AR North America 31123, ML320-1/4M Plastic Spray Gun Handle [31123]

Click to enlarge

Your Price: $43.00
Part Number: 31123
Quantity:
Estimated shipping cost: $ 10.00

AR North America ML320-1/4M Plastic Spray Gun Handle 31123

Plastic spray gun that can be used on older Hydro-Force AS08 & AS08R injection sprayers and solvent sprayers AS18 & AS23. Can be used as priming valve on Mytee and Ninja carpet cleaning machines.
Gun MV910 1/4M IN X 1/4F Out 2000psi Factory replaced with ML320-1/4

Specification

Rated for 1850 PSI
180 degrees F
5 gpm
140 bar
80 C
20 lt/min
Made in Italy

Repair parts:
Valve - NA0845

Part Number	30483
Max Pressure (psi)	2000
Inlet Ports	(1) - 1/4" NPT (M)
Discharge Ports	(1) - 1/4" NPT (F)
Weight	0.6

Cross Reference Skus

MV910
1652-2423
200006030
30483
31123
ML320

Steambrite will ship the AR North America 31123, ML320-1/4M Plastic Spray Gun Handle [31123] by either Fedex, UPS, USPS, or Freight Quote, and will normally be shipped within 2-5 business days (if in stock). Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Special order, or custom build items may take up to 30 days.
Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Monday 30 December, 2019.

Product Datasheet

Related Items:

Hydroforce 20140819, Injection sprayer Gun Lance and Jet (20140819)	Hydro-Force AS69A, Tether Only for Sprayer Bottle, 5 Quart AS68A Cap Retainer, No Jug, No Cap - 1670-2627 (AS69A)	HydroForce 1652-2815, AS68L Cap Only for AS68A Injection Sprayer Side, No Gasket No tether No Jug AS08L (1652-2815)
BE Pressure Washer 85.600.125, Frame and Wheels 777897184686 (85.600.125)	HydroForce AS68A, Injection Sprayer 5 Qt Jug, with side Fill Port and Cap, 1605-4278 bottle 147025 (AS68A)	SUBGATURBL, Generic Kaivac Gatling Gun Lance, Bathroom and tile wand (SUBGATURBL)
HydroForce 1691-2584, AS68 Injection Sprayer 5 Qt Jug, with side Fill Port Only, No Cap No Tether 128951 - AS70 (1691-2584)	Hydroforce NA0833, Injection Sprayer 18in Lance Extension, 1667-0895 (NA0833)	B108, Brass Check Valve, 1/4in Mip X 1/4in Mip, 86258780 84144 (B108)
Clean Storm AX23, Solution Tee, QDs for truckmount dual wanding, T or Y Splitter, TWQCF15, Freight included (AX23)	Mytee P535-4 Pack 5-quart Big Mouth Bottle, Hydro-Force AS65, Injection Sprayer Jug 2 Cap Thick Walled Rear Opening 4 Units (P535-4)	Clean Storm XIN56, Solid Cap, 1 5/8in for Injection Sprayer, Hydroforce 1633-2328 (XIN56)

Customers who bought this also bought:

Clean Storm Dual-Reg Adjustable Variable Nozzle Fan to stream Spray 1/4 Fip up to 6 gpm 799119 - 8.712-406.0	Foster FK2BH2B, QD 1/4in Male/Female Set, Brass Quick Disconnect, Compatible With Carpet and Tile Cleaning Machines	Pumptec M9135, Motor Only, (Replaces Discontinued M35, M70, and M35-8), CIM 1/7 HP 120V 30 FRAME 2000 rpm
Hose Wall Buddy Corner Guard 861609 AC18 AC181 CornerG 8.697-425.0 A56578	AH54 Clean Storm Ball Valve 1/4in Male X Female Pipe 1000 psi Chrome Plated Brass AH57 PMV60804 1692-2484	HydroForce NA0820A, Plastic Spray Gun Handle, MV910 (discontinued by factory), Replaced with ML320
HydroForce CR22GL-4 Viper Venom Tile and Grout Cleaner 4 Gallon Case A70618 High pH	BR335, Pressure Washing Quick Connect, 1/4in MALE FLO-THRU Plug X 1/4in, FPT 8.750-695.0 85.300.101	Hydroforce NA0833, Injection Sprayer 18in Lance Extension, 1667-0895
Hydroforce 20140819, Injection sprayer Gun Lance and Jet	Mytee 8400GT Dry GT All Metal Bi-Directional Upholstery And Auto Detail Wand Freight Included	Pumptec NA0845 Valve for MV910 Gun

31123 for only $43.00 - Steambrite's price on the Sprayer Parts - 31123 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

AR North America ML320-1/4M Plastic Spray Gun Handle 31123

Specification

Cross Reference Skus