Clean Storm 200700040, Heavy Duty 2in ID x 8ft Double Lined Vacuum Jumper Hose Assembly for Ermator C3000 Pre-Separator

Description

The Clean Storm 200700040 is a high-performance 2.0-inch ID by 8-foot double-lined vacuum jumper hose assembly featuring factory-installed cuffs designed for severe-duty dust extraction and concrete grinding applications. Engineered with a super-smooth interior wall, this hose optimizes air velocity and cubic feet per minute (CFM) air movement to maximize pre-separator efficiency while preventing clogging. It seamlessly bridges dust extractors and pre-separators such as the Ermator C3000 to extend equipment life and maintain peak filtration performance.

Features

• Double-lined heavy-duty construction provides superior crush resistance and long-lasting durability in demanding commercial environments.
• Super-smooth interior bore reduces friction loss, maintaining optimal airflow and preventing debris buildup during heavy dust collection.
• Factory-fitted 2.0-inch interior diameter (ID) end cuffs deliver secure, leak-free connections to dust extractors, pre-separators, and accessories.
• Enhances dust separation efficiency on pre-separator setups, capturing fine concrete dust and debris before reaching main extractor filters.
• 8-foot jumper length provides ideal bridge distance without excess hose sag or unwanted vacuum pressure drops.

Applications

• Designed specifically as a direct jumper hose for the Ermator C3000 Pre-Separator system.
• Compatible with Husqvarna, Pullman Ermator, Hydro-Tek, Mytee, and custom commercial dust extraction setups.
• Ideal for concrete grinding, surface preparation, masonry restoration, and high-volume dry dust capture.
• Suitable for commercial carpet extractors, truckmount vacuum line jumpers, and industrial shop vacuum systems requiring 2-inch ID connections.

Specifications

Included

Clean Storm AH44 Vacuum hose Cuff 2in Thread X 2.0in Slip - 2in Standard 8.708-904.0 B016 J11630 530009

Cross-Reference SKUs

Tips and Additional Information

Proper installation and care ensure maximum vacuum performance and long service life. Prior to attachment, inspect both end cuffs for grit or debris to guarantee a snug seal onto the pre-separator inlet and dust extractor ports. When connecting to 2-inch ports, thread or push the cuffs firmly into place; if tight, apply a small amount of silicon-based lubricant to the port exterior for easier engagement. Inspect hose lines daily for deep punctures or kinks that could compromise suction efficiency. Ensure the jumper hose is positioned with gradual bends rather than tight 90-degree kinks to preserve the smooth-wall airflow dynamic during heavy concrete grinding or extraction runs.

Frequently Asked Questions

Q: Is this jumper hose guaranteed to come in blue?
A: While the hose is typically supplied in blue, exact color shades or colors may vary slightly based on raw material batching and manufacturing production runs without affecting technical performance.

Q: Will this hose fit directly onto an Ermator C3000 pre-separator?
A: Yes, this 2.0-inch ID double-lined assembly is built to connect directly between the Ermator C3000 pre-separator and your primary dust extractor machine.

Q: What are the main benefits of a double-lined smooth interior vacuum hose?
A: The double-lined design provides crush resistance on harsh job sites, while the smooth inner lining reduces turbulent air drag, enabling higher static lift and airflow volume needed for fine dust separation.

Q: Can I use this assembly with carpet extractors or truckmount units?
A: Absolutely. Any vacuum machine using standard 2-inch barb or sleeve cuff connections can utilize this jumper hose assembly for extended reach or machine bridging.

Warranty & Safety Information

This product carries a standard 90-day manufacturer defect warranty covering defects in material quality and cuff bond integrity under normal operating parameters. Warranty coverage is voided under conditions including, but not limited to: running hot liquid or corrosive acids incompatible with hose construction, exceeding thermal thresholds, run-over crush damage from heavy machinery or vehicle tires, improper forced fitment onto non-standard 2-inch fittings, or structural modifications to the factory-installed cuffs. Always verify equipment grounding when extracting potentially static-generating fine powders or concrete slurry to prevent electrical shock or static buildup hazards.

Optional

Clean Storm 20141014 Joiner Coupler 2in OD Slip X 2in OD Slip White Plastic Vacuum Hose Connector

Clean Storm AH76 2IN Barbed X2IN Barbed Plastic Hose Insert Joiner Fitting Truck Mount Vac Hose Connector GTIN 796916032494