Ametek-lamb 116565-13 Three Stage Vacuum Motor 5 7 Plastic Horn By-pass - 116565-13

Ametek Lamb 116565-13 Three Stage Vacuum Motor 5.7in Tangential 120 Sandia 10-0810 AV14 8.685-458.0 1920 A64342 [116565-13]

Click to enlarge

Your Price: $125.96
Part Number: 116565-13
Quantity:
Estimated shipping cost: $ 14.00

Product Options
Options:

Ametek Lamb 116565-13 Three Stage Vacuum Motor 5.7" Plastic Horn By-Pass 120 volts

Ametek 116565-13 vacuum motor has three stages and a single speed. Suitable for 120 volt AC operation, 50/60 Hz. Tangential bypass discharge with thermoset fan end bracket and aluminum commutator bracket.

5.7"/145mm 3-Stage Tangential Bypass Discharge - 116565-13

Motor Specs
Fits: Olympus, Hydro-Force FX and EX, Prochem, Mytee, Century, Sandia Plastic, Clean Storm, and many other machines.

Motor Type: Bypass
Discharge: Tangential
Bearings: Double Ball Bearing
Sealed Vacuum: 117.4 inches
Maximum Air Watts: 368
Maximum Air Flow: 99 CFM
Maximum Amp’s: 10.70
Motor Speed: 17,700 RPM

Vacmotor Discharge	Tangential
Vacmotor Size	5.7"
Vacmotor Stages	3
Amps	10.7 Open flow / 8.7 with hose and wand on the floor
Vacmotor Voltage	120V
Cross Reference Skus	AV14 Q6600-054AMP 0297546 116565-13 Tennent 130416 130996 Tornado 19118 Powrflite 19118 30041 408G 44911A 53130 Advance 56209095 Advance 56265096 740089 Prochem 8.685-458.0 86854580 993-1740 A13504 ASM130416 ASM130996 ASM56409 CI-130416-EA VM-25 VV67154 ZD63000A Sandia Plastic 10-0810 Powrflite 1920 19118 X9079 A64342 64342

Basic Model Data

Volts: 120	Discharge: Tangential
Fan Stages: 3	Fan Diameter: 5.7 Inches
Air Seal: Yes	Epoxy Paint: Yes
Double Insulation: No	Bearings: Double Ball
Type: Bypass

General Motor Performance

Rating Watts: 1300	Max Air Watts: 368
Sealed Vacuum: 117.4 Inches	Max Airflow: 99.0 CFM

10.7 amps open flow cfm / 6.7 amps @ sealed zero cfm / 8.7 amps average during use (wand on the floor)

Motor Performance Data Operating at 3/4" -- 19mm Orifice

Vacuum: 56.1 Inches	Airflow: 55.7 CFM
Input Watts: 1212	Input Amps: 10.3
Air Watts: 368	Motor Speed: 17,700 RPM

Factory brochure

2 Motor performance with average consumption of 17.4 amps:
Air Series performance:
199.6 Inches of lift @ Zero CFM
123.75 CFM @ Zero inches of lift
24,700.5 Vacuum units
Parallel performance:
117.4 Inches of lift @ Zero CFM
198 CFM @ Zero inches of lift
23,245.2 Vacuum Units
Will operate 75 ft of 1.5" Vacuum Hose or about 150 ft of 2" vacuum hose.

Shipping charges always apply even when picking up at Steambrite San Antonio, TX

Optional

Press On Vacuum Motor Inlet Tube, Cone, or Horn (suction side) SBMcone15 Esteam 355-405
Click link to watch video!

Add Vacuum Motor Lint Screen Filtration and Gasket to any vacuum motor

Gasket Vacuum Motors fits 5.7in Vacuum Motors 1/4" Thick PP43-807110 Mytee G004A PX13

Steambrite will ship the Ametek Lamb 116565-13 Three Stage Vacuum Motor 5.7in Tangential 120 Sandia 10-0810 AV14 8.685-458.0 1920 A64342 [116565-13] by either Fedex, UPS, USPS, or Freight Quote, and will normally be shipped within 2-5 business days (if in stock). Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Special order, or custom build items may take up to 30 days.
Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Thursday 21 December, 2006.

Product Datasheet

Related Items:

Ametek Lamb R11656513 Carbon Brush for 116565-13 116474-37 116579-00 115923-00 EACH (R11656513)	Ametek Lamb 122628-00 Lamb 6.6 Inch Vacuum Motor Blower 120 volts LX Tangential 1 Stage 1 Speed Mytee C347 (C347)	Max Vac 3 Stage 5.7 Inch Vacuum Motor 10-2450 12023M (12023M)
Add Vacuum Motor Lint Screen Filtration and Gasket to any vacuum motor 20150326 (20150326)	Clean Storm PX13 Vacuum Motor Gasket fits 5.7in Vacuum Motors 1/4in Thick PP43-807110 Mytee G004A PX13 Hydrotek HL031 (PX13)	Gasket for 5.7in Vacuum Motor 1/8in Thick 5.5in OD X 4in ID 035-207-00 (035-207-00)

Customers who bought this also bought:

1/8in Mip X 1/8in Fip Steel Swivel Fitting / Not live 140422	Turbo Force MTH-6 Mini Turbo Spray Bar For Mini-Turbo Hybrid	Pumptec M58 Motor Only Dual Voltage Marathon 1/2 HP 120/230V 5.2/2.6A 50/60Hz 48 FRAME 205 Replaces M4 86364370
Add Vacuum Motor Lint Screen Filtration and Gasket to any vacuum motor 20150326	Pumptec 205V and 207V Triple Repair Pump Head Rebuild Kit 20140922	Aquatec Pumptec Strainer Water Bowl Filter for Carpet Cleaning machine and similar B175 1/2in Barbed X 1/2in Barbed 25-186 H20
Pumptec 80105 112V Pump w/M35 Motor 120 Volt 200psi Mytee C322 is replaced with Part 80005	Clean Storm Sandia and Olympus Vacuum Motor Cooling Vent hose 4 Inches ID 20191119	Pumptec 70015 Plastic 200 psi Pressure Regulator C322A Series 9015
Clean Storm AH42 Vacuum Hose Cuff 1.5in ID Slip X 1.5in Hose Thread - Standard - H300 8.708-903.0 579-005 J00625	Rotovac 12-CBH-LH-I-TF 12 in carpet brush head with teflon glides for 360i machine	Aquatec 120 to 170 psi Pump Diaphragm Pressure Switch Calibrated by User PSW-0100-FAL G11234-1

116565-13 for only $125.96 - Steambrite's price on the Vacuum Motors - 116565-13 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Ametek Lamb 116565-13 Three Stage Vacuum Motor 5.7" Plastic Horn By-Pass 120 volts