20' Orange Jacket Brush Cable System w/7 Brushes
Snap on design - No need for tools
Can be run in forward or reverse without the possibility of spinning off a brush
Button locking stainless steel design for durability and lasting performance
This orange jacket cable has the same inner design as our traditional Sold Core cable systems, but features a more flexible outer jacket.
This design makes it easier to navigate elbows and turns.
- 8", 12" and 18" Silica Carbide Brushes
- 4", 8", 12" and 18" Nylon Brushes
- 1 - replacement Inner Core
#860471 - 20" Replacement Inner Core
#862529 - 20' Orange Jacket Cable w/Button Lock (No Brushes)
Please only use unit with no more than 360 degrees of turns.
Do not turn/use cable with the hose coiled up.
Must use a clutched drill set to the lowest setting that allows the brush to still turn.
If you use a standard drill and/or break the cable it will not be warrantied.
The only way you can brake the cable is to use this with a non clutched drill and/or leave coiled up and or turn it over 320 rpm.
The only way to brake this cable if by operator error.
Do not use faster than 320 rpm. (Usually you can place a zip / cable tie over the trigger to hold the speed - see video. Slide the cable tie off the trigger if you need to stop.)
If you break the cable you can remove the end and cut back the orange jacket and re-install the end.