Clean Storm 20151203 TurboBrite Air Duct Cleaning Vacuum Driven Basic Package Tool body 6in 8in brushes 1 pair of whips [20151203]

Click to enlarge

Your Price: $736.90
Part Number: 20151203
Quantity:
Estimated shipping cost: $ 14.00

Product Options
Accessories:
Shipping Surcharges:

Clean Storm 20151203 TurboBrite Air Duct Cleaning Vacuum Driven Basic Package Tool body 6in 8in brushes And 1 pair of whips

Description

The Turbobrite is a great entry level air duct cleaning unit for primary round ducts 10" or less. Work by the vacuum turning a turbine inside of the tool that causes the whips to turn. The White centering brush is used to lift the tool body off the bottom of the duct so the whips can spin easier. Can be used with customer provided gas powered truckmounted carpet cleaning machines and all electric carpet cleaning machines with at least 6 stages of vacuum.

Video

Package Includes

Clean Storm ZX Tool TurboBrite Air Duct Cleaning Vacuum Driven Tool Body Only - No whips No case No centering brushes

Clean Storm 1018C TurboBrite Air Duct Replacement Pair of Whips

Clean Storm TurboBrush6 Turbobrite Replacement Circular Centering Brush 6in

Clean Storm 8"BRUSHES Turbobrite Replacement Circular Centering Brush - 08in

Clean Storm 20151203 TurboBrite Air Duct Cleaning Vacuum Driven Basic Package Tool body 6in 8in brushes And 1 pair of whips

Directions

Click here to watch the video!
Turbobrite vacuum driven cleaning procedures (the vacuum turns the blue whips):

Carry 7 ft ladder (easy to move around in 8 ft ceilings) and 10 ladder (will fit inside the standard extended wheel base van) in truck as needed.
Take care of any paper work with customer.
Prep area as needed. (Move furniture to access vents, then cover nearby furniture with plastic to protect it.)
Turn off power to ventilation system.
After you perform your pre-inspection of the system both in the ducts and in the attic, put on your safety goggles and dust mask.
Remove vent covers and place in soapy cleaner in a plastic/rubber tub.
Scrub vents with upholstery brush and rinse off.
Leave vent covers on driveway to dry.
Carry a couple of cans of spray paint (in different colors) as an 'add on' to repaint vents after cleaning and before installation.
Install dust downer 50 ft from truckmount. This sprays water in the vacuum hose so your truckmount can deal with the mud and not dust. Vacuum ventilation system intake area with duster brush attachment. Replace and clean ventilation filter. (great add on to sell filters)
Place magnet on unit to remind your customer who to call. Place plain sticker and label with date of cleaning and estimated return appointment.
Use a 25 ft 1-1/2" vacuum hose leader. This is what is going to be fed into the duct.
Unscrew the hose cuff off the end of the vacuum hose. The Turbobrite tool screws into the threads on the inside of that vacuum hose leader. It is a real snug fit to insure if will not come off inside of the duct.
Attach the appropriate centering brush on the Turbobrite tool. All sizes are available from 4" to 10" in diameter.
Attach two whips that are long enough to lightly agitate duct. Whips are 9" long and can be trimmed to fit smaller ducts. The whips wear down and get smaller so save the whips as they wear down for the smaller ducts. Replacement whips are available.
Change out dust mask for respirator.
Feed Turbobrite down duct at a rate of 1" per second as far as you can and then pull the tool back out at 1" per second.
Clean carpet (if needed)
Fog with EPA approved duct sanitizer (if needed or paid for. 5 min. per duct @ 1.5 revolution on ULV fogger) Make sure customer does not breath atomized chemical.
Replace vent covers.
SHIPPING WEIGHT = 5#S
SHIPPING DIMENSIONS: 12 x 12 x 5

Turbobrite Directions

Compatible with the following machines (short list) Goliath Extractor, Mytee 1005DX, Mytee 1003DX, Mega 3, Sandia 80-3500, Sandia 80-350H, All Galaxy dual 3 stage machines, all triple two stage machines, all gas powered carpet cleaning machines, Ninja dual 3 stage, Diamondback dual 3 stage,...many more.

Compare to current or past OEM associations:

1616-7975
DC330

Maintain tool with

CRC Heavy Duty Silicone Spray 11oz Can (For TurboBrite Plastic Disk)

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Clean Storm 20151203 TurboBrite Air Duct Cleaning Vacuum Driven Basic Package Tool body 6in 8in brushes 1 pair of whips [20151203]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

Current Reviews: 1

This product was added to our store on Monday 29 November, 2004.

Product Datasheet

Related Items:

Clean Storm 20181106, 25 ft Vent Cleaning Air Hose System for Skipper Balls/Air Whips, Reverse Blast (w/ Squeeze Trigger) (20181106)	Air Duct Cleaning Equipment Repair San Antonio TX (Repair Air Duct Cleaner)	Clean Storm 20151204, Vacu-Whip Air Duct Cleaning Start Up Kit, for Carpet Cleaners (20151204)
Clean Storm 20181105, Complete Tile, Carpet, Pressure Washing, Flood Extraction, Air Duct, Start Up Business Package (20181105)	Clean Storm 20240517 TurboBrite XL Vacuum Drive Air Duct Cleaner 16 Inch Centering Support Ring (20240517)	Clean Storm 20240930 TurboBrite XL Air Duct Cleaning Vacuum Drive 12 14 and 16Inch Centering Brushes Whips 2Inch Vacuum (20240930)
Clean Storm TurboBrite Air Duct Cleaning Silver Package Vacuum Driven Tool body Center Brushes 3 pair whips case 20220225 (20220225)	Sporicidin 100797256030058, RE-1284F, Disinfectant Solution Phenolic based intermediate cleaner, 1 Gallon, 861350, 57643 (100797256030058)	Clean Storm 20151118, Vacu-Whip Air Duct Cleaning Attachment, 33 ft Complete Starter Kit (20151118)
HydroForce AC040, Air Wave Duct Cleaning System, Freight Included, 1682-2987, And Dryer Vent cleaning (AC040)	Clean Storm 8"BRUSHES Turbobrite Replacement Circular Centering Brush - 08in (8"BRUSHES)	Clean Storm CE1958, Cable Drive Vac Hose 1.5 X 33 ft, With 12 inch Button Brush, for Air Duct Cleaning (CE1958)

Customers who bought this also bought:

Turboforce TH260 Replacement Hard Boot Ring 12 Inches for TH40 Hybrid Wand VersaTile 67-054 [TH-260]	PMF AW51A, 4.5 in Upholstery Cleaning Tool, w/ Internal Spray Jet Wand, 500 psi Brass Valve, MasterBlend 440100	PMF H58, Wand Filter, for Carpet and Upholstery Cleaning Machines and Tools, 1/4 Mip x 1/4 Fip Connections
AH204 Flash Cuff 2" Female X Thread on 2" Vac Hose 1601-1227 112021	FGI Smith AS40, ULV Water Based Cold Fogger Mister, 115V K9-2600, 190444 ,190695W, GTIN 841688006829	Clean Storm Solution Carpet and Tile Cleaning Hose 100 ft x 1/4in ID 3000 psi Single Wire Braid Non Marking Jacket 20130904
Foster NA0801 Male Brass Quick Disconnect, QD 1/4in fip X 1/4in, B101 - PX5 - B001 - QD40	Hydroforce AH206 Flash Cuff 2.0in Male Cuff 1606-1323 112036	Clean Storm AH78B, Solution Carpet Tile Cleaning Hose, 50ftX1/4inID 3000Psi Non Marking Jacket, GTIN 019962143601
Foster NA0701, Female Brass Quick Disconnect, QD 1/4in Fip X 1/4in, B003 8.697-350.0 B703476 Hydramaster 000-052-051	Cuff AH41 Standard Vacuum Hose Swivel Cuff 1-1/2 in Thread x 1-1/2 in Slip 87089050 579-010 1653-0370 PV10008	Nikro 520111 - Crevice Tool 1.25in x 9in