Clean Storm 156893, 30-Gallon Heavy Duty Polyethylene Square-Ended Sprayer Tank, 3/4in FNPT Outlet

Description

The Clean Storm 156893 is a 30-gallon heavy-duty square-ended polyethylene sprayer tank designed for secure containment and easy liquid transfer across agricultural, commercial cleaning, and industrial applications. Molded from high-density polyethylene (HDPE) integrated with premium ultraviolet (UV) inhibitors, this rugged reservoir offers exceptional chemical resistance and long-term durability in harsh outdoor environments. Key structural enhancements include structural side-ribbing, built-in support legs, high-visibility molded gallon graduation indicators, and dual flat-end faces designed to accommodate jet or mechanical agitation systems. Outfitted with a generous 5-inch fillwell, 5-inch vented vacuum break cover, and a standard 3/4-inch threaded outlet fitting, the Clean Storm 156893 ensures fast filling, reliable fluid delivery, and seamless integration into sprayer skid setups.

Features

• Heavy-Duty Polyethylene Construction: Molded out of industrial-grade polyethylene to resist impact, cracking, and a wide array of chemicals, fertilizers, and cleaning agents.
• UV-Inhibited Protection: Integrated ultraviolet inhibitors prevent premature plastic degradation and embrittlement caused by prolonged sunlight exposure.
• Enhanced Structural Integrity: Engineered with deep side ribbing and built-in support legs for maximum stability during transport and heavy liquid storage.
• Optimized Fillwell & Venting: Features a large 5-inch molded-in fillwell paired with a 5-inch vacuum break vented cap for effortless filling and fluid venting without air-locks.
• Agitation-Ready Flat Ends: Precision flat spot molded into each end wall allows clean installation of mechanical or hydraulic jet agitation kits.
• Dual Fluid Level Markings: Molded-in gallon indicators on both the side and end walls provide quick visual inspection of remaining tank volume.
• Standard Threaded Outlet: Equipped with a 3/4-inch FNPT outlet fitting for simple plumbing to agricultural pumps, hose reels, or bypass loops.
• American Manufacturing: Proudly manufactured in the U.S.A. following rigorous quality control and material standards.

Applications

• Agricultural & Pest Control Sprayers: Ideal primary reservoir for field crop spraying, lawn chemical application, herbicide spraying, and pest control rigs.
• Pressure Washing & Soft Wash Rigs: Performs reliably as a bleach/surfactant supply tank or water buffer tank on soft wash and pressure cleaning trailers.
• Carpet Cleaning & Restoration: Fits truckmount and portable carpet extraction setups requiring compact, heavy-duty freshwater or chemical holding tanks.
• De-Icing & Dust Control Systems: Suitable for liquid brine storage and spraying systems mounted on utility vehicles and skid rigs.
• Industrial Fluid Management: Compatible with non-flammable liquid transfer systems, process water supply lines, and wash-down stations.

Specifications

Cross-Reference SKUs

Tips and Additional Information

Thread Sealing & Plumbing Installation: When plumbing to the 3/4-inch threaded outlet fitting, use liquid Teflon thread sealant or heavy-duty PTFE thread tape. Over-tightening plastic fittings with metal pipes can cause stress fractures in the tank wall; hand-tighten fittings plus 1 to 1.5 turns with a wrench. Ensure adequate hose flexibility near the outlet to prevent strain caused by operational vibration or frame flexing.

Agitation Kit Installation: The flat spots on either end of the tank are designed to provide a flush seal surface for bulkhead fittings. When drilling for jet agitation nozzles or shaft seals, use a clean hole saw matching your bulkhead specifications and thoroughly flush out plastic shavings before initial tank operation.

Pre-Operation & Fluid Compatibility Inspection: Inspect all fittings, caps, and mounting straps prior to full fluid loading. Ensure the chemical solutions used are fully compatible with polyethylene. Do not store gasoline, diesel, flammable hydrocarbons, or concentrated organic solvents inside polyethylene sprayer tanks unless explicitly rated by chemical compatibility guides.

Frequently Asked Questions

Q: What are the exact outer dimensions of the Clean Storm 156893 tank?
A: The tank measures approximately 25 inches in length, 19 inches in width, and 20 inches in height. Always allow additional clearance around the 5-inch fillwell cover and the 3/4-inch bottom outlet for hose routing and cap removal.

Q: Is this tank safe for storing flammable fuels or gasoline?
A: No. Polyethylene sprayer tanks of this specification are intended strictly for non-flammable fluids, water, liquid fertilizers, pesticides, soft wash chemical mixes, and non-volatile solutions. Never use this tank for gasoline, kerosene, or volatile fuels.

Q: Can I install a jet agitator on this tank?
A: Yes. The tank features a dedicated flat surface on each square end wall specifically designed to accept mechanical agitator assemblies or hydraulic jet agitation bulkheads.

Q: How does the vacuum break cover work?
A: The included 5-inch vacuum break cap vents air in and out during pump drawdown and filling operations. This prevents vacuum collapse inside the tank as liquid is evacuated and eliminates pressure buildup from fluid heating.

Warranty & Safety Information

Warranty Coverage: Clean Storm products are backed by a standard manufacturer warranty covering defects in materials and workmanship under normal industrial and commercial operating conditions. Proof of purchase is required for warranty claims.

Conditions That Void Warranty & Safety Warnings:
• Exceeding maximum structural temperatures or storing incompatible corrosive solvents or fuels.
• Pressurizing the tank body (this tank is designed for gravity-feed/suction applications only; pressurized air or fluid operation is strictly prohibited and presents severe risk of structural bursting).
• Improper mounting or failing to use full-bottom structural support straps during mobile transport.
• Over-tightening plumbing fittings or drilling unauthorized mounting holes directly through fluid-retaining walls.
• Transporting un-baffled fluid tanks on highway vehicles without proper frame securement.