Injectidry 55701 Floor Drying System 86380 Package MI22 [MI22]

Click to enlarge

Your Price: $5,745.64
Part Number: MI22
Quantity:
Estimated shipping cost: $ 223.00

Product Options
Extended Warranty:
Shipping Surcharges:

Injectidry 55701 Floor Drying System MI22 86380

Floor Drying Package

Injectidry's High Pressure Floor Drying Package is designed specifically for floor drying. This set-up is extremely quick, easy and efficient for your typical floor drying

HP60 Floor Drying Package Comes With:

1 - HP60 Unit
1 - Main AIR IN hose with Main Tee
1 - Main AIR OUT hose
1 - RH05A Roll of Tubing
1 - SILENCER
1 - 8 Point Panel
1 - Panel U Kit
8 - Vac T
8 - QCEPO1 End Cap Plugs
2 - PLO3 1.5" x 50' Blank HP hoses
40 - RP2 Bag of HP 3/8" Nipple Caps
6 - Multi Port Panels
1 - Clear Large Panel
30 - HC3 Hose Cuffs
6 - QCM01 Manifolds
1 - CB3 Panel Carry Bag
1 - CB2 Rolling Duffel Bag
4 - Hose Connectors
2 - Small Y

WARRANTY

HP60 Roto-Molded Housing Warranty - 7 Years

Injectidry Systems guarantees the HP60 housing to be free from defects in materials and workmanship for a period of seven (7) years from the original purchase date. This warranty is subject to the conditions listed below.

Blower Warranty - 3 Years

Injectidry Systems guarantees the blower to be free from defects in materials and workmanship for a period of three (3) years from the original purchase date. This warranty is subject to the conditions listed below.

Active Hoseline - 1 Year

Roto-Molded Housing Warranty:

Injectidry Systems will repair or replace for the original purchaser (at Injectidry's option), the parts necessary to correct any defects in materials and workmanship for a period of seven (7) years. During the first year, Injectidry Systems will cover all material, labor, and shipping costs to and from the service center. The customer is responsible for all labor and shipping costs after one (1) year from the original date of purchase.

Blower Warranty:

Injectidry Systems promises to the original purchaser to repair or replace (at Injectidry’s option), the
parts necessary to correct any blower unit found to be defectiv
e in materials or workmanship for a period of three (3) years fr
om the date of purchase. During the first year, Injectidry Systems will cover all material, labor, and shipping costs to and from the service center. The customer is responsible for all labor and shipping charges after one (1) year. Take precautions to keep bulk water* from being sucked into blower. The unit is not warranted against damage caused by bulk water* passing through the blower. Also take precautions to install the Main Hoses correctly, as stated in this manual. The unit is not warranted against damage caused by ingested materials passing through the blower.

Active Hoseline:

Warranted for one (1) year.

Limitations & Exclusions:

This warranty will not extend to Injectidry products showing any accidental damage, altera-
tion, normal wear, disassembly, lack of proper maintenance, damage from fire or flood, damage from corrosive or other chemicals, improper voltage use, unauthorized repairs, use of non-genuine parts and materials, misuse, or any other causes beyond the control of Injectidry. The warranty obligation extends only to the repairs or replacement of parts found to be defective upon the exami-nation and the decision of Injectidry Systems. The preceding limitations constitute the entire warranty. No other warranty or responsibility is expressed or implied. The warranty includes legal rights to the original purchaser, and additional rights may be available, varying state to state. In addition, Injectidry Systems Repair Department must authorize all incoming products and/or repair work to be completed by an authorized repair center. Injectidry Systems is not responsible for any repairs or modifications to any of its products, unless completed by Injectidry Systems or an authorized service center. We are not responsible for subsequent damage caused by the user and or its agents.

Bulk Water*: It is particularly important for the user not to allow bulk water to pass through the unit. This can happen on negative suction if water is present in the area of the injectors. Mist is not considered Bulk Water.

Compare to current or past OEM associations:
86380
55701
MI22

Steambrite will ship the Injectidry 55701 Floor Drying System 86380 Package MI22 [MI22] by either Fedex, UPS, USPS, or Freight Quote, and will normally be shipped within 2-5 business days (if in stock). Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Large Equipment could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Special order, or custom build items may take up to 30 days.
Next day, two day, and three day services are available.
Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Wednesday 05 November, 2014.