity for an electrical breaker. The reason it has more than one power cord, and your current machine has more than one power cord is each cord needs it own breaker.

Question: Please explain what is "Hose Mount?"
This topic is covered under the subject to cover the difference between hose mount, machine mount, exhaust mount vacuum boosters.
https://www.steam-bright.net/forum/parts-and-accessories/vacuum-motors/539-different-types-of-vacuum-boosters-used-in-carpet-cleaning

Question: What is the recommended maximum cleaning distance /vacuum hose length with this machine?
Answer: Unlimited when you use as a booster with another machine (truckmount or portable) and this 7303LX machine is 65 ft from your cleaning wand.
As a stand alone machine 150 ft with 2" ID hose, 75 ft with 1.5" ID hose, these numbers are cut in half when used with a rotary power wand.

Question: If I even want more power, more suction, what are some additional options?
Answer: I could mate this machine with another 7303LX and make my own Quad 6.6 system, OR I could mate with the Mytee Escape dual 6.6 system to make a quad 6.6 machine, OR I could made with the Mytee 1005LX to make a quad 6.6 system, OR I could just purchase a Quad 6.6 machine. Example Goliath Quad 6.6. This is available in both with wheels or trailer/truck mount.

Question: Since this is version 2 what was version 1?
Answer: Version one has a single 6.6 vacuum installed. They doubled the vacuum power with version 2 but the price jumped up another $600 too. Version one is on the discontinued list. If you want a single 6.6 vacuum motor for a hose mount vacuum booster, we will make one for you.

Question: Are the Mytee "hybrid" vacuum motors really stronger than traditional 6.6 vacuum motors?
https://www.steam-bright.net/forum/parts-and-accessories/vacuum-motors/21132-mytee-hybrid-vacuum-motors-really-stronger-than-traditional-6-6-vacuum-motors

Steambrite will ship the Mytee 7303LX II P, (Version 2) Air Hog Vacuum Booster, Dual 6.6 in Vac (Hose Mount), Price Matched [7303LX II P] by either Fedex, UPS, USPS, or Freight Quote, and will normally be shipped within 2-5 business days (if in stock). Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Special order, or custom build items may take up to 30 days.
Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Tuesday 19 November, 2019.