Trailer Truck Mount 31 Hp 3000psi HOT 5gpm 15hg Vacuum BE9000 Watt Generator 200 Gal Fresh Tank Hydrotek SK30005VHT185SKH HOT Pressure Washer Hot2Go (In Stock)
It is both a Carpet Cleaning Trailer Package and Pressure Washing Trailer Package.
You choose between self assembly or assembled complete ready to go to work.
Assembly labor not included but all the parts are to save you money.
What will you have to do to make this trailer:
1. bolt the trailer tongue on with the supplied ball and jack holder.
2. Add a second unloader, freeze blow out, and change out the pressure switch. (all parts included)
3. Relocate the two reels from inbound to outbound system (brackets included)
4. Add support beams and aluminum diamond tread-plate to the back to support the generator and Goliath Quad 6.6 trailer-mount vacuum system (all parts included)
5. Add mud flaps to trailer fenders (mud flaps included)
6. Add a heat shield to generator and exhaust deflector. (parts provided)
7. Mount generator and Goliath Quad 6.6 trailer mount to back of trailer. (provided)
8. Mount the 160 ft tile and carpet cleaning reel to the top left wheel fender. (provided)
9. Unbolt the skid pressure washer and bolt in the angle iron to extend the frame 10 inches forward and bolt in the pressure washer.
10. Install the Rokan V49-200 vacuum reel between the fresh water tank and skid pressure washer
Tools needed: drill, sockets, wenches, drill bits, drill cutting oil, 4.5" cuff off wheel and grinder (trim diamond tread-plate).
- Save money and build your own truckmount or let us assemble for you.
- Instantly toggle back and forth between pressure washing, tile and grout cleaning, carpet cleaning, sewer jetting, mattress cleaning.
- Quit walking over all the money laying on the driveway and sidewalk as you walk towards your carpet and tile cleaning work.
- Super Compact trailer cleans hotter than heat exchange truckmounts.
- Non stop flood and water extraction capabilities. (normal truckmount have to drain their waste tank every 5 to 10 minutes in heavy flood water extraction work, this unit automatically discharges 30 gallons every 60 seconds.)
- On board generator to running seaming iron, scrubbing machine, fans, rotary power wands with job site is without power.
- Includes Four hose reels: Tile and Carpet Cleaning, Pressure Washing, Garden Hose and vacuum hose.
- Only burn enough fuel you need for the job at hand. Only run the pressure washer when you need pressure, only run the generator when you need vacuum. Optionally plug the Goliath Trailer-mount into a 240 volt outlet.
- Can be towed with any pickup truck (water removed from tanks)
- Cost less than many truckmounts but cleans more surface types. (most truckmounts cannot clean concrete at 3000 psi)
- 200 gallon fresh water tank mean cleaning larger jobs between refills
- Self contained, no garden hose or electricity required.
- Easier to service and maintain - everything is easy access.
- Compact design is only 10 ft (120" L) X 5.7 ft (69") W X 5.3 ft (63.5") H
- Pressure washer already includes dual 8 gallon fuel tanks / 6.6 gallon for generator.
Optional Build and assembly labor $3200 and then ships from San Antonio, TX 78266
Cash Priced. This will require wire transfer payment. Ships to nearest hold at dock location. Credit cards not accepted on this item as credit card payments require shipping to the billing address. Unloading this trailer will require forklift extensions and special front load rigging that is not available at your home. You will have to bolt the trailer tongue onto the trailer in the trucking company yard, so bring tools with you. Uses 2" towing ball. Home delivery is not an option. If you have forklift extensions, special heavy duty 3" wide ratchet straps, and want to delivery to your credit card billing address, credit card surcharge is 3% more.
TM31-340 Truck Mount Trailers and Recovery Carpet Cleaning and Pressure Washing Trailer Package Includes the follow parts:
Hot/Cold/Steam power washer with all features of SK Series washers
200 Gallon capacity tank with inlet water filter strainer to protect pump from debris
Stainless steel inlet & high pressure hose reels, includes 150' high pressure 4000 psi hose (SteamBrite exclusive for this webpage) & 100' inlet garden hose
Single axle T185SKH trailer:
3700# rated torsion axles for smooth ride
Flip up locking wheeled jack
Heavy duty steel powder coated fenders and recessed lights
2" ball tongue lock.
SK30005VH Hot skid pressure washer
3000psi @ 5gpm, 479cc Vanguard Engine
15,000 cleaning units cold/ 30,000 cleaning units HOT (speed of cleaning)
Both the factory and SteamBrite reserve the right to change exact specifications without notice, including but not limited to the exact parts used for the build.
Add a second unloader to be able to clean more surface types
"Vacuum is awesome! I love the automatic flood pumping ability. I have worked with the Boxxer 427 for many years and found my Goliath Quad 6.6 feels stronger to me!"
Trailer Truck Mount
Carpet Cleaning Trailer For Sale
Truckmount in Trailer
Truckmount Package Deals
Carpet Cleaning Equipment
Trailer Truckmount For Sale
Carpet Cleaning Trailer Package
pressure washer recycling
vacuum system pressure washing
Water recovery vacuum systems
Pressure washer Vacuum system
Sirocco vacuum reclaim
Sirocco vacuum system
Truck Mount Comparison Chart
Changes in prices and equipment design subject to change without notice.
Results on this page are only our best guess and to not represent actual testing results.
Information to be used for entertainment purposes only.
We have found in the world of pressure washing concrete, water volume (gpm / gallons per minutes) is just as important of as water pressure
In vacuum systems, performance inches of lift or inches of mercury (HG) is just as important as cubic feet per minute.
Heating BTU are important when laying on the cleaning trigger for high volume cleaning as in concrete cleaning, tile and grout, and dual operator wanding.
1 Hp engine produces average of 3920 BTU (base line 730cc / 25 hp engine)
each cc of displacement produces average of 134.26 BTU
Vacuum Blower produce 89 BTU per cfm
Engine coolant and Oil to water coolers produce and average 50,000 BTU each
Also electric 2000 watt in line heaters offer about 9166 BTU of heat
Truck Mount Comparison Chart (in random order)
||Water Pump Performance (GPM X Max Pressure = Cleaning Unit Speed)
||Vacuum Bower Size (Cfm X Inches of Lift = Vacuum Units)
||Heating Type and BTU output
||Performance Score Value Totals (Cleaning Units + Vacuum Units + BTU = ? Divided by Price = Value per Dollar Spent.
|Sapphire Scientific 2500HS Multi-Surface
|| 35 hp
|| 2500 psi X 5.6 gpm = 14,000 Cleaning Unit Speed Cold
|| Denver Ti406 371 X 14”HG / 190” lift = 70,490 Theoretical Vacuum Units But at Engine 3000 rpm = 263.83 cfm X 14" Hg / 190" Lift = 50,128 Vacuum Units
| Heat exchanger: engine exhaust 137,200 + and oil 50,000, + 33,019 blower = 220,219 BTU
||$23,597 (trailer, fresh water tank, reels, tools not included)
||284,347 performance / 12.05 performance per dollar spent
|Sapphire Scientific 460SS
|| 35 hp
|| 1500 psi X 5 gpm 7500 Cleaning Unit Speed Cold
|| Denver Ti408 455 CFM X 14” HG / 190” Lift = 86,450 Vacuum Units
Theoretical Vacuum Units But at 3040 RPM = 397.35 CFM X 14 Hg / 190" Lift = 75,497 Vacuum Units
| Heat exchanger: Engine exhaust 137,200 + Blower 40,495 + Oil 50,000 = 227,695
| $23,391 (Trailer, fresh water tank, reels, tools not included)
||310,692 performance points divided by $23,391 = 13.28 performance per dollar spent.
| HydraMaster Boxxer XL
|| 31 Hp
|| 1200 psi X 4 Gpm = 4,800 Cleaning Units Speed Cold
|| Tuthill 4007 400 CFM 14” HG / 190” Lift = 76,000 Vacuum Units
||Heat exchanger: Engine 121,520 BTU + Vacuum 35,600 = 157,120 BTU
| $21,669 Machine only
||237,920 performance points divided by $21,669 = 10.98 in performance per dollar spent.
| MasterBlend El Diablo 300017 Truck Mount
|| 27 Hp
|| 2000 psi @ 4.2 gpm 8,400 Cleaning Unit Speed Cold
| Roots 45 400 cfm @ 14” HG / 190” Lift = 76,000 Vacuum Units
|| 195,000 BTU Diesel Heater
|| $18,756 (trailer, fresh tank not included)
||279,400 Performance Divided $18,756 = 14.90 performance per dollar spent.
| Clean Storm TM35-425
|| 35 Hp
|| 4000 psi X 5 gpm = 20,000 Cleaning Units Speed Cold
|| Denver 4MR 425 CFM @ 14" Hg / 190" Lift = 80,750
|| 350,000 BTU Diesel Heater
|| $19,999 All inclusive with trailer, tanks, reels, hoses, tools
||450,750 Performance divided by $19,999 = 22.54 performance per dollar spent.
| Blue Baron 47XL Truck Mount
|| 32.5 Hp
|| 2500 psi X 3.5 gpm = 8750 Cleaning Units Speed Cold
(heat exchanger safety valve set at 2000 psi or 7000 Cleaning units)
|Denver 4LR 560 cfm / 190" lift = 106,400 Vacuum units
|| Engine Heat Exchanger 127,400 BTU
||$17,895 Package price with reel and hoses and wand. (trailer, fresh tank, not included)
Machine only value $15,895
|240,800 Performance divided by $17,895 = 13.46 in performance per dollar spent.
| Prochem Everest HP408
|| 54 Hp
|| 3000 psi X 5.5 gpm = 16,500 Cleaning Units Speed Cold
|| Ti408 455 cfm X 190" Lift = 86,450 Vacuum Units
|| Engine Exhaust 211,680, Radiator 50,000, Vacuum Blower 40,495 = 302,175 BTU
|| $29,929 (trailer, fresh tank, reels, not included)
||405,125 performance points divided by $29,929 = 13.53 per dollar spent.
| Sapphire Scientific 72-370 SS
|| 640cc /20 Hp Kohler
|| 1500 psi X 3.4 Gpm = 5,100 Cleaning Units Speed Cold
|| Ti406 317 cfm X 190" lift = 60,230 Vacuum Units
|| Engine Exhaust 78,400 BTU, Vacuum Blower, 28,213 = 106,613
|| $19,136 (Trailer, fresh tanks, reels, tools not included)
||171,943 performance / 8.99 performance per dollar spent.
| SteamBrite TM33-340
|| 33 Hp
|| 4000 psi X 4.8 gpm = 19,200 Cleaning Units Speed Cold
||Quad 6.6 Vacuum 340 cfm X 15.8” Hg / 215” Lift = 73,100 Vacuum Units
||300,000 BTU Diesel Heater
|| $14,999 Complete - Self Assembly
|392,300 performance / 26.16 performance points per dollar spent self assemble OR 21.56 assembled per dollar.
4 Hose reels included with all the hoses!
| SteamBrite TM31-340
|| 31 Hp
|| 3000 psi X 5 gpm = 15,000 Cleaning Units Speed Cold
|| Quad 6.6 Vacuum 340 cfm X 15.8” Hg / 215” Lift = 73,100 Vacuum Units
||300,000 BTU Diesel Heater
|| $14,200 Complete Self Assembly or
$17,400 Assembled (all inclusive)
|388,100 performance / 27.33 points per dollar spent - self assemble OR 22.30 assembled. (4 hose reels, hoses, wand, trailer, fresh tank all included!)
| Blue Baron Compact 36
|| 23.5 Hp
|| 2000 psi X 3.5 gpm = 7000 Cleaning Units Speed Cold
|| Denver 3LR Blower
370 cfm X 14" Hg / 190" Water Lift = 70,300 Vacuum Units
| 92,120 BTU Diesel Heater
|| $12,494 Machine with hoses / Wand
||169,420 performance / 13.56 performance per dollar spent.
| SteamBrite TM28-340
|| 28 Hp
|| 4000 psi X 4 gpm = 16,000 Cleaning Units Speed Cold
|| Quad 6.6 Vacuum 340 cfm X 15.8” Hg / 215” Lift = 73,100 Vacuum Units
|| 350,000 BTU Diesel Heater
|| $13,734 Self Assembly or $16,934 Assembled
||439,100 performance / 31.97 performance per dollar spent self assemble OR 25.93 assembled (FREE 4 hose reels, trailer, fresh tank, complete and the number is HUGE.)
| Prochem Peak GTX2
|| 680cc / 26 hp
|| 1200 psi X 3.7 Gpm = 4,440 Cleaning Unit Speed Cold
|| Blower Ti406 @ 3350 RPM (3350 RPM) = 304.3 CFM @ 14 Hg/ 190" Water Lift = 57,817 Vacuum Units
| Engine Exhaust 98,010 BTU + Blower BTU 27,082.7 = 125,092 BTU
||$21,150 with 100 ft hose set and wand
||187,349 performance / 8.86 performance per dollar spent.
| HydraMaster 318HP
|| 18 Hp Briggs
|| 1500 psi X 3.5 Gpm = 5250 Cleaning Unit Speed Cold
|| Tuthill 3006 Blower 300 cfm @ 14 Hg / 190" Water Lift = 57,000 Vacuum units
||Engine Exhaust 70,567.2 + Blower Exhaust 26,700 BTU= 97,267 BTU
||159,517 performance / 11.00 performance per dollar spent.
| HydraMaster Boxxer XL
|| 31 Hp Briggs
|| 1200 psi X 4 Gpm = 4800 Cleaning Unit Speed Cold
|| Tuthill 4007 Blower 400 cfm X 14 Hg / 190" Water Lift = 76,000 Vacuum units (Theoretical) /Factory setting on Vac Release 12 Hg /163" or 65,200 Vacuum Units
||Engine Exhaust 121,520 BTU + Blower 35,600 BTU = 157,120 BTU
|| 227,120 performance / 10.83 performance per dollar spent.
| Prochem Legend GT
|| 670cc / 25 Hp
|| 1200 psi X 3.5 Gpm = 4200 Cleaning Unit Speed Cold
|| Denver 4MVL 330 CFM X 14 Hg / 190" Water Lift = 62,700 Vacuum Units
|| Engine Exhaust 89,954 BTU + Blower 29,370 BTU = 119,324 BTU
||$14,500 Machine with 100 ft hose and wand
||186,224 performance / 8.23 performance per dollar spent.
||Electric / Can be operated on 420cc Generator of Electric Clothes Drier Plug
||1000 psi X 2.2 Gpm = 2200 Cleaning Unit Cold
||260 CFM X 16.5" HG /230" Water Lift = 59,800 Vacuum Units
||No heater included but optional
||62,000 Performance / 12.4 performance per dollar spent
| Goliath Complete Heat Portable
|| 3 Power Cords
|| 500 psi X .72 Gpm = 360 Cleaning Units Cold
|| 250 CFM X 12.5" HG / 170" Water Lift = 42,500 Vacuum Units
|| 14,000 BTU Heat Exchanger + 8020 BTU Electric = 22,020 BTU
||64,880 Performance / 14.61 performance per dollar spent
We naturally will a little investigating you can look up any branded truck mount or portable and do your own calculations.
Some machines or customer might never be used for concrete cleaning, dual operator, tile cleaning, or other high pressure, high flow needs so the water pump cleaning speed might not play a factor, but as more buildings and homes transition to these surface types we feel it is an important factor in the purchase decision.
Some factories might offer larger surface areas in their heat exchangers, this too could play a factor in performance.
We have found in side by side performance start time to end temperature delivery time is enormously different between heat exchange systems verses diesel burner systems. Diesel heating systems reach top end temperatures in 60 seconds while heat exchange system can take a full 15+ minutes.
Heat exchange system cost less to operate as they only burn one fuel for both cleaning and heating.
Some examples are machine only, others include the hoses and wand, others include even reels, fresh water tanks, and even free trailers so it makes it hard to actually place all packages on the same paying field.
Elevation plays a factor too which changes the air density and performance of vacuum and heating systems.
Theoretical vacuum units might differ from actual vacuum units based on engine revolutions per minute and waste tank vacuum release system. As I was reading through the owners manuals of the different machines, I found that some factories state they set the vacuum release as low as 12 Hg / 163" of water lift while others will not post actual RPM so we have now way of knowing actual cubic feet per minute open air flow. We also found different charts that compared the inches of mercury to inches of water lift.
We also see it is common practice for a factories to post water pump theoretical max specifications instead of how the machine performs based on rpm of the pump/machine in combination with max 'use' pressure of the heat exchanger, pressure regulator, and or safety pop off valve. Please note this is done on purpose, not the trick the consumer, rather to ensure the pump is working with ease. For example how long would a car last that had a top end speed of 140 mph, and all you do is drive it on the race track at 140 mph compared to the same car driving on the highway at 70 mph? Having a 2 to 1 service factor ratio ensure longevity of the design. In the chart above, should we post theoretical performance showing longevity or actual performance? It is possible to have one truck mount to have theoretical performance specifications posted while the next design is actual based on how the owners manual reads. This further complicates the comparison chart.
If you have a truck mount model you want added to the above chart, please email us, and we will do our best to added and then email you back once complete.
Highest performing truck mount system: SteamBrite TM35-425 with a massive 450,750 total performance!
Best Value per dollar spent: TM28-340 self assemble 31.97 in truck mount performance per dollar spent / 25.93 assembled ready to ship with 4 hose reels, hoses, free trailer, fresh water tank!
Heat Exchanger Only systems winner: Blue Barron 47XL 13.46 performance per dollar spent.
We have found in portable performance specs many, many factories fudge the truth about their inches of lift, cfm, and heat. We have to tread carefully as sometime posting the truth causes factories to pull our distributorship, or cause customers to wander, "Why are both the specs, and prices less on SteamBrite? They must have a cheaper, lower performing machines being built for them." This was causing customer to purchase off other websites. This is not the case, as our machine are coming off the same assembly lines as everybody else's. We now post whatever the factory states to post where it is the truth or not. Customer that spend time in our forums soon learn how to see through these posted errors as we provide the science of how true inches of lift, max hose length, water temperature performance can truly be calculated. Please email us if you find a mistake so we can post the correct information.