

Clean Storm 20141014, Carpet Cleaning Vacuum Hose Joiner Coupler 2 Inch OD Slip x 2 Inch OD Slip White PVC
Description
The Clean Storm 20141014 is a heavy-duty 2 inch OD slip by 2 inch OD slip white PVC vacuum hose joiner coupler engineered to securely link commercial carpet cleaning vacuum hoses without air leaks. Measuring 4.5 inches in total length, this rigid internal pipe connector creates a firm, airtight seal inside standard 2 inch ID vacuum hose cuffs. By eliminating loose connections, it prevents costly CFM vacuum loss during extraction jobs while stopping flexible vinyl hose cuffs from overstretching or tearing under high suction loads. Built from durable white PVC, this coupler performs reliably in cold weather environments where softer rubber or vinyl connectors can become brittle or lose grip, and it also serves effectively in plastic well point installations and general internal pipe joining applications.
Features
- Dual 2 Inch OD Slip Ends: Smooth outer diameter slip design inserts cleanly inside standard 2 inch inner diameter carpet cleaning vacuum hose cuffs for a snug, low-restriction fit.
- 4.5 Inch Extended Barrel Length: Provides generous insertion depth on both ends to resist accidental separation when dragging hoses across thresholds, stairs, and commercial hallways.
- Rigid White PVC Construction: High-impact, corrosion-proof polyvinyl chloride resists crushing, chemical exposure from extraction detergents, and deformation under heavy vacuum pressure.
- Prevents Vinyl Cuff Stretching: Internal rigid support maintains the round profile of soft vinyl hose cuffs, extending hose life and reducing vacuum suction loss.
- Cold-Weather Performance: Preferred joiner style for low-temperature and winter extraction conditions where standard flexible cuffs lose elasticity.
Applications
- Truckmount and high-CFM portable carpet cleaning extractor vacuum hose extensions
- Commercial flood restoration and water extraction dual-hose setups
- Replacing damaged or leaking vacuum hose joiners on 2 inch ID crushproof vacuum hoses
- Plastic well point drive coupling installations requiring an internal 2 inch OD slip splice
- General industrial vacuum systems, dust collection lines, and internal pipe connection assemblies
Specifications
| Brand |
Clean Storm |
| Part Number |
20141014 |
| Product Type |
Vacuum Hose Joiner Coupler and Internal Pipe Connector |
| Connection Type |
2 Inch OD Slip x 2 Inch OD Slip (Smooth Non-Threaded) |
| Overall Length |
4.5 Inches (4-1/2") |
| Material |
Rigid Polyvinyl Chloride (PVC) |
| Color and Finish |
Smooth White |
| Swivel Mechanics |
Non-Swivel Fixed Internal Coupler |
| Operating Temperature Range |
32°F to 140°F (0°C to 60°C) |
| Pressure Rating |
Designed for Non-Pressurized Vacuum Suction and Gravity Drain Lines |
Cross-Reference SKUs
| 20141014 |
| Clean Storm 20141014 |
| 224946534179 |
| CS-20141014 |
| CS20141014 |
Tips and Additional Information
Before installing the Clean Storm 20141014 joiner coupler, inspect the inside of both 2 inch vinyl hose cuffs for trapped debris, grit, or dried adhesive residue that could break the vacuum seal. Because this is a smooth, non-threaded slip fit connector, thread sealant or PTFE tape is not required for standard vacuum hose assembly. Push each hose cuff evenly onto the coupler until both cuffs meet near the center of the 4.5 inch barrel for balanced support. If working in freezing temperatures, warm stiff vinyl hose cuffs slightly before insertion to ease assembly without cracking the vinyl. Note that this is a non-swivel rigid joiner; avoid twisting hoses under heavy tension to prevent cuff separation. For permanent plumbing or plastic well point installations, clean and prime the PVC surfaces and apply appropriate PVC solvent cement according to local plumbing codes.
Frequently Asked Questions
Q: Does this 2 inch OD coupler fit inside a standard 2 inch carpet cleaning vacuum hose cuff?
Yes. Standard 2 inch carpet cleaning vacuum hose cuffs are sized to accept a 2 inch outer diameter (OD) male slip fitting. Both ends of the Clean Storm 20141014 measure 2 inches OD and slide directly inside standard 2 inch ID hose cuffs.
Q: Is this coupler threaded or does it rotate like a swivel cuff?
No. This is a smooth, non-threaded, non-swivel rigid PVC coupler designed to create a tight friction seal inside flexible hose cuffs.
Q: Why is a rigid PVC joiner preferred over soft vinyl joiners in colder climates?
Soft vinyl joiners can stiffen, shrink, or lose their grip in cold weather, causing hoses to pop apart or leak vacuum pressure. Rigid white PVC maintains its exact outer diameter and structural strength in low temperatures.
Q: Can I use this fitting for pressurized water lines on a truckmount?
No. This PVC slip coupler is engineered strictly for vacuum air suction lines and non-pressurized internal pipe joining, not high-pressure solution or hot water supply lines.
Warranty & Safety Information
The Clean Storm 20141014 PVC vacuum hose coupler is covered against manufacturing defects in material and workmanship under standard commercial cleaning and vacuum service conditions. Warranty coverage is void if the part is modified, exposed to temperatures exceeding 140°F, subjected to high-pressure liquid service, or damaged by incompatible harsh solvents. Do not use this fitting on pressurized air, steam, or high-pressure water lines, as sudden rupture or separation may cause personal injury or property damage. Always ensure vacuum hose cuffs are fully seated over the coupler before operating truckmount or portable extraction equipment to prevent sudden hose whip or suction hazards.
|