2359B-P for only $412.15 - Steambrite's price on the Hypro Pumps - 2359B-P extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Steam-brite.com Click here for Steam-brite.com's Norton Safe Web Security Report Live chat by BoldChat
 

  Steam-brite » » Parts & Accessories » Pumps (Water Pumps) » Hypro Pumps » 2359B-P My Account  |  Cart Contents  |  Checkout   

Store
Auto Detailing & Car Wash:
Chemicals
Equipment: Air Duct Cleaning Machines
Equipment: Carpet Cleaning Machines
Equipment: Hard Surface Cleaning Supplies
Equipment: Restoration
Escalator Cleaning Machines & Equipment
Generators Electrical
Janitorial / Sanitorial
Miscellaneous
Parts & Accessories
   Bags, Belts & Magnets
   Blowers
   Bottles
   Brass, Plastic, Steel, And Stainless Fittings
   Brushes, Bonnets, Pad Drivers, & Clutches
   Buckets
   Carpet Installation And Repair Tools
   Containment & Barrier Products
   Electrical Adapter Temporary Power Boxes
   Electrical Components
   Engines
   Extension Cords
   Filters
   Fuel Kits
   Gauges
   Glides
   Heaters
   Hose Cuffs & Connectors
   Hose Reels
   Hoses
   Jets Nozzle TeeJet VeeJet
   Karcher Repair Parts
   Meters and Lights
   Miscellaneous Repair Parts
   Ozone Cleaning Kits
   Pumps (Water Pumps)
     Annovi Reverberi Pumps
     Aquatec
     Arimitsu
     BE Pressure Pump
     Cat Pumps
     Clean Storm
     Comet Industrial Pumps
     Davey
     Flojet Pump
     General Pump
     Hotsy Pumps
     Hypro Pumps
     IPT-gorman-rupp
     Legacy Pumps
     NorthStar
     Pacer
     Powerhorse
     Prochem
     Pumptec
     Rug Doctor Pumps
     Sapphire Scientific
     Shertech Pumps
     Shurflo Water Pumps
     Thermastor
     Yamada Pumps
     Zoeller Pump
   Quick Disconnects And Couplers
   Regulators & Unloaders
   Reverse Osmosis Water Treatment
   Sprayer
   Sprayer Parts
   Steel Wool
   Switches
   Swivels Pressure Rotary Union
   Tanks
   Trigger Sprayers
   US Products Treadmaster Accessories
   Vacuum Boosters
   Vacuum Motors
   Valves
   Van Accessories/Holders
   Wheels and Casters
   White Magic Parts
Trailers, Farm, & Construction Equipment
Training Books & Videos
Welding Equipment
Window Cleaning Tools & Equipment
Business Start Up Kits
Used Items
Browse by Manufacturer
Steambrite
About Us
Privacy Notice
Conditions of Use
Contact Us
Sitemap
Shipping & Returns
Reviews Carpet Cleaning Equipment
Write ReviewWrite a review on this product!
Translate
English
French French
Spanish Spanish
German German
Italian Italian
Portuguese Portuguese

Hypro 2359B-P Pump TriPlex Plunger 3.5 gpm 3000psi 1725 rpm [2359B-P]


Your Price:  $412.15 
Part Number: 2359B-P
Quantity:
Estimated shipping cost: $ 32.00




Reviews


Hypro 2359B-P PowerLine Plus Triplex Plunger Pumps with Solid Shafts have forged brass heads, they come with rail mounting kits, 3/4" OD solid shaft, 1/2" inlet port and 3/8" outlet port. 
* The Hypro 2359B Pump has a M6X1 threaded shaft for clutch installation, Clutch extra

2359B-P *

3.5

3000

1725

These PowerLine Plus, triplex plunger pumps, achieve up to 4.8 gpm (18.2 lpm) and 3000 psi (207 bar). This series includes base models 2314B-P, 2330B-P, 2340B-P, 2345B-P, 2351B-P and 2359B-P.
Used in many different types of pressure washers and carpet cleaning machines like the Dragon
PowerLine Plus 2300 Series

Self-serve carwash and tunnel prep unit owners across the country are making the switch to Hypro’s 2300 Series plunger pumps. Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.

Take a closer look at the features of the Powerline Series plunger pumps and see for yourself why Hypro is the best plunger pump manufacturer in the carwash industry.
 

  • Performance Information
  • • Max. flow: 3.1 gpm/11.7 lpm (2330B-P); 3.5 gpm/13.2 lpm (2359B-P); 4.0 gpm/15.1 lpm (2314B-P and 2351B-P); 4.2 gpm/15.9 lpm (2340B-P); 4.8 gpm/18.2 lpm (2345B-P)
  • • Max. pressure: 1200 psi/83 bar (2314B-P); 2500 psi/172 bar (2330B-P, 2340B-P and 2345B-P)
  • • Max. rated speed: 1450 rpm(2314B-P); 1725 rpm (2330B-P, 2340B-P, 2345B-P, 2351B-P and 2359B-P)
  • • Max. fluid temperature: 160°F/71°C
  • Other Attributes
  • • Port sizes: 1/2" inlet, 3/8" outlet
  • • Shaft: 3/4" OD solid
  • • Head material: Single-piece forged brass heads backed by lifetime warranty
  • • Plunger rods: Hardened stainless steel lower-plungers – superior corrosion and wear resistance
  • • Plunger rod guides: ZA27 piston guides give you larger bearing surface for extended life on oil seals and plungers
  • • Valves: Precision-machined, stainless steel valve and seats provide higher resistance to chemical attack
  • • Ball bearings: Longer lasting drive system with heavy duty ball bearings
  • • Plungers: 100% ceramic plungers
  • • Seals: Heavy-duty oil seals
  • • Bases: Standard - C3 retrofit bases match Cat 310 and 5CP base footprints
  • • Servicing: Hypro's state-of-the-art, patented cartridge technology allows easy servicing of crankcase oil and all wet-end seals - remove only the pump head
  • • Weight: 19 lbs./8.6 kg
  •  
     
     More information (may not fit on web page)
    PowerLine Plus 2000 plunger pumps are designed for
    pumping water, soap, detergent, and other
    nonflammable liquids that are compatible with pump
    component materials. The maximum liquid temperature
    is 160° F for the PowerLine Plus 2200B-P, 2300B-P and
    2400B-P model pumps.
    Construction features include an oil-bath crankcase, a
    forged brass head, polished ceramic plungers and
    stainless steel unitized valves, (high-temperature,
    preloaded cup seals). Car wash pumps include high
    performance, low pressure seals for superior reliability in
    high vacuum applications. Heavy-duty, high pressure
    seals and back-up washers are included in all car wash
    pumps to guard against corrosion and continuous duty
    fatigue.
    The 2200B-P and 2300B-P series have sturdy
    connecting rods/floating wrist pins (patent-pending). The
    crankshafts on all models are made of forged steel that
    is supported by extra heavy-duty bearings. The shaft
    rotation is in either direction.
    Special corrosion-resistant cartridges are included
    specifically for car wash applications. Hypro’s userfriendly
    oil-seal replacement cartridge technology on the
    2200A-P, 2200B-P, 2300B-P, 2350B-P, 2400B-P and
    2430B-P models minimizes downtime.
    POWERLINE PLUS
    2200B-P and 2200A-P
    DUPLEX PLUNGER PUMP
    Flow Rate: 2.1 to 3.0 gpm
    Max. Pressure:
    2000 psi (1725 rpm)
    1500 psi (3450 rpm)
    1000 psi (aluminum head)
    RPM: 1725 & 3450 rpm
    Ports: 1/2" inlet
    3/8" outlet
    Shaft: 3/4" dia. (solid)
    5/8" dia. (hollow)
    3/4" dia. (hollow)
    This manual covers the installation of the basic drive
    configurations available for Hypro’s PowerLine Plus 2000
    plunger pumps. Adapter kits, flange kits, and gearbox
    kits are covered in the installation instructions packed
    with the kit. Consult the recommendations of the
    manufacturer of your motor or engine for additional
    information. Read all safety information before
    attempting to install or operate the pump.
    Installation, Operation, Repair and Parts Manual
    2000 PLUNGER PUMPS Form L-0500PL
    8/08
    Description
    Drive Source Installation
    Flow Rate: 3.1 to 4.8 gpm
    Max. Pressure:
    2500 psi (2300)
    3000 psi (2350)
    RPM: 1725 rpm
    Ports: 1/2" inlet
    3/8" outlet
    Shaft: 3/4" dia. (solid)
    3/4” dia. (hollow)
    Flow Rate: 3.1 to 4.2 gpm
    Max. Pressure:
    1200 psi
    RPM:1725 rpm
    (2303B-P & 2304B-P)
    1450/1100
    (2314B-P)
    Ports: 1/2" inlet
    3/8" outlet
    Shaft: 3/4" dia. (solid)
    Flow Rate: 4.3 to 7.9 gpm
    Max. Pressure:
    2500 psi (2400)
    3600 psi (2430)
    RPM: 1725 rpm
    Ports: 3/4" inlet
    1/2" outlet
    Shaft: 1" dia. (solid)
    POWERLINE PLUS
    2300B-P and 2350B-P
    TRIPLEX PLUNGER PUMP
    POWERLINE PLUS
    2303B-P, 2304B-P & 2314B-P
    TRIPLEX PLUNGER PUMP
    POWERLINE PLUS
    2400B-P and 2430B-P
    TRIPLEX PLUNGER PUMP
    -2-
    1. WARNING: Use a pressure relief device on the
    discharge side of the pump to prevent damage
    from pressure buildup when the pump discharge
    is blocked or otherwise closed and the power
    source is still running. For trigger gun operation,
    or where discharge is frequently shut off,
    pressure unloader valves are recommended.
    FAILURE TO FOLLOW THIS WARNING CAN
    RESULT IN PERSONAL INJURY AND/OR
    PROPERTY DAMAGE AND WILL VOID THE
    PRODUCT WARRANTY.
    2. WARNING: Do not pump flammable or explosive
    fluids such as gasoline, fuel oil, kerosene, etc.
    Do not use in explosive atmospheres. The pump
    should be used only with liquids that are
    compatible with the pump component materials.
    Failure to follow this warning can result in
    personal injury and/or property damage and will
    void the product warranty.
    3. Do not run the pump faster than maximum
    recommended speed.
    4. Do not pump at pressures higher than the maximum
    recommended pressure.
    5. The maximum liquid temperature is 160°F for
    PowerLine Plus 2200B-P, 2300B-P and 2400B-P
    models.
    6. Make certain that the power source conforms to the
    requirements of your equipment.
    7. Provide adequate protection in guarding around the
    moving parts such as the shaft and pulleys.
    8. Disconnect the power before servicing.
    9. Release all pressure within the system before
    servicing any component.
    10. Drain all liquids from the system before servicing any
    component.
    11. Secure the discharge lines before starting the pump.
    An unsecured line may whip, causing personal injury
    and/or property damage.
    12. Check the hose for weak or worn condition before
    each use. Make certain that all connections are tight
    and secure.
    13. Periodically inspect the pump and the system
    components. Perform routine maintenance as
    required. (See Maintenance section.)
    WARNING: RISK OF ELECTRIC SHOCK!
    To reduce the risk of electric shock, adequately ground
    the electric motor to a grounded metal raceway system,
    or use a separate grounding wire that is connected to
    bare metal on the motor frame or to the grounding screw
    located inside motor terminal box; or ground by other
    suitable means. Refer to the most recent National
    Electric Code (NEC) Article 250 (Grounding) for
    additional information. ALL WIRING SHOULD BE
    PERFORMED BY A QUALIFIED ELECTRICIAN.
    WARNING: Do not handle a pump or pump motor
    with wet hands or when standing on a wet/damp
    surface or in water.
    14. Do not operate a gasoline engine in an enclosed
    area. Be sure the area is well ventilated.
    WARNING: Gasoline is a highly combustible fuel.
    The improper use, handling, or storage of gasoline
    can be dangerous. Never touch or fill a hot engine.
    15. Use only pipe, hose and fittings rated for the
    maximum psi rating of the pump. If an unloader is
    used, then the pipe should be rated for pressure at
    which the unloader operates.
    16. Do not use these pumps for pumping water or other
    liquids for human or animal consumption.
    General Safety Information
    Direct Drive - Flexible Coupling Installation
    To order the correct shaft couplers for your pump model,
    refer to Hypro Price List 1000.
    1. Insert the keys onto the shafts and slide the coupler
    ends onto the pump and motor shafts flush with the
    shaft end.
    2. Mount the motor and pump onto the bases —
    shimming the pump or motor so that the shafts are
    aligned. Make sure the shafts are aligned parallel.
    Leave enough space between the ends of the shaft
    to allow the coupler center disk to be inserted.
    3. When the alignment is made, slide the coupler ends
    together over the coupler center disc.
    4. Securely tighten the set screws in both coupler ends.
    CAUTION: For safety, install a shield over rotating
    shafts and couplers.
    Center Disc
    Coupler End
    -3-
    Belt/Pulley Drive Installation
    Direct Drive - Hollow Shaft and Integral C-Flange Installation
    Belt and pulley drive systems are typically used to
    reduce pump speed. Pumps may be rotated in either
    direction allowing either clockwise (CW) or counterclockwise
    (CCW) operation of the motor or engine.
    For determining proper pulley sizes, use the formula
    below as a guideline and use “A” or “B” section belts.
    MOTOR RPM = FLOW (@RATED SPEED) = PUMP PULLEY DIA.
    PUMP RPM FLOW (DESIRED) MOTOR PULLEY DIA.
    EXAMPLE: Use a 1725 rpm electric motor to drive a
    pump at 950 rpm.
    Typically, a pulley diameter on the motor is 3.4 inches.
    The pump pulley diameter can be determined from the
    formula above:
    1725 = PUMP PULLEY DIAMETER
    950 3.4 INCHES
    1725 x 3.4 INCHES = 6.2 INCHES
    950
    1. Install the pulley or bushing/sheave combination
    (See Figure 1) onto the pump and motor shaft.
    Mount the pump next to the motor making sure the
    pulleys are lined up properly. Use a straightedge as
    shown in Figure 2. Rotate to check for run-out and
    bent shafts.
    2. Install belt(s) and use slots in the pump mounting
    rails to tighten the belts. Make sure the belts have
    proper tension. Belts that are too tight will cause
    bearing wear, and belts that are too loose will cause
    slipping. (See Figure 3.)
    L
    d
    1
    2
    3
    Straightedge touching sheaves at four
    points indicates alignment.
    Push the belt
    midway between
    the pulleys, check
    the deflection (d)
    and adjust:
    d = 0.016 x L
    1. Position and mount the motor onto the base.
    2. For hollow shaft models, install rubber grommets
    into the pump base, and install the pump base onto
    the pump securing with two 5/16" x 1/2" bolts.
    3. Insert the key into the motor shaft keyway. Apply
    Never-Seize to the shaft and key.
    4. Slide the pump onto the motor shaft. DO NOT
    FORCE; this prevents binding.
    5. For integral C-flange models, line up the holes in the
    flange with the holes in the motor face and secure
    with four 3/8" x 7/8" hex head bolts.
    6. Install set screws into the pump shaft and tighten
    securely.
    Note: For hollow shaft models, the pump should not be
    mounted rigidly but should rest on the rubber grommets
    in the base to prevent rotation of the pump.
    -4-
    System Installation
    Operation
    1. In general, select an adequate size drive unit to avoid
    overloading. Avoid unnecessary restrictions in the line
    such as elbows, check valves, and all extraneous
    curves and bends.
    2. Avoid using a looped section which might permit air to
    become trapped.
    3. Use pipe joint sealant on the pipe threads to assure
    airtight connections.
    4. Selection of the right type and size of hose is vital
    to good performance. Be sure to hook the lines to
    the proper ports on the pump.
    5. Always use genuine suction hose of at least the same
    diameter as the inlet port of the pump. If the suction
    (inlet) hose is more than four feet long, use the next
    larger size.
    6. A strainer should be installed in the suction line (80 to
    100 mesh is recommended). Clean the strainer as soon
    as it becomes clogged.
    7. Use one or two braid reinforced hose to prevent
    collapse of suction line.
    8. Use only approved, high-pressure hose on the
    discharge side, and make sure all connections are tight.
    NOTE: Use only pipe, fittings, accessories, hose, etc. rated
    for the maximum pressure rating of the pump.
    Pump
    1. Before installing the pump, clean all fittings and hoses.
    2. Rotate the pump by hand to make sure it turns freely.
    3. Make sure that all hose connections are tight and use
    the proper size fittings that are capable of safe
    operation.
    CAUTION: Replace the oil plug with the dipstick before
    operating the pump.
    IMPORTANT: Hypro PowerLine Plus pumps are filled
    with Hypro Oil. Hypro recommends changing oil after
    40 hours of break-in operation and every three months
    or 500 hours, whichever comes first. Use Hypro Oil (P/N
    2160-0038). Refer to the recommended lubrication
    marked on the crankcase of the pump.
    Discharge Side Installation
    From the pump to the discharge hose, the following
    accessories are recommended: a dampened pressure
    gauge with a face pressure double the maximum
    operating pressure, an unloader valve, a pulsation
    damper, an optional pressure gauge to monitor unloader,
    and discharge hose.
    Accessories such as an unloader valve, a pressure
    gauge, a pulsation dampener - should be installed as
    close to the pump as possible. A hose must be used
    right after the accessories. If solid piping is used, a two
    to four foot section of hose must be installed between
    the accessories and the piping.
    Inlet Side Installation
    From the source of liquid to the pump, the following
    components are recommended: a shut-off valve, a
    bypass return tee from the unloader, a line strainer, and
    a compound pressure gauge.
    Inlet Water Supply
    Inlet Filter: Should be an 80-mesh screen.
    Hose: Pressure feed, 3/4" I.D. garden hose.
    Feed Requirement: 5 gpm — open.
    A garden hose should supply 10 gpm minimum (twice
    the pump requirement).
    WARNING: Aluminum and bronze are the materials
    available for pump heads. Aluminum is recommended for
    solutions with a pH range of 5.5 - 8. Bronze is best for
    concentrated soap solutions. DO NOT pump flammable or
    explosive liquids such as gasoline, kerosene, etc. DO
    NOT pump corrosive or abrasive liquids because these
    will cause rapid wear or deterioration of plungers, valves
    and seals in the pump. The pump should be used only
    with liquids compatible with pump component materials.
    Do not exceed the maximum specified rpm and pressure.
    Observe the lubrication instructions. Failure to follow this
    warning will void the product warranty.
    Lubrication
    Before running the pump, check the oil level using the
    dipstick. Use Hypro Oil (P/N 2160-0038) or SAE 30 weight
    non-detergent. Refer to the recommended lubrication marked
    on the crankcase of the pump.
    The crankcase capacity is as follows:
    PowerLine Plus 2200B-P pumps . . . . . . . . . . . . . . . 8 fl. oz.;
    PowerLine Plus 2300B-P/2350B-P pumps . . . . . . . 14 fl. oz;
    PowerLine Plus 2400B-P/2430B-P pumps . . . . . . . 26 fl. oz.
    Change oil every 500 hours of operation.
    Priming the Pump
    To prime the pump, adjust the unloader valve to its lowest
    pressure setting. After starting the pump, open and close the
    gun to aid priming and to clear the valves of air. If the pump
    does not prime within a few seconds, stop the motor and
    inspect the installation for suction line leaks and obstructions.
    In general, keep suction lift to a minimum and avoid
    unnecessary bends in the suction line. The unloader valve
    must be readjusted after the prime has been obtained.
    Care of the Pump
    Generally, after each use, flush the pump with a neutralizing
    solution for the liquid pumped. Follow with a clear water rinse.
    For storage under freezing conditions, flush the pump with a
    50% mixture of automotive antifreeze and water.
    Spray Gun
    Pulsation
    Dampener
    Unloader
    Valve
    Dampened
    Pressure Gauge
    Pump
    Line Strainer
    Bypass back
    to the inlet or
    resevoir
    -5-
    Repair Instructions
    Plunger Seal Repair
    Models 2200B-P, 2300B-P and 2350B-P
    Tools Required
    • 3/16" Allen Wrench
    • External Pliers (P/N 3010-0057)
    1. Replace the plunger seals if there is water leakage
    from the weephole (Figure 1).
    2. Use a 3/16" Allen wrench to remove the cylinder
    head bolts. Remove the head from the crankcase
    assembly (Figure 2).
    3. After removing the head, rotate the shaft and remove
    the cup retainers from the plungers (Figure 3).
    4. Remove the cup retainer and the cup from the
    cylinder head. If they can’t be removed by hand, use
    an external pliers (Figure 4).
    5. Replace the plunger seal kits. Refer to the parts lists
    for the proper kit for your pump model.
    6. Install the parts as follows:
    a. With the groove facing down into the cylinder
    head, install the high pressure cup (Figure 6,
    Ref. A).
    b. Install the Teflon support ring over the cup (Ref. B).
    c. Install the plunger seal kits into the head as
    shown in Ref. C.
    7. Turn the crankshaft so the plungers are even. With the
    outlet valve plugs up, install the cylinder head onto the
    crankcase body (Figure 7).
    8. The capscrews should be torqued at 105-115 in. lbs.
    If a torque wrench is not available, tighten the
    capscrews down, but do not over tighten. Use a
    rotating procedure as shown (Figure 8). Remember
    to include the lock washers under the capscrews.
    Valve Assembly Replacement - ALL Models
    1. Remove the valve cap (Figure 9, Ref. 1).
    2. With a needle nose pliers, remove the valve
    assembly (Ref. 3) from the head.
    3. Remove the o-ring (Ref. 4) from below the valve
    assembly.
    4. Remove the o-ring (Ref. 2) from the valve cap.
    5. To reassemble, reverse the above steps.
    6. Torque specifications on the valve cap:
    60 ft. lbs. on the 2200B-P and 2300B-P series.
    1
    3
    5
    7
    9
    2
    4
    6
    8
    -6-
    Packing Replacement
    Models 2400B-P and 2430B-P
    1. With a 1/4" Allen wrench, remove six head bolts.
    Turn the shaft to push the head from the crankcase
    assembly, then pull the head off the plungers.
    2. Remove the cup retainer assembly from the cylinder
    head. These can usually be removed with a finger. If
    they cannot be removed by hand, use an external
    pliers to remove the assemblies from the head
    (Figure 1). (It may be helpful to place a screwdriver
    between the pliers jaws.)
    Next, remove the Teflon backup ring and the high
    pressure cup from the head.
    3. Remove the low pressure seal from the cup retainer
    with a small flat-blade screwdriver. The o-ring around
    the outside of the cup retainer can also be removed
    with a small screwdriver or knife.
    4. Remove the vacuum rings by rotating the crankshaft.
    Remove the retainers from the oil seal retainer.
    5. If you are replacing oil seals at this time, see the oil
    seal replacement section.
    6. The parts to be replaced consist of three high
    pressure cups, three backup rings, three low
    pressure cups, three vacuum seal rings and six
    o-rings found in the seal repair kit. Refer to the parts
    list for the proper parts kit. The parts shown in Figure
    2 are as follows:
    (a) high pressure cup, (b) backup ring, (c) brass cup
    retainer, (d) low pressure cup, (e) low pressure cup
    retainer, (f) vacuum seal ring, (g) vacuum o-ring, (h)
    o-ring, vacuum seal retainer, (i) vacuum seal retainer.
    7. Install the parts into the head as follows:
    (Figures 2 and 3)
    7.1 Install the high pressure cup with the groove
    facing down into the cylinder head.
    7.2 Install the backup ring over the high pressure
    cup.
    7.3 Install the brass cup retainer with the narrow end
    facing down into the cylinder head.
    7.4 Install the low pressure cup into the cup retainer.
    7.5 Install the low pressure cup retainer into
    the head.
    7.6 Press the vacuum seal ring into the o-ring.
    With the two parts together, push them into the
    vacuum seal retainer.
    7.7 Place the o-ring (h) over vacuum seal retainer.
    7.8 Install the vacuum seal with the retainer and
    retainer ring, over the plunger and into the oil
    seal retainer.
    8. Install the cylinder head onto the plungers with the
    outlet ports on top. Secure to the crankcase with the
    head bolts torqued to 170 inch lbs. (Figure 4).
    9. Turn the pump shaft to make sure there is no
    binding.
    c
    a
    b
    d
    e
    f
    g
    i
    h
    1
    2
    3
    4
    -7-
    Oil Seal Replacement
    2200B-P and 2300B-P Series
    Tools Required
    • Oil seal insertion tool P/N 3010-0248
    (Models 2200B-P thru 2350B-P)
    • 9/16" hex wrench
    • 3/16" flat screwdrivers
    1. Drain the oil from the crankcase using a 9/16" hex
    wrench (Figure 1).
    2. Remove the cylinder head, then remove the plunger
    retaining nuts with a 9/16" hex wrench. Remove the
    plungers and slinger rings (Figure 2).
    3. Inspect the plunger rods for nicks or scratches. Turn
    the crankshaft, and at the same time, note the
    condition of the rods (Figure 3). Replace the rods if
    nicks or scratches are present. The oil seal will not
    work if the plunger rods are damaged. (Remove the
    back cover to replace plunger rods). CAUTION: The
    needle bearings have loose needles. Repack the
    needles with grease to hold in place if the shaft is
    removed.
    4. Lift out the plunger guide using two flat screwdrivers.
    Be careful not to damage the plunger rods (Figure 4).
    5. Replace the plunger guides with oil seals and o-rings
    by indexing to the vent ports as shown (Figure 5).
    Refer to the parts list for the proper oil seal repair kit
    for your model of pump.
    6. Reinstall the slinger rings and ceramic plungers
    (Figure 6); torque the retaining nut to 105-115 in. lbs.
    Use Locktite 242 on all plungers and nuts. Reinstall
    the cylinder head. Check to see that the crankshaft
    turns freely.
    7. Install the oil plug. Fill the crankcase to the correct oil
    level on the dipstick. Refer to the recommended
    lubrication marked on the crankcase of the pump.
    Use 8 oz. for 2200 models; 14 oz. for 2300 models.
    Oil Seal Replacement
    Series 2400B-P and 2430B-P
    1. See the packing replacement instructions for head
    removal.
    2. Remove the plunger nut, plunger and slinger ring.
    3. Lift the oil seal retainer cartridge from the crankcase.
    A 90°Allen wrench or bent bar may be used to pry
    the retainer out. The slot under each plunger may be
    used to access the cartridge (Figure 8).
    4. Push the old oil seal out and remove the o-ring from
    the outside of the cartridge.
    5. Install the new oil seal into the cartridge placing the
    flat surface in first. Replace the o-ring on the outside
    of the cartridge. Lightly oil the o-ring and cartridge to
    prevent damage during installation.
    6. Push the retainer containing the o-ring and oil seal
    into the crankcase. Align the holes in the cartridge
    with the slots in the crankcase.
    7. Replace the plunger as described in the plunger
    replacement section. Replace the head as described
    in Step 8 of the packing replacement section.
    1 2
    4
    6
    8
    3
    5
    7
    -8-
    Plunger Replacement
    1. Remove the pump head from the crankcase as
    described earlier in the packing replacement section.
    2. Remove the plunger retaining nut and carefully slide
    the plunger off of the lower plunger. Remove the oring
    from the lower plunger. Remove the plunger
    retaining nut and slinger ring.
    3. Inspect the plungers for cracking or damage, and
    replace if damaged. Always replace the slinger ring
    when a ceramic plunger is removed. This avoids
    fracturing the plunger when torquing the plunger
    retaining nut. Use Locktite 242 on the plunger nut.
    See the parts list for proper plunger kits.
    4. Install new parts as follows:
    a. Install the slinger ring onto lower plunger.
    b. Lightly oil the lower plunger rod and install the
    o-ring backup seal into place.
    c. Slide the plunger onto the lower plunger placing
    the end of the plunger containing the black ring
    towards the crankcase.
    d. Install the plunger retaining nut washer and
    retaining nut onto the lower plunger. Torque the
    plunger nut with Locktite 271 to 100-115 in. lbs.
    for all models.
    5. Install the new plunger packings as described in the
    packing replacement section.
    Model 8000-0015 and 8000-0021 Gearbox Kits Installation
    Unloader Valve Safety Information
    See the gearbox illustration and parts
    breakdown on Page 9.
    1. Remove four 5/6" x 3/4" Allen head capscrews from
    the pump end cover on the shaft side of the pump
    with a 1/4" allen wrench.
    2. Install the oil seal lip in the gearbox cover (Ref. 3).
    Install the gearbox cover over the pump shaft and
    align the holes. Put four copper washers (Ref. 14)
    onto four 5/16 x 1-1/4" Allen head bolts (Ref. 5) and
    apply two drops of Loctite (supplied) onto threads.
    Secure the gearbox cover to the pump with the bolts.
    (Torque to 150 in. lbs.)
    3. Install the gasket (Ref. 4) onto the cover and align
    the gasket using the two dowel pins in the cover.
    4. Insert the 1-1/4" key into the pump shaft keyway.
    Slide the driven gear (Ref. 6) onto the pump shaft
    with the gear teeth towards the pump. Slide the gear
    until it butts up against the shoulder on the pump
    shaft. Secure the gear with two set screws using a
    5/32" Allen wrench.
    5. Place the gearbox body (Ref. 12) onto the gearbox
    cover, again using the dowel pins as an alignment
    guide. Secure the gearbox body with five 5/6" x 1"
    Allen head capscrews (Ref. 9) using a 1/4" Allen
    wrench to tighten securely. (Torque to 150 in. lbs.)
    6. Install the pump support bracket (Ref. 22) onto pump
    on opposite side from the gearbox. Secure with two
    3/4" hex head bolts (supplied with pump) and tighten
    with 9/16" box end wrench.
    7. Insert the 3-1/4" key for Model 8000-0015 or 2-1/2"
    key for Model 8000-0021 into the gas engine shaft
    keyway. Apply Never Seize to the gas engine shaft
    and the inside of the driver gear.
    8. Install the pump/gearbox assembly onto the gas
    engine shaft and secure with four hex head bolts
    and tighten securely with a 5/8" open end wrench
    for Model 8000-0015 and a 1/2" wrench for Model
    8000-0021. Failure to follow this procedure will
    result in seal damage.
    9. Secure the pump support bracket to the base.
    10. Remove the plug (Ref. 7) from overfill hole and
    dipstick (Ref. 10) and fill the gearbox with 90 weight
    gearlube until it pours out the overflow hole. Reinstall
    the plug and dipstick.
    11. Make sure the pump is filled with 26 oz. of Hypro Oil.
    Refer to the recommended lubrication marked on the
    crankcase of the pump.
    1. Always size your unloader valve to match the
    capabilities of your system for pressure (psi) and
    volume (gpm).
    2. In rigid-piped systems, a pulsation dampener or
    accumulator MUST be installed in the system. Select
    a dampener which conforms to the rated capacity.
    3. Never replace the main spring with one of heavier
    tension to increase pressure. Never add washers to
    increase spring tension.
    4. Always replace safety shields caps.
    5. Secure all locking devices to eliminate the unloader
    from vibrating out of adjustment during operation.
    -9-
    1 1 1610-0021 Key (1-1/4" long)
    2 1 2102-0017 Seal
    3 1 0703-8800A Gearbox cover
    4 1 1710-0013 Gasket
    5 4 2220-0055 Socket head bolt
    6 1 3900-0032 Gear
    7 1 2406-0012 Plug pipe
    8 2 2230-0012 Set screw
    9 5 2220-0056 Socket head bolt
    10 1 2630-0010 Oil dipstick assembly
    11 1 1700-0078 Gasket
    12 1 0704-8800A Gearbox body
    13 1 3900-0033 Driver gear (Model 8000-0015)
    13 1 3900-0037 Driver gear (Model 8000-0021)
    14 4 2270-0012 Washer gasket
    15 1 2007-0049 Needle bearing
    16 1 2102-0020 Seal
    17 1 1610-0039 Key
    17 1 1610-0040 Key (Model 8000-0021)
    18 1 2406-0018 Drain plug
    19 1 1700-0089 Washer gasket
    22 1 1510-0064 Bracket (Model 8000-0021)
    22 1 1510-0065 Bracket (Model 8000-0021)
    22 1 1510-0066 Bracket (Model 8000-0015)
    24 4 2210-0086 Hex head screw
    (Model 8000-0015)
    24 4 2210-0077 Hex head screw
    (Model 8000-0021)
    25 1 2265-0009 Thrust washer
    26 4 1410-0084 Spacer (Model 8000-0015)
    2 1600-0056 Locating pin (not shown)
    2 2160-0017 Loctite (not shown)
    1 2160-0018 Anti-seize (not shown)
    Ref. Qty. Part Description Ref. Qty. Part Description
    No. Reqd. Number No. Reqd. Number
    Parts List 8000-0015 and 8000-0021 Gearboxes
    -10-
    Models 2220B-P, 2221B-P, 2230B-P, 2231B-P
    2220A-P, 2221A-P, 2230A-P, 2231A-P
    37
    34
    35
    21 22
    36
    18
    42
    45 21 44
    48 18
    36
    43
    40
    46
    49
    47
    41
    20
    * **
    21
    22
    25 23
    2830 29
    18
    31
    32
    27
    26
    24
    15
    19
    18
    39
    4
    3
    B A
    2 1
    5
    1
    17
    13 C 16 14
    6
    9 11
    7
    M
    L
    K
    7
    10
    12
    J
    I
    8
    33
    38
    E
    FD
    G D
    * Plunger seal kit when the low pressure
    packing is preloaded into the cup retainer.
    ** Plunger seal kit when the low pressure packing
    is not preloaded into the cup retainer.
    -11-
    PowerLine Plus Parts List
    Models 2220B-P, 2221B-P, 2230B-P, 2231B-P
    2220A-P, 2221A-P, 2230A-P, 2231A-P
    1 4 2404-0302 Valve cap (aluminum)
    1 4 2404-0300 Valve cap (brass)
    2 4 1720-0205 O-ring
    3 1 Set 3430-0506 Valve kit-STD (stainless steel)
    Consists of: 4 valve assemblies
    (Ref. A), 4 o-rings (Ref. B)
    4 4 2220-0051 Socket head capscrew
    4 4 2220-0101 Socket head capscrew
    (stainless steel)
    5 1 0201-2200B Head (brass)
    5 1 0201-2200A Head (aluminum)
    6 2 Sets 3430-0514 Plunger kit
    Consists of: 1 o-ring, 1 ceramic
    plunger (Ref. C), 1 backup seal,
    1 slinger ring
    7 1 Set 3430-0243 Solid shaft base kit
    Consists of: 2 bases (Ref. I),
    4 hex head capscrews (Ref. J)
    7 1 Set 3430-0244 Hollow shaft base kit
    Consists of: 1 base (Ref. L),
    2 rubber bumpers (Ref. K),
    2 hex head cap screws (Ref. M)
    8 1 Set 3430-0505 Plunger seal kit (Buna-N, standard)
    Consists of: 4 U-cups (Ref. D),
    2 o-rings (Ref. E),
    2 seal rings (Ref. F),
    and backup rings (Ref. G)
    8 1 Set 3430-0501 Plunger seal kit (Viton)
    Consists of: 4 U-cups (Ref. D),
    2 o-rings (Ref. E),
    2 seal rings (Ref. F),
    and backup rings (Ref. G)
    8 1 Set 3430-0521* Plunger seal kit, loaded
    (Buna-N standard)
    Consists of: 4 U-cups (Ref. D),
    2 o-rings (Ref. E),
    2 seal rings (Ref. F)
    2 backup rings (Ref. G), and 2 cup
    retainers (Ref. 33)
    8 1 Set 3430-0518* Plunger seal kit, loaded (Viton)
    Consists of: 4 U-cups (Ref. D),
    2 o-rings (Ref. E), 2 seal rings (Ref. F),
    2 backup rings (Ref. G), and 2 cup
    retainers (Ref. 33)
    8 1 Set 3430-0524* Plunger seal kit, loaded
    (aluminum head)
    Consists of: 4 U-cups (Ref. D),
    2 o-rings (Ref. E), 2 seal rings (Ref. F),
    2 backup rings (Ref. G), and 2 cup
    retainers (Ref. 33)
    9 1 set 3430-0498 Oil seal repair kit
    Consists of: 2 inserts (Ref. 10),
    2 oil seals (Ref. 11), 2 o-rings (Ref. 12)
    10 2 0713-2300A Insert
    11 2 2102-0038 Oil seal
    12 2 1720-0206 O-ring
    13 2 1760-0005 Backup seal
    14 2 1720-0033 O-ring
    15 2 3500-0068 Plunger rod
    16 2 2270-0058 Slinger ring
    17 1 0102-2200A Crankcase
    18 12 2220-0041 Socket head capscrew
    19 1 0704-2200A Endplate
    20 1 2406-0019 Drain plug
    21 2 1720-0131 O-ring
    22 2 2007-0059 Needle bearing
    23 2 2404-0299 Wrist pin
    24 2 0501-8600A Connecting rod
    25 2 3270-0065 Spring retainer
    26 1 1720-0136 O-ring
    27 1 0713-2200A Cover, crankcase
    28 1 2630-0018 Sight glass
    29 1 1720-0202 O-ring
    30 1 1800-0016 Retainer
    31 1 1720-0209 O-ring
    32 1 2630-0008 Dipstick
    32 1 2404-0188 Shipping plug (solid)
    33 2 1830-0163 Cup retainer (brass head)
    33 2 1830-0164 Cup retainer (aluminum head)
    34 1 0501-8631F Crankshaft (Model 2231B-P)
    34 1 0501-8620F Crankshaft (Model 2220B-P)
    34 1 0501-8630F Crankshaft (Model 2230B-P)
    34 1 0501-8621F Crankshaft (Model 2221B-P)
    35 1 1610-0007 Key (solid shaft)
    36 1 0702-2200A End cover (solid shaft)
    36 1 0703-2200A End cover (5/8" hollow shaft)
    37 1 2102-0014 Shaft seal (solid shaft)
    38 2 2250-0051 Retaining nut
    39 4 2270-0079 Lock washer
    40 1 0708-2200A C-flange end cover
    (5/8" hollow shaft)
    41 1 0709-2200A Gas engine end cover
    (5/8" hollow shaft)
    41 1 0712-2200A Gas engine end cover
    (3/4" hollow shaft)
    42 1 1610-0011 Key (hollow shaft)
    43 1 2102-0015 Seal (5/8" hollow shaft)
    43 1 2102-0022 Seal (3/4" hollow shaft)
    44 1 2007-0047 Bearing (5/8" hollow only)
    44 1 2007-0051 Bearing (3/4" hollow only)
    45 2 2230-0017 Set screw
    46 4 2210-0020 Bolt
    47 4 2210-0081 Bolt
    48 1 0551-8620F Crankshaft (Model 2220B-P)
    48 1 0551-8630F Crankshaft (Model 2230B-P)
    48 1 0552-8621F Crankshaft (Model 2221B-P)
    48 1 0552-8631F Crankshaft (Model 2231B-P)
    48 1 0553-8631F Crankshaft (Model 2231-C only)
    49 1 2265-0010 Thrust washer (-C only)
    Ref. Qty. Part Description Ref. Qty. Part Description
    No. Reqd. Number No. Reqd. Number
    * Plunger seal kit with low pressure packing preloaded into the cup retainer.
    Note: See page 21 for Torque Specifications on above models.
    -12-
    38
    4
    1
    1
    3 2
    5
    C
    37
    13 14
    16
    6
    9 11
    10
    12
    17
    I
    7
    J
    19
    20 21 22 25 23
    28 30 29
    18
    31
    32
    27
    26
    24
    15
    18
    8
    41
    FD
    EG D
    B A
    33
    34
    21 22
    35
    36
    18
    33A
    39
    42
    34A
    40
    22A
    21
    35A
    36A
    E
    H G
    F
    C
    43
    B
    D
    A
    * **
    * Plunger seal kit when the low pressure
    packing is preloaded into the cup retainer.
    ** Plunger seal kit when the low pressure packing
    is not preloaded into the cup retainer.
    Models 2330B-P, 2331B-CP, 2340B-P, 2345B-P,
    2351B-P, 2354B-CP and 2359B-P
    1 6 2404-0300 Valve cap (brass)
    1 1 2404-0305 Valve cap w/1/4" NPT port (optional)
    2 6 1720-0205 O-ring
    3 1 Set 3430-0491 Valve kit-std. (stainless steel)
    Consists of: 6 valve assemblies
    (Ref. A), 6 o-rings (Ref. B)
    4 6 2220-0051 Socket head capscrew
    4 6 2220-0101 Socket head capscrew
    (stainless steel)
    5 1 0201-2300B Head (brass)
    6 3 Sets 3430-0514 Plunger kit ( Models 2330B-P,
    2340B-P, 2345B-P and 2331B-CP)
    Consists of: 1 o-ring, 1 plunger
    (Ref. C), 1 backup seal,
    1 slinger ring
    6 3 Sets 3430-0513 Plunger kit (Models 2359B-P,
    2354B-CP and 2351B-P) Consists
    of: 1 o-ring, 1 plunger (Ref. C), 1
    backup seal, 1 slinger ring
    7 1 Set 3430-0269 Base kit Consists of: 2 bases (Ref.
    I), 4 hex head capscrews (Ref. J)
    8 1 Set 3430-0493 Plunger seal kit (Buna-N, standard)
    (Models 2330B-P, 2331B-CP,
    2340B-P and 2345B-P)
    Consists of: 6 U-cups (Ref. D),
    3 o-rings (Ref. E), 3 seal rings
    (Ref. F), 3 backup rings (Ref. G)
    8 1 Set 3430-0492 Plunger seal kit (Buna-N, standard)
    (Models 2359B-P, 2351B-P and
    2354B-CP) Consists of: 6 U-cups
    (Ref. D), 3 o-rings (Ref. E), 3 seal
    rings (Ref. F), 3 backup rings (Ref.G)
    8 1 Set 3430-0502 Plunger seal kit (Viton)
    (Models 2330B-P, 2331B-CP,
    2340B-P, and 2345B-P)
    Consists of: 6 U-cups (Ref. D),
    3 o-rings (Ref. E),
    3 seal rings (Ref. F), and
    3 backup rings (Ref. G)
    8 1 Set 3430-0523* Plunger seal kit, loaded (Buna-N,
    standard) (Models 2330B-P, 2331BCP,
    2340B-P, 2345B-P) Consists of:
    6 U-cups (Ref. D), 3 o-rings (Ref. E),
    3 seal rings (Ref. F), 3 backup rings
    (Ref. G), and 3 cup retainers (Ref.
    41)
    8 1 Set 3430-0522* Plunger seal kit, loaded (Buna-N,
    standard)
    (Models 2359B-P, 2351B-P, 2354BCP)
    Consists of: 6 U-cups (Ref. D),
    3 o-rings (Ref. E), 3 seal rings (Ref. F),
    3 backup rings (Ref. G), and 3 cup
    retainers (Ref. 41)
    8 1 Set 3430-0519* Plunger seal kit, loaded (Viton)
    (Models 2330B-P, 2331B-CP, 2340BP,
    2345B-P) Consists of: 6 U-cups
    (Ref. D), 3 o-rings (Ref. E), 3 seal
    rings (Ref. F), 3 backup rings (Ref.
    G), and 3 cup retainers (Ref. 41)
    9 1 set 3430-0499 Oil seal repair kit
    Consists of: 3 inserts (Ref. 10), 3 oil
    seals, (Ref. 11) and 3 o-rings (Ref. 12)
    10 3 0713-2300A Insert
    11 3 2102-0038 Oil seal
    12 3 1720-0206 O-ring
    13 3 1760-0005 Backup seal
    14 3 1720-0033 O-ring
    15 3 3500-0068 Plunger rod
    16 3 2270-0058 Slinger ring
    17 1 0102-2300A Crankcase
    18 12 2220-0041 Socket head capscrew
    19 1 0704-2200A End plate
    20 1 2406-0019 Drain plug
    21 2 1720-0131 O-ring
    22 2 2007-0059 Needle bearing (solid shaft)
    22A 1 2007-0051 Needle bearing (3/4" hollow shaft)
    23 3 2404-0299 Wrist pin
    24 3 0501-8600A Connecting rod
    25 3 3270-0065 Spring retainer
    26 1 1720-0203 O-ring
    27 1 0707-2300A Cover
    28 1 2630-0018 Sight glass
    29 1 1720-0202 O-ring
    30 1 1800-0016 Retainer
    31 1 1720-0209 O-ring
    32 1 2630-0008 Dipstick
    32 1 2404-0188 Shipping plug
    33 1 0502-8730F Crankshaft (Model 2330B-P)
    33 1 0502-8740F Crankshaft (Models 2340B-P and
    2359B-P)
    33 1 0503-8745F Crankshaft (Model 2345B-P and
    2351B-P)
    33A 1 0551-8731F Crankshaft (Model 2331B-CP and
    2354B-CP)
    34 1 1610-0007 Key (solid shaft)
    34A 1 1610-0011 Key (hollow shaft)
    35 1 0702-2200A End Cover
    35A 1 0712-2200A End cover for gas engine
    36 1 2102-0014 Shaft Seal (solid shaft)
    36A 1 2102-0022 Shaft seal (hollow shaft)
    37 3 2250-0051 Retaining Nut
    38 6 2270-0079 Lock Washer
    39 2 2230-0017 Set screw
    40 4 2210-0081 Bolt
    41 3 1830-0162 Cup Retainer (Models 2359B-P,
    2351B-P, 2354B-CP )
    41 3 1830-0163 Cup Retainer (Models 2330B-P,
    2331B-CP, 2340B-P, and 2345B-P)
    42 1 2265-0010 Thrust washer (-C only)
    43 1 8000-0042 Clutch Kit (Model 2359B-PY)*
    Consists of: 1 clutch assembly
    (Ref. B), 1 bracket (Ref. C),
    1 small spacer (Ref. D), 1 large
    spacer (Ref. E), 1 key (Ref. F),
    4 socket head cap screws (Ref. G)
    and 4 washers (Ref. H).
    *Fits 2359B-P and 2340B-P
    -13-
    PowerLine Plus Parts List
    Models 2330B-P, 2331B-CP, 2340B-P, 2345B-P, 2351B-P, 2354B-CP, & 2359B-P
    Ref. Qty. Part Description Ref. Qty. Part Description
    No. Reqd. Number No. Reqd. Number
    * Plunger seal kit with low pressure packing preloaded into the cup retainer.
    Note: See page 21 for Torque Specifications on
    above models.
    -14-
    Models 2303B-P, 2304B-P and 2314B-P
    1 6 2404-0300 Valve cap (brass)
    1 1 2404-0305 Valve cap w/1/4" NPT port (optional)
    2 6 1720-0205 O-ring
    3 1 Set 3430-0491 Valve kit-std. (stainless steel)
    Consists of: 6 valve assemblies,
    6 o-rings
    4 6 2220-0051 Socket head capscrew
    4 6 2220-0101 Socket head capscrew
    (stainless steel)
    5 1 0201-2300B Head (brass)
    6 3 Sets 3430-0514 Plunger kit consists of: 1 o-ring,
    1 plunger, 1 backup seal,
    1 slinger ring
    7 1 Set 3430-0269 Base kit consists of: 2 bases
    (Ref. I), 4 hex head capscrews
    (Ref. J)
    7 1 Set 3430-0530 Optional base kit (Cat 310 & 5CP)
    Consists of: 2 bases (Ref. I),
    4 hex head capscrews (Ref. J)
    8 1 Set 3430-0539** Plunger seal kit (car wash seals
    only) (Models 2303B-P, 2304B-P, &
    2314B-P) Consists of: 3 high psi
    seals (Ref. L), 3 o-rings (Ref. E), 3
    vacuum seals (Ref. K), 3 backup
    rings (Ref.G), 3 low psi cups (Ref. F)
    8 1 Set 3430-0533* Plunger seal kit, loaded (Buna-N,
    standard) (Models 2303B-P 2304BP,
    & 2314B-P) Consists of: 3 high psi
    seals (Ref. L), 3 o-rings (Ref. E), 3
    vacuum seals, 3 backup rings
    (Ref. G), 3 cup retainers (Ref. 41),
    and 3 low psi u-cups (Ref. F).
    9 1 set 3430-0534 Oil seal repair kit consists of: 3
    inserts (Ref. 10), 3 oil seals, (Ref. 11)
    and 3 o-rings (Ref. 12)
    10 3 0714-2300A Insert
    11 3 2102-0038 Oil seal
    12 3 1720-0206 O-ring
    13 3 1760-0005 Backup seal
    14 3 1720-0033 O-ring
    15 3 3500-0068 Plunger rod
    16 3 2270-0058 Slinger ring
    17 1 0102-2300A Crankcase
    18 12 2220-0041 Socket head capscrew
    19 1 0704-2200A End plate
    20 1 2406-0019 Drain plug
    21 2 1720-0131 O-ring
    22 2 2007-0059 Needle bearing (solid shaft)
    23 3 2404-0299 Wrist pin
    24 3 0501-8600A Connecting rod
    25 3 3270-0065 Spring retainer
    26 1 1720-0203 O-ring
    27 1 0707-2300A Cover
    28 1 2630-0018 Sight glass
    29 1 1720-0202 O-ring
    30 1 1800-0016 Retainer
    31 1 1720-0209 O-ring
    32 1 2630-0008 Dipstick
    32 1 2404-0188 Shipping plug
    33 1 0502-8730F Crankshaft (Model 2303B-P)
    33 1 0502-8740F Crankshaft (Models 2304B-P)
    33 1 0503-8745F Crankshaft (Model 2314B-P)
    34 1 1610-0007 Key (solid shaft)
    35 1 0702-2200A End Cover
    36 1 2102-0014 Shaft Seal (solid shaft)
    37 3 2250-0051 Retaining Nut
    38 6 2270-0079 Lock Washer
    39 1 3500-0070 Plunger
    41 3 1830-0163 Cup Retainer (Models 2303B-P,
    2304B-P, 2314B-P)
    -15-
    * Plunger seal kit with low pressure packing preloaded
    into the cup retainer.
    ** Seals (not pre-loaded) only.
    Ref. Qty. Part Description Ref. Qty. Part Description
    No. Reqd. Number No. Reqd. Number
    Car Wash Parts List
    Models 2303B-P, 2304B-P and 2314B-P
    Note: See page 21 for Torque Specifications on above models.
    -16-
    Models 2410B-P, 2411B-P, 2412B-P, 2413B-P, 2414B-P,
    2430B-P, 2431B-P, 2432B-P, 2433B-P and 2434B-P
    -17-
    PowerLine Plus Parts List
    Models 2410B-P, 2411B-P, 2412B-P, 2413B-P, 2414B-P, 2430B-P, 2431B-P,
    2432B-P, 2433B-P and 2434B-P
    1 6 0707-2400B Valve cap
    2 6 1720-0135 O-ring
    3 1 Set 3430-0316 Valve kit
    Consists of: 6 valve assemblies
    (Ref. A), 6 o-rings (Ref. B)
    4 6 2220-0029 Head bolt
    5 1 0203-2400B Forged brass head
    6 3 Sets 3430-0321 Plunger kit (Models 2410B-P,
    2411B-P, 2412B-P, 2430B-P,
    2431B-P, and 2432B-P) Consists
    of: 1 backup seal, 1 plunger
    (Ref. H), 1 slinger ring, 1 o-ring
    6 3 Sets 3430-0322 Plunger kit (Models 2413B-P,
    2414B-P, 2433B-P, and 2434B-P)
    Consists of: 1 backup seal,
    1 plunger (Ref. H), 1 slinger ring,
    1 o-ring
    7 1 Set 3430-0303 Base kit (standard)
    Consists of: 2 bases (Ref. J),
    4 bolts (Ref. K)
    7 1 Set 3430-0304 Base kit (Cat 310 mounting)
    Consists of: 2 bases (Ref. L),
    4 bolts (Ref. M)
    7 1 Set 3430-0305 Base kit (Cat 530
    mounting) Consists of: 2 bases
    (Ref. L), 4 bolts (Ref. M)
    8 1 Set 3430-0485 Seal kit (Models 2410B-P, 2411B-P,
    2412B-P, 2430B-P, 2431B-P, and
    2432B-P) Consists of: 3 high
    pressure seals (Ref. A), 3 backup
    rings (Ref. B), 6 o-rings (Ref. 3B),
    3 low pressure seals (Ref. C),
    3 seal rings (Ref. D), 3 o-rings
    (Ref. E), 3 o-rings (Ref. P)
    8 1 Set 3430-0486 Seal kit (Models 2413B-P, 2414B-P,
    2433B-P, and 2434B-P)
    Consists of: 6 high pressure seals
    (Ref. A & C) 3 backup rings (Ref. B),
    6 o-rings (Ref. 3B), 3 seal rings
    (Ref. D), 3 o-rings (Ref. E),
    3 o-rings (Ref. P)
    9 3 1830-0159 Retainer ring (Models 2410B-P,
    2411B-P, 2412B-P, 2430B-P,
    2431B-P, and 2432B-P)
    9 3 1830-0158 Retainer ring (Models 2413B-P,
    2414B-P, 2433B-P, and 2434B-P)
    10 3 1830-0169 Seal retainer (Models 2410B-P,
    2411B-P, 2412B-P, 2430B-P,
    2431B-P, and 2432B-P)
    11 3 1830-0167 Vac seal retainer (Models 2410B-P,
    2411B-P, 2412B-P, 2430B-P,
    2431B-P, and 2432B-P)
    11 3 1830-0166 Vac seal retainer (Models 2413B-P,
    2414B-P, 2433B-P, and 2434B-P)
    12 3 1830-0160 Retainer (Models 2410B-P, 2411B-P,
    2412B-P, 2430B-P, 2431B-P
    and 2432B-P)
    12 3 1830-0168 Retainer (Models 2413B-P, 2414B-P,
    2433B-P, and 2434B-P)
    13 3 3500-0062 Lower plunger guides
    14 3 2250-0051 Retaining nut
    15 3 2102-0018 Oil seal
    16 1 0102-2400A Crankcase
    17 16 2220-0053 Bolt
    18 1 0701-2400A End cover
    19 1 2406-0019 Plug
    20 2 1720-0136 O-ring
    21 2 2002-0006 Bearing (Models 2410B-P, 2411B-P,
    2412B-P, 2413B-P and 2414B-P)
    (ball bearing)
    21 2 2009-0001 Bearing (Models 2430B-P, 2431B-P
    2432B-P, 2433B-P, and 2434B-P)
    (roller bearing)
    22 3 2404-0169 Wrist pin
    23 3 0500-8800A Connecting rod
    24 1 1700-0095 End cover gasket
    25 1 0703-2400A End cover
    26 1 1700-0078 Gasket
    27 1 2630-0010 Oil dipstick assembly
    27 1 2404-0188 Shipping plug (solid)
    28 1 0501-8850D Crankshaft (Models 2410B-P and
    2430B-P)
    28 1 0501-8851D Crankshaft (Models 2411B-P,
    2413B-P, 2431B-P, and 2433B-P)
    28 1 0501-8852D Crankshaft (Models 2412B-P,
    2414B-P, 2432B-P, and 2434B-P)
    29 1 1610-0021 Key
    30 1 0700-2400A End cover
    31 1 2102-0017 Seal
    32 1 2630-0011 Oil sight glass
    33 1 1700-0094 Gasket
    34 3 2270-0059 Slinger ring
    35 3 1760-0005 Backup seal
    36 3 1720-0033 O-ring
    37 3 1440-0085 Guide
    38 3 1830-0155 Guide retainer
    39 3 1720-0061 O-ring
    40 6 2270-0083 Washer
    Ref. Qty. Part Description Ref. Qty. Part Description
    No. Reqd. Number No. Reqd. Number
    Note: See page 21 for Torque Specifications on above models.
    -18-
    Performance Charts for PowerLine Plus 2200s
    Performance Charts for PowerLine Plus 2300s
    Model
    2220B-P
    English Standard Metric Standard
    PSI 500 700 1000 1300 1500 2000
    RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP
    1000 1.2 0.5 1.2 0.7 1.2 0.9 1.2 1.1 1.2 1.2 1.2 1.6
    1450 1.7 0.8 1.7 1.0 1.7 1.4 1.7 1.6 1.7 1.8 1.7 2.3
    1600 1.9 0.9 1.9 1.1 1.9 1.5 1.9 1.8 1.9 2.1 1.9 2.7
    1725 2.1 0.8 2.1 1.1 2.1 1.5 2.0 1.9 2.0 2.1 2.0 2.9
    Model
    2221B-P
    BAR 34 48 69 90 103 138
    RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw
    1000 4.5 0.4 4.5 0.5 4.5 0.7 4.5 0.8 4.5 0.9 4.5 1.2
    1450 6.4 0.6 6.4 0.7 6.4 1.0 6.4 1.2 6.4 1.3 6.4 1.7
    1600 7.2 0.7 7.2 0.8 7.2 1.1 7.2 1.3 7.2 1.6 7.2 2.0
    1725 7.9 0.6 7.9 0.8 7.9 1.1 7.6 1.4 7.6 1.6 7.6 2.2
    Model
    2230B-P
    PSI 500 700 1000 1300 1500 2000
    RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP
    1000 1.9 0.8 1.9 1.0 1.9 1.3 1.8 1.7 1.8 1.9 1.8 2.4
    1450 2.7 1.1 2.7 1.4 2.7 2.0 2.7 2.4 2.7 2.8 2.7 3.6
    1600 3.0 1.2 3.0 1.6 3.0 2.3 3.0 2.8 2.9 3.1 2.9 4.1
    1725 3.2 1.4 3.2 1.9 3.2 2.4 3.1 3.0 3.1 3.4 3.1 4.4
    BAR 34 48 69 90 103 138
    RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw
    1000 7.2 0.6 7.2 0.7 7.2 1.0 6.8 1.3 6.8 1.4 6.8 1.8
    1450 10.2 0.8 10.2 1.0 10.2 1.5 10.2 1.8 10.2 2.1 10.2 2.7
    1600 11.4 0.9 11.4 1.2 11.4 1.7 11.4 2.1 11.0 2.3 11.0 3.1
    1725 12.1 1.0 12.1 1.4 12.1 1.8 11.7 2.2 11.7 2.5 11.7 3.3
    PSI 500 700 1000 1300 1500
    RPM GPM HP GPM HP GPM HP GPM HP GPM HP
    1800 1.2 0.5 1.2 0.6 1.1 0.8 1.1 1.0 1.1 1.2
    2600 1.7 0.6 1.7 0.9 1.6 1.1 1.6 1.5 1.6 1.7
    2875 1.8 0.7 1.8 0.9 1.8 1.3 1.8 1.6 1.7 1.8
    3450 2.1 0.8 2.1 1.0 2.1 1.5 2.1 1.9 2.0 2.1
    BAR 34 48 69 90 103
    RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw
    1800 4.5 0.4 4.5 0.5 4.2 0.6 4.2 0.8 4.2 0.9
    2600 6.4 0.5 6.4 0.7 6.1 0.9 6.1 1.2 6.1 1.3
    2875 6.8 0.6 6.8 0.7 6.8 1.0 6.8 1.2 6.4 1.4
    3450 7.9 0.6 7.9 0.8 7.9 1.2 7.9 1.5 7.6 1.6
    Model
    2231B-P
    PSI 500 700 1000 1300 1500
    RPM GPM HP GPM HP GPM HP GPM HP GPM HP
    1800 1.8 0.8 1.8 1.0 1.8 1.4 1.7 1.7 1.7 1.9
    2600 2.5 1.2 2.5 1.5 2.5 2.0 2.5 2.4 2.5 2.7
    2875 2.8 1.2 2.8 1.6 2.7 2.1 2.7 2.7 2.7 2.9
    3450 3.2 1.5 3.2 1.9 3.2 2.5 3.2 3.2 3.1 3.5
    BAR 34 48 69 90 103
    RPM L/m Kw L/m Kw L/m Kw L/m Kw L/m Kw
    1800 6.8 0.6 6.8 0.7 6.8 1.0 6.4 1.3 6.4 1.4
    2600 9.5 0.9 9.5 1.1 9.5 1.5 9.5 1.8 9.5 2.0
    2875 10.6 0.9 10.6 1.2 10.2 1.6 10.2 2.0 10.2 2.2
    3450 12.1 1.1 12.1 1.4 12.1 1.9 12.1 2.4 11.7 2.6
    Models 2303B-P, 2304B-P,
    2314B-P
    English Standard Metric Standard
    PSI 500 700 1000 1200
    RPM GPM HP GPM HP GPM HP GPM HP
    1100 3.1 1.3 3.1 1.6 3.1 2.1 3.1 2.4
    1450* 4.1 1.5 4.0 2.0 4.0 2.7 4.0 3.2
    1725** 3.1 1.2 3.1 1.7 3.1 2.2 3.1 2.6
    1725*** 4.3 1.6 4.3 2.0 4.2 2.9 4.2 3.4
    BAR 34 48 69 83
    RPM L/m Kw L/m Kw L/m Kw L/m Kw
    1100 11.7 1.0 11.7 1.2 11.7 1.6 11.7 1.8
    1450* 15.5 1.1 15.1 1.5 15.1 2.0 15.1 2.4
    1725** 11.7 0.9 11.7 1.3 11.7 1.6 11.7 1.9
    1725*** 16.3 1.2 16.3 1.5 15.9 2.2 15.9 2.5
    * 2314 only, ** 2303 only, *** 2304 only * 2314 only, ** 2303 only, *** 2304 only
    Model
    2330B-P
    PSI 500 700 1000 1300 1500 2500
    RPM GPM HP GPM HP GPM HP GPM HP GPM HP GPM HP
    1000 1.8 0.





Carpet Cleaning Equipment Truckmount Truck Mount Truckmounted Extractor

Steambrite will ship the Hypro 2359B-P Pump TriPlex Plunger 3.5 gpm 3000psi 1725 rpm [2359B-P] by either Fedex or Freight Quote, and will normally be shipped within 2-5 working days. Equipment small enough to be sent by Fedex should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.




This product was added to our store on Thursday 25 June, 2009.
Reviews
Product Datasheet Click on the Acrobat Symbol to download this page as a PDF Document

Shopping Cart Carpet Cleaning Equipment
0 items
Manufacturer Info
Hypro Pumps
Other products
Notifications Carpet Cleaning Equipment
NotificationsNotify me of updates to Hypro 2359B-P Pump TriPlex Plunger 3.5 gpm 3000psi 1725 rpm
Specials Carpet Cleaning Equipment
Pros Choice CTI 2050 Odor Eliminator 1 Gallon FREE Shipping
Pros Choice CTI 2050 Odor Eliminator 1 Gallon FREE Shipping
$42.83
$32.00
What's New? Carpet Cleaning Equipment
Used Steambrite 20 Hp Stainless TruckMount Carpet Cleaning Machine Kohler Engine 36 Blower w/hoses and wand TM2036 FREE Shipping
Used Steambrite 20 Hp Stainless TruckMount Carpet Cleaning Machine Kohler Engine 36 Blower w/hoses and wand TM2036 FREE Shipping



carpet cleaning equipment
Click here to Apply Online!

Videos

Steam Brite Hornet Truckmount Introduction Video - Part 1

Accepted Credit Cards & Paypal
1982 - 2013 Steambrite Supply
Carpet Cleaning Machines|Truck Mount Machines