Tucker ULTIMATE Residential Kit w/ Rival V-2, Hose Reel, ECO-40 and Junior Water Fed Poles, and Assorted Brushes/Accessories

Description

Do you love our Ultimate Residential Kit, but wish it came with a Tucker® 40 instead of the Tucker® 30? This has been a frequently asked request and now we have a kit that includes our Tucker® 40. This is the perfect setup for anyone looking to get serious about residential window cleaning. This upgraded entry-level kit is designed for those looking for more water flow for faster rinsing in all water conditions. Like all of our RO/DI systems, this system includes your first set of pre-filter and post-filters FREE of charge so you're not left stranded on the job when your first filters go bad.

 

 

Bundle and Save BIG on this kit.  Purchased individually this values at over $4,000.

Looking for a kit like this made for commercial work? Check out our Ultimate Commercial Kit!

This bundle includes our:

Tucker® Multi-Stage RO/DI Mobile Cart - RIVAL-V2

The Tucker® Hose Reel w/ 150' of hose

The Tucker® ECO-40 Pole - BARE

The Tucker® Junior Pole - BARE

The Tucker® Standard Size Boar Hair Water Fed Brush with 4 Pencil Jets

The Tucker® Standard Size Hybrid Water Fed Brush with 2 Pencil Jets

The Tucker® Standard Size GLIDE Water Fed Brush with 4 Pencil Jets

The Tucker® Standard Size Over The Top Rinse Bar

The Tucker® Standard Size Alpha Scrubber

The Tucker® Mini Scrubber

A Male & Female Quick Connect For Pole Hose And Garden Hose

The Tucker® Reach Around Gooseneck w/ Quick Release For #1 Clamp

The Tucker® Swiveling Gooseneck w/ Quick Release For #1 Clamp

100' Of 5/16" OD Tucker® Pole Hose

An Inline Ball Valve for 5/16" OD Tucker® Pole Hose

An ACME Tip For #1 Clamp

A Wood Cone Tip for ACME Tip

The Tucker® RIVAL - V2 RO/DI System
All new for 2025!  After 4,000 units we have upgraded the system - AGAIN!

RIVAL-V2 by Tucker® Stainless Steel 4-Stage RO/DI System - MADE IN USA

The RIVAL Cart is a 4-stage Pure Water system that comes on a powder coated lightweight steel frame made for years of abuse. The new Tucker® combination sediment/carbon pre-filter makes this a 4-stage filtration system! Large flat free tires help you navigate all terrains.

New features on the Rival-V2 include:
DI Saver System: Avoid TDS creep and lower your cost per gallon instantly with the Tucker® DI Saver System.  Simply turn the 3 way valve to the RO position and you will bypass your DI filter.  This is great for anyone wanting RO only water, those looking to test RO production simply, and those looking to bleed off high TDS water before sending it to the DI filter - saving you big money on your DI resin.  See video below for details!

New 40" Max-Flow membrane w/Variable Flow Technology.  This new membrane provides the highest flow rates regardless of your incoming pressure.  From 40 to 120 PSI inlet pressure you will see the highest flow.  So whether you're using a booster pump or not you will have optimal flow at your pressure.  This means no more guessing which RO is best for you!  See video below for details.

Large flat-free tires help you navigate all terrains.

System consists of:

• • (1) Carbon pre-filter for removal of harsh chlorine, chloramine, and sediment.
• • (1) Tucker® MAX-Flow RO membrane.
• • (1) Refillable DI Filter for an ultra-pure final polish of your pure water.

Rival Series 4-Stage RO/DI Cart - User Manual

Tucker® 150' Hose Reel w/ premium pure water hose
New hose reel from Tucker®. The Highest quality hand carry hose reel on the market today. Made of powder coated laser cut steel and machined aluminum.

Assembled in the USA. Comes complete with 150' of 3/8" premium hose line. 3/4" Brass garden hose inlet. 3/4" Brass garden hose outlet.

Tucker® ECO-40 Pole - Bare
Made from 100% high-grade carbon fiber, this water fed pole can extend to a height of 36’ (brush to cap). These poles are perfect for ground level up to 3rd floor residential work. Carbon fiber gives this pole a superior rigidity while maintaining an amazingly light weight.


Tucker® Junior Pole - Bare
The Tucker®-JUNIOR Water Fed Pole is a 3 section ground-level pole designed to reach windows up to 15 feet in height. Made from a blend of standard modulus carbon fiber and fiberglass, this pole still maintains a good rigid frame at an ultra low cost. The Tucker®-JUNIOR collapses to a height of 52 inches, and weighs in at only 2 pounds, even with a window cleaning brush attached.

Tucker® Standard Size Boar Hair Water Fed Brush with 4 Pencil Jets
Designed for experienced window washers, this American made water fed brush is made from natural boar bristles for a superior clean. The natural fibers of the boar bristle clean and scrub regardless of their orientation. This allows the seasoned professional to clean into corners and crevices by splaying the fibers of the brush out and utilizing the entire surface of the boar bristles. This brush comes with 4 separately plumbed pencil jets, creating direct streams of high-pressure water that powers away grime. Pencil jets are perfect for situations where a deeper level of cleaning is needed, and a higher water pressure is desired directly on the glass to minimize physical strain by the operator.


Tucker® Standard Size Hybrid Water Fed Brush with 2 Pencil Jets
Our dual trim, hybrid water fed brushes are the ultimate glass cleaning brush for solar panel and window cleaning businesses. This hybrid, dual trim brush has bristles that are longer on the outer edge of the brush, allowing the operator to splay the bristles into corners and sides of the glass. The shorter, inner bristles remain upright and allow the tip of the bristle fiber to continue scrubbing directly on inner surface of the glass. This brush comes with 2 individually plumbed pencil jets, which help direct a high-pressure stream of water that assists the brush operator by blasting away stubborn dirt.

 
Tucker® Standard Size GLIDE Water Fed Brush with 4 Pencil Jets

Designed for experienced and new window washers alike, this American made water fed brush is made from a new synthetic material that out performs boar bristle in our testing. Whereas boar bristle brushes will shed, these brushes will last far longer. Due to the nature of the bristle material you are able to get the boar bristle aggressive scrub, but also rinse on the glass in far more scenarios. The bristles will not hold dirt like boar bristle brushes so you will fine these more forgiving for new comers in training or just getting started.
This brush comes with 4 plumbed pencil jets, creating direct streams of high-pressure water that powers away grime. Pencil jets have long been the standard jet when rinsing glass.

Tucker® Standard Size Over The Top Rinse Bar 
The Tucker® Over the Top Rinse Bar is made of high quality lightweight plastic and guaranteed to perform the way it should from day one. The water flow covers the entire width of the brush. Easily attaches to any of the USA Made Tucker® brushes. *Not designed for other brand brushes.

 

Tucker® Standard Size Alpha Scrubber 
The Tucker® Alpha Scrubber is the ultimate commercial grade polyester scrubbing pad for jobs requiring heavy cleaning to remove dried, caked on dirt and grime from any window.  

 

The Alpha Scrubber is unique in that it does not have traditional brush bristles and uses a thick scrubbing pad that traps dirt particles and pulls them away from the glass. The over the top rinse bar pours a cascade of water over the top of the brush allowing the water to fan over the glass and quickly rinse any debris from the cleaning area. This allows a fast rinse with minimal effort, saving your body from premature fatigue. The brush includes our proprietary swiveling gooseneck, which allows you to slide the brush across the glass without taking it away from the glass.

This kit also comes with 10 replacement pads, giving it a long-life span before needing replacements. This scrubber is about ease of use, and we think we knocked it out of the park! We also offer replacement cleaning pads and velcro to keep your investment functioning for a lifetime.


Tucker® Mini Scrubber

This Mini Scrubber from Tucker® is made to thread onto the male acme tip of our plastic adjustable Reach Around Goosenecks. This is an excellent solution for bird and bee droppings, caked on dust, and other tough jobs. Comes with one replacement 4.5" wide pad. Extra walnut scrub pads for this scrubber are available HERE.


Male & Female Quick Connect For Pole Hose And Garden Hose
Male and female quick connect with shutoff valve to attach 5/16 inch pole tubing directly to water system outlet or hose reel. The anodized aluminum male quick connect have a PTF replaceable union fitting built in. The female quick connect uses garden hose threads simply thread onto the end of your garden hose fitting.


Tucker® Reach Around Gooseneck w/ Quick Release For #1 Clamp
The Tucker® Reach Around Gooseneck is designed to fit onto the tip of your Tucker® water fed pole. This design uses a quick release stem that attaches to the #1 clamp of your Tucker® pole for easy adjustment. This attachment accepts Tucker® brushes threaded onto the euro male thread and standard ACME threaded accessories which can be attached via the ACME male thread.

 

 

Tucker® Swiveling Gooseneck w/ Quick Release For #1 Clamp
The Tucker® swiveling gooseneck is a must have for any professional looking to tackle odd angles with their water fed pole. The swivel moves from side to side and can easily be adjusted to make the swivel action loose or rigid, depending on the operators preference. This design uses a quick release stem that attaches to the #1 clamp of your Tucker® pole for easy adjustment. Made in USA of strong plastic material, these goosenecks are proven to last.

 

100' Of 5/16" OD Tucker® Pole Hose
Looking for a pole hose that doesn't kink or puncture easily? This is the absolute best pole hose you can buy. Hundreds of thousands of feet of this product have been sold. Outside diameter is 5/16" meaning it fits the push to fit style tee fittings on all the euro pole brushes, not just Tucker®. 

 

Inline Ball Valve for 5/16" OD Tucker® Pole Hose

Small inline ball valve for 5/16" OD pole hose tubing. Simply cut your line where you would like to install the valve and push the valve to fit into place. NEW and IMPROVED design!


ACME Tip For #1 Clamp
Tired of plastic ACME tips breaking under pressure? The all new Aluminum Tucker® ACME tip is designed to fit into the top of the new Tucker® T1 clamp on all Tucker® carbon fiber water fed poles.

Simply add this to the tip of your pole by inserting it into the new Tucker® T1 clamp and you have affectively converted your water fed pole into a trad pole.


Wood Cone Tip for ACME Tip
This wood cone tip is the ideal solution for attaching squeegees, mops, etc. to your pole.


All RHG and Tucker® brand purification systems, pole sections, and clamps come with a 2 year warranty and are assembled in the US.