Ametek-lamb 116565-13 Three Stage Vacuum Motor 5 7 Plastic Horn By-pass - 116565-13

Ametek Lamb 116565-13, Three Stage Vacuum Motor 5.7in Tangential 120V, Sandia 10-0810, AV14 8.685-458.0 1920 A64342 [116565-13]

Click to enlarge

Your Price: $152.90
Part Number: 116565-13
Quantity:
Estimated shipping cost: $ 14.00

Product Options
Options:

Ametek Lamb 116565-13 Three Stage Vacuum Motor 5.7" Plastic Horn By-Pass 120 volts

Ametek 116565-13 vacuum motor has three stages and a single speed. Suitable for 120 volt AC operation, 50/60 Hz. Tangential bypass discharge with thermoset fan end bracket and aluminum commutator bracket.

5.7"/145mm 3-Stage Tangential Bypass Discharge - 116565-13

Motor Specs
Fits: Olympus, Hydro-Force FX and EX, Prochem, Mytee, Century, Sandia Plastic, Clean Storm, and many other machines.

Motor Type: Bypass
Discharge: Tangential
Bearings: Double Ball Bearing
Sealed Vacuum: 117.4 inches
Maximum Air Watts: 368
Maximum Air Flow: 99 CFM
Maximum Amp’s: 10.70
Motor Speed: 17,700 RPM

Vacmotor Discharge	Tangential
Vacmotor Size	5.7"
Vacmotor Stages	3
Amps	10.7 Open flow / 8.7 with hose and wand on the floor
Vacmotor Voltage	120V
Cross Reference Skus	AV14 Q6600-054AMP 0297546 116565-13 Tennent 130416 130996 Tornado 19118 Powrflite 19118 30041 408G 44911A 53130 Advance 56209095 Advance 56265096 740089 Prochem 8.685-458.0 86854580 993-1740 A13504 ASM130416 ASM130996 ASM56409 CI-130416-EA VM-25 VV67154 ZD63000A Sandia Plastic 10-0810 Powrflite 1920 19118 X9079 A64342 64342

Basic Model Data

Volts: 120	Discharge: Tangential
Fan Stages: 3	Fan Diameter: 5.7 Inches
Air Seal: Yes	Epoxy Paint: Yes
Double Insulation: No	Bearings: Double Ball
Type: Bypass

General Motor Performance

Rating Watts: 1300	Max Air Watts: 368
Sealed Vacuum: 117.4 Inches	Max Airflow: 99.0 CFM

10.7 amps open flow cfm / 6.7 amps @ sealed zero cfm / 8.7 amps average during use (wand on the floor)

Motor Performance Data Operating at 3/4" -- 19mm Orifice

Vacuum: 56.1 Inches	Airflow: 55.7 CFM
Input Watts: 1212	Input Amps: 10.3
Air Watts: 368	Motor Speed: 17,700 RPM

Factory brochure

2 Motor performance with average consumption of 17.4 amps:
Air Series performance:
199.6 Inches of lift @ Zero CFM
123.75 CFM @ Zero inches of lift
24,700.5 Vacuum units
Parallel performance:
117.4 Inches of lift @ Zero CFM
198 CFM @ Zero inches of lift
23,245.2 Vacuum Units
Will operate 75 ft of 1.5" Vacuum Hose or about 150 ft of 2" vacuum hose.

Shipping charges always apply even when picking up at Steambrite San Antonio, TX

Optional

Press On Vacuum Motor Inlet Tube, Cone, or Horn (suction side) SBMcone15 Esteam 355-405
Click link to watch video!

Add Vacuum Motor Lint Screen Filtration and Gasket to any vacuum motor

Gasket Vacuum Motors fits 5.7in Vacuum Motors 1/4" Thick PP43-807110 Mytee G004A PX13

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed.
Ametek Lamb 116565-13, Three Stage Vacuum Motor 5.7in Tangential 120V, Sandia 10-0810, AV14 8.685-458.0 1920 A64342 [116565-13]

Click here for our full shipping policy. Specifications are subject to change without notice.
Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.

This product was added to our store on Thursday 21 December, 2006.

Product Datasheet

Related Items:

20150326, Add Vacuum Motor Lint Screen, Filtration, and Gasket to any vacuum motor (20150326)	Electro Vacuum Motor Q6600-066A-MP-26, 3 stage 120V 5.7in Flat Bottom Fan-Vacuum, G13941 (Q6600-066A)	Ametek Lamb Mytee C351, 6.6 Inch Vacuum Motor Blower, 120 volts LX Tangential, 2 Stage 1 Speed (C351)
Gasket for 5.7in Vacuum Motor 1/8in Thick 5.5in OD X 4in ID 035-207-00 (035-207-00)	Ametek Lamb R11656513, Carbon Brush for 116565-13, 116474-37, 116579-00, 115923-00, EACH (R11656513)	Ametek Lamb 116764-13, Vacuum Motor, 120V By-Pass Design, 3 Stage, 5.7in dia., (8.685-476.0) (116764-13)
Hypro 5552190, Regulator Repair Kit for BPR Valve 2 Generic O-rings, 2111-002, PHY078-102, 3300-0084, BPR-Kit (5552190)	Ametek Lamb 116565-29, Vacuum Motor 120V Tangental Discharge, 3 Stage 5.7in dia, 8.685-474.0 (116565-29)	Ametek Lamb 115962, Vacuum Motor, 120 Volts 7.2 inches Diameter, 2M187 By-Pass Design, 2 Stage, 8.672-403.0 (115962)
Clean Storm PX13, Vacuum Motor Gasket, fits 5.7in Vacuum Motors, 1/4in Thick PP43-807110 Mytee G004A Hydrotek HL031 (PX13)	Ametek Lamb X1038-KIT-10, 065900016.00 3Stage Vacuum Motor w10gal Adaptor, Imperial 4 Bolt Mounting, ALL Orders FINAL (X1038-KIT-10)	Ametek Lamb X1038-KIT-3HD, 065900016.00 Vacuum Motor Adaptor kit Only, Imperial 4 Bolt Mounting, ALL Orders FINAL (X1038-KIT-3HD)

Customers who bought this also bought:

Carpet Cleaners Brass QD Coupler Sets 20230615, 1/4 Inch 8 Pack, Carpet Cleaning Quick Disconnect, Stainess Poppet Bundle	Hydro-Force B502, Floodjet Brass K2 1/4in MPT, 1629-0191	32-900195 Rocker Switch 2 Position On/Off, 4 pinned Mytee E515, Sandia Plastic 10-0803, Kaivac 86162010
PMF H51-8001.5SS x 5ea - 1/8'' S/S Jets Stainless Steel Jet Nozzle Each	Pumptec 70034 Unloader, Pressure Regulator, 450-500 PSI, MV520, 3/8 M(2) F(1) Ports Blue Spring VR54 GTIN: N/A	WestPak 20-0030 Valve 1200 psi Soft Touch Brass For Carpet Cleaning Wands Mytee B133A Sapphire Scientific 27-013 AW791
AH102B, Portable 1/4 Inch Male Brass QD, Quick Disconnect, ONE Import with Stainless Poppet, 86970800, Mytee MYB101 Plug	Pumptec 81662 Series 207V-085/M9253F 120v 4 1/4in Ports Gold Black 500Psi Nilfisk 56113074 56113117 (Replaced by 81401)	Water and Air 1000Psi Pressure Gauge Stainless Steel Back Connection, 8.914-830.0 70066A G13051, 89148300 GTIN 783583824576
Clean Storm 180-120 Dual Rod In Line Water Heater 1750 watt (Large style) X9105	Pumptec 20220629 1200 psi Upgrade Kit for Carpet Cleaning Machines Convert Carpet machine to tile cleaning GTIN: N/A	Shurflo 8030-863-299, 150psi Pump Viton Seals w/Bypass, 115volt 1.5gpm G11234 8.686-963.0 GTIN 734943369206

116565-13 for only $152.90 - Steambrite's price on the Vacuum Motors - 116565-13 extractor, Equipmentcarpet cleaning equipment, Equipment flood restoration, Equipment carpet cleaning machine,

Ametek Lamb 116565-13 Three Stage Vacuum Motor 5.7" Plastic Horn By-Pass 120 volts