8070 for only $1,311.00 - Steambrite's price on the Auto Detail Machines and Extractors - 8070 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Steam-brite.com Click here for Steam-brite.com's Norton Safe Web Security Report Live chat by BoldChat

  Steam-brite » » Auto Detailing & Car Wash: » Auto Detail Machines and Extractors » 8070 My Account  |  Cart Contents  |  Checkout   

Auto Detailing & Car Wash:
   Air & Water Machines
   Auto Detail Machines and Extractors
   Auto Detail Prep Center
   Auto Detail Wands
   Booms & Accessories
   Car Wash & Auto Detailing Chemicals
   Car Wash Boxes
   Car Wash Supplies: Rotor Arms & More
   Car Wash Vacuums
   Combination Units
   Detail Stations
   Islands & Canopies
   JE ADAMS: Replacement Parts
   Mosmatic Car Wash Accessories
   Turbo Towel - Hot Air Dryers
   Vendor & Towels
   Wash Bay Equipment
Construction Equipment
Equipment: Air Duct Cleaning Machines
Equipment: Carpet Cleaning Machines
Equipment: Hard Surface Cleaning Supplies
Equipment: Restoration
Escalator Cleaning Machines & Equipment
Generators Electrical
Janitorial Supplies Sanitorial
Parts & Accessories
Schools, Training, Books, & Videos
Trailers And Farm
Welding Equipment
Window Cleaning Tools & Equipment
Business Start Up Kits
Used Items
Browse by Manufacturer
About Us
Privacy Notice
Conditions of Use
Contact Us
Shipping & Returns
Reviews Carpet Cleaning Equipment
Write ReviewWrite a review on this product!
French French
Spanish Spanish
German German
Italian Italian
Portuguese Portuguese

Mytee 8070-K Lite IV HEATED Auto Detail Upholstery Carpet Cleaning Extractor 120psi 4gal 3stg Vac hose Wand Includes Freight [8070]

Your Price:  $1,311.00 
Part Number: 8070
Estimated shipping cost: $ 7.00


Mytee 8070-K HEATED Auto Detail Upholstery Carpet Cleaning Extractor

Shazaam SBM230-4 Kryptonium High pH Degreaser - Degrease All Surface Types (Purple) 4 x 1 gal Case  Free SteamBrite gift
 Shazaam SBM230-4 Kryptonium High pH Degreaser - Degrease All Surface Types (Purple) 4 x 1 gal Case 
Please prespray, agitate and then use this machine to rinse it off.
Do not please chemicals in the machine or you can ruin the pump and heater at the same time!
Mytee Lite 4 (4th generation)

mytee 8070 auto extractor hot water extraction machine car cleaning machine upholstery cleaning machine furniture cleaning machine car detail extractor

The NEW MYTEE-LITE™ – When perfection gets a face lift.

Our best selling upholstery machine, The 8070 Mytee-Lite™ has gotten a face lift. If you are looking for an upholstery-spotting machine that can do the job of a full-size extractor, but is small and light enough to hold in one hand! Meet the NEW 8070 Mytee-Lite™ automotive detail extractor, the first in the industry to include an on-board heater for maximum cleaning power. The 8070 Mytee-Lite™ is known industry-wide for its heat, which allows you to quickly break up grease and dirt. At three gallons, it’s perfect for both spotting and small detailing jobs.

The 8070 Mytee-Lite™ Automotive Detail Extractor is known industry-wide for its:

  • Performance. The 1,000-watt in-line heater produces hot water that quickly breaks up grease and dirt. The new Mytee-Lite™ Contains a NEW & IMPROVED single 3-stage HP motor making the extractor even more effective.
  • Convenience and safety. The 8070 Mytee-Lite™ features include an easy twist-off recovery tank lid, NEW easy to install handle with deeper storage basket with hanger for hoses and  cleaning solutions and Mytee’s® optional 3601 System Maintainer™, which reduces pump corrosion and clogging. With a built-in cord wrap, the unit’s 25’ lighted power cord will not be a tripping hazard.
  • NEW – Easily fill solution tank with bucket or “Faucet Fill”.
  • NEW – Recovery tank drain.
  • Tools – 15′ vacuum and solution hose along with the 4″ stainless steel upholstery tool are still included.
  • Versatility. The optional floor wand allows you to also clean small carpeted areas.
  • Durability. The 8070 Mytee-Lite™ is built tough with Mytee’s® roto-molded housing.
  • Transport and storage friendly – Because of its compact size and easy-push handle, the Mytee-Lite™ can be easily transported and stored.
  • Customer Service. Mytee® always offers a limited lifetime warranty and national network of service centers.

For years now, Mytee® has been highly recognized in regard to their detailing extractors within the  automotive industry. You can rest assured that you will be receiving a high quality detailing machine. So don’t wait! Join the thousands of satisfied customers who have made the 8070 Mytee-Lite™ part of their upholstery cleaning and detailing response team.

Water Proof Switches
Waterproof switches add protection against dust and water intrusion.

Locking Casters
Locking casters provide stabilization and prevents any unwanted movement.

Lighted Power Cords
Lighted power cords indicator plug glows when the cord has power.

Cuff-Lynx™ Ready
Cuff-Lynx™ provide an easy connection for vacuum hoses.

This small, compact unit is perfect for those quick spot jobs
and also makes a nice entry-level extractor for homeowners.
Its small design makes it very portable and easy to use.

    Available in 230 volt
MSRP $1099.00
Warranty Limited lifetime warranty
Body Roto-molded polyethylene
Tank 4 gallon
Vacuum Single 3 stage
Mytee C302LA Electro Vacuum Motor Model Q6600-090A-MP-26 3 stage 120V Flat Bottom (C302 original part number)  Factory Installed
 Mytee C302LA Electro Vacuum Motor Model Q6600-090A-MP-26 3 stage 120V Flat Bottom (C302 original part number) 
or similar

CFM 100
H20 130"
Pump Diaphragm
PSI 120
Aquatec 120psi Water Pump 115v 1.3 gpm Mytee C305 For Carpet Cleaning Machines 58-ELK-120  Factory Installed:
 Aquatec 120psi Water Pump 115v 1.3 gpm Mytee C305 For Carpet Cleaning Machines 58-ELK-120 
or similar

GPM 1.3
Heater 1000 W - 210 degree maximum
Mytee A901 1000 watt replacement heater Complete  Factory Installed
 Mytee A901 1000 watt replacement heater Complete 
or similar

Wheels 6"
Locking Casters 2"
Power Cord Single 25' 12/3
Extension Power Cord 12-3 25 feet Heavy duty Mytee E531 10-0860  Factory Provided
 Extension Power Cord 12-3 25 feet Heavy duty Mytee E531 10-0860 
or similar

Mytee 8400P Air Lite Uhpolstery Tool Open Spray Auto Detail Wand with Freight Included  Factory Provided
 Mytee 8400P Air Lite Uhpolstery Tool Open Spray Auto Detail Wand
r similar
Hose Package 15' vacuum and solution hose combo
Product Weight 48 lbs
Shipping Weight 63 lbs
Product Dimensions 10" x 18" x 28 1/2"
Shipping Dimensions 23 1/4" x 15 1/2" x 36 1/2"

 Mytee may make changes in products it manufactures and markets at any time; these changes are made without obligation to change, retrofit, or upgrade any product previously sold or manufactured.


Please note to use the heater will require a dedicated 20 amp 120 volt breaker.  You can use on a 15 amp breaker with the heater turned off.

Mytee Products Warranty Details


Mytee 8070 Question and Answers: mytee 8070 4th generator

Question:  Can I mix my cleaner with the water that I pour into my fresh water tank?
Answer:  NO!  This is not recommended as you should always prespray, agitate the cleaners and then use the machine to rinse off what I have already presprayed and scrubbed.   Most cleaners will ruin the pump and the heater at the same time.

Question:  Since it is a heated machine, can I use cold water?
Answer:  You can but will supply minimal heating results.  Please note this is a super small heater and will only boost the water temperature about 20 degrees F hotter than what you pour into the freshwater tank, so if I add cold 65-degree water, the machine is only going to clean at 85 degrees F.  If I use 120-degree hot tap water, now I can clean at 140 degrees.

Question:  Is this a steam Cleaner?
Answer:  No.  This is a hot water extraction machine as it will not clean with steam.

Question: What is the hottest water temperature that this machine will accept being poured into the fresh tank?
Answer:  140 degree F.

Question:  Factory states up to 120 psi, does it actually clean at 120 psi?
Answer:  No.  This machine is a suction feed machine and not a pressure feed machine.  This means when you squeeze the wand trigger, the pump has to suck the water out of the water tank as well as push it though the heater and out the hose.  If you convert the machine to pressure feed it would provide 120 psi but being that it is suction feed it will be a little under this number.

Question:  Factory states heats water up to 210 degrees, is this true?
Answer:  Yes, when you set the cleaning wand down and quit cleaning the 8 oz heater under the hood will reach 210 degrees and turn itself off.  When you pick up the wand and start cleaning again, the heater will turn itself back on and provide you 8 ounces of really hot water.  But for the average person cleaning and using the machine, expect a 20 degree rise up and above what ever you pour into the machine to start.

Question:  Is this a ‘good’ or ‘professional’ machine?
Answer:  This is the most common question of them all and the answer is both yes and no.  Please note Amp draw is king!  In the world of auto detail machines, we sell them with one power cord, 2 cords, 3, 4, 5 and 6 power cords.  We have systems that burn propane, kerosene, diesel fuel to heat the water.  Systems that use open spray wands, closed spray wands, and internal spray wands.  So out of the 500+ different machines we sell it is near the bottom of the barrel on professional machines drawing 20 amps at 120 volts.  Any machine that uses more power than this will out clean this machine.  This is the laws of physics.  The more energy you place in the vacuum, pump and heating system the faster you can clean.  I had the Hertz Rent-A-Car account for years and you never consider this machine as it is just too slow.  Most professionals would consider a 30 to 40 amp machine for professional cleaning.  The flip side of this is this is the best-selling machine out of all of them because of this price.  It is a lot of machine for the money.   I had a customer stated he wanted to return the machine as he complained it was too slow.  This is like a customer purchasing a bicycle and then complaining if does not drive as fast as an internal combustion engine.  If you want to clean like a 30 amp machine, purchase a 30 amp machine.

Question:  Can I use this machine on a 15 amp breaker?
Answer:  Yes, simply turn the heater off.  The water pump and vacuum will use less than 15 amps.

Question:  How long does it take to heat the 3 gallons of water?
Answer:  It will never heat the 3-gallon tank of water.  The heater is a separate tank under the hood.  The water passes from the fresh tank, to the pump, then to the 8 oz heater, then to the hoses and cleaning tool.  At no time will the hot water go back into the fresh water tank.

Question:  How do not test the heater to make sure it is working?
Answer:  Fill the machine with cold water, turn on the heater, wait 3 minutes and then squeeze the trigger.  Feel the brass quick coupler that leaves the machine, and you will be able to tell the heater works because the coupler will get warm.  This test is only for testing the heater as you are supposed to fill the machine with hot water!  The problem with testing the heater with already hot water is the water is already hot and the machine is only going to make the water hotter, making it harder to know if it is actually working.

Question:  Is the machine freeze / thaw stable?
Answer:  No!  Letting the machine free will ruin the pump and the heater at the same time.

Question:  If I do not like the machine, can I return it?
Answer:  No.  All new machines include a full factory parts warranty but neither the factory nor SteamBrite have a free rental program.  Once you use the machine it is no longer OK to return it.  How would you like us to ship you someone else’s used return when you order a brand new machine?  You would not like this and you expect a brand new machine when you order a brand new machine.  Since these machines are sold almost at cost, offering returns is just not an option.  It is way better to ask questions now and purchase the correct machine for your budget and application up front.

Question:  Does the pump run all the time?
Answer:  No, the pump is on a pressure switch.  When you depress/ squeeze the trigger the pump will turn on, when you let go the pump will turn off.

Question:  If I run out of water, will the pump self prime back up once I start cleaning again?
Answer:  Maybe.  If it does not prime up, water the video on youtube, search “steambrite prime pump.”

Question:  Does the machine include a plastic cleaning wand or a stainless-steel cleaning wand?
Answer:  As of today 2022-04-20, they include a plastic wand.  Please note the factory is super clear that they reserve the right to make changes as they see fit bases on parts availability and warranty issues without notifying the dealers or the public.  All orders filled by part / model number only.  This goes for color too.  They reserve the right to ship you whatever color or shade they want but most orders are filled in the blue family.

Question:  If I have a warranty issue, who is going to fix this machine?
Answer:  You are.  The factory warranty is parts only and does not include shipping or labor cost.   If you have a warranty issue, you will have to remove the broken part and mail it back to the factory for testing.  The factory does not ship out replacement parts until your broken part has been received.  All shipping cost are handled by the customer.   Please note that over 99% of all issues are customer caused by allowing the machine to freeze, allowing the pump to lose it prime, using and storing chemicals in the pump and heater, and clogged spray nozzles and will not be covered by the factory warranty.   I have been selling these machines for over 20 years and currently do not know of a single warranty issue that was not caused by the customer’s neglect.   In other words, if you take care of the machine, it is super reliable.  All warranty issues are handled by email only.  You cannot call on the phone and you will be required to email photos, serial number, invoice number, and explain all the testing you have completed thus far.  Example to say, “it does not work,” the factory is never going to know what part you might need… You will have to participate in the repair process and if you do not think you are OK with this, you should not purchase equipment online at a discount but rather pay full retail price at a retail store.   Some parts are 90-day warranty, some are a year, and the housing is 5 years but pro-rated (like a car battery.)  These machines are super easy to work on and most repairs take under 15 minutes to perform.   There is no reason you should ever have to ship back the entire machine.

Carpet Cleaning Equipment Truckmount Truck Mount Truckmounted Extractor

Steambrite will ship the Mytee 8070-K Lite IV HEATED Auto Detail Upholstery Carpet Cleaning Extractor 120psi 4gal 3stg Vac hose Wand Includes Freight [8070] by either Fedex, UPS, USPS, or Freight Quote, and will normally be shipped within 2-5 business days (if in stock). Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Special order, or custom build items may take up to 30 days.
Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Friday 08 April, 2022.
Product Datasheet Click on the Acrobat Symbol to download this page as a PDF Document

Shopping Cart Carpet Cleaning Equipment
0 items
Manufacturer Info
Mytee Products Inc
Other products
Notifications Carpet Cleaning Equipment
NotificationsNotify me of updates to Mytee 8070-K Lite IV HEATED Auto Detail Upholstery Carpet Cleaning Extractor 120psi 4gal 3stg Vac hose Wand Includes Freight
Specials Carpet Cleaning Equipment
General Pump DCFSCP20 HammerHead 20in Pro Flat Surface Cleaner North Star 49429 Karcher 9.112-950.0
General Pump DCFSCP20 HammerHead 20in Pro Flat Surface Cleaner North Star 49429 Karcher 9.112-950.0
What's New? Carpet Cleaning Equipment
Pumptec 81586 Pump and Motor Assembly 360U - 090 Bearing - M3 Dual Voltage Motor 120v/230v - Misting Pump Set
Pumptec 81586 Pump and Motor Assembly 360U - 090 Bearing - M3 Dual Voltage Motor 120v/230v - Misting Pump Set

carpet cleaning equipment
Click here to Apply Online!


Universal Portable Extractor Overflow Tray

Accepted Credit Cards & Paypal
1982 - 2013 Steambrite Supply
Carpet Cleaning Machines|Truck Mount Machines