Clean Storm 20170228, Pro 4000 PSI Blue Solution Hose 1/4in ID Non-Marking Jacket, By The Foot, AH172

Description

Clean Storm 20170228 Pro 4000 PSI 1/4" ID Blue Solution Hose delivers heavy-duty pressure washer and carpet extraction performance with a non-marking jacket engineered for high-heat truckmount operations.

Features

• Engineered to be 25% tougher than standard commercial solution hoses on the market for extended service life.
• Single wire braid steel reinforcement provides maximum burst strength while maintaining exceptional hose flexibility.
• Tough, non-marking composite rubber/polymer cover protects sensitive indoor flooring and surfaces during operation.
• High-heat rated up to 250°F and maximum operational pressure rating of 4,000 PSI for demanding commercial applications.
• Resists concrete dragging wear, chemical exposure, and mechanical abrasion in heavy daily use.

Applications

• Commercial carpet extraction and tile/grout cleaning truckmount systems.
• High-pressure hot water solution feed lines and portable extractor rigs.
• Industrial pressure washing and high-temperature fluid transfer setups.
• Custom length hose assembly fabrication for carpet and hard surface cleaning technicians.

Specifications

Cross-Reference SKUs

Tips and Additional Information

This item is sold by the foot as raw bulk hose stock and does NOT come pre-crimped or pre-assembled with quick disconnect fittings. For standard quick disconnect setups, use Kingston brass quick disconnects (Part # NA0801 / NA0701) or Foster quick disconnect fittings (Part # FH2B / FK2B). When installing end fittings, ensure correct crimp dimensions and thread sealant (such as PTFE tape or high-pressure anaerobic thread sealant) are applied to male NPT threads to prevent high-pressure leaks. Inspect the hose jacket regularly for pinholes, deep outer scuffs, or wire braid exposure prior to daily high-temperature operation.

Frequently Asked Questions

Q: Does this bulk hose come with crimped male or female quick disconnects attached?
A: No. This product is raw hose sold by the foot (part number 20170228 / AH172). Crimp fittings and quick disconnect couplers/plugs must be purchased separately.

Q: Can this hose handle high-temperature truckmount cleaning systems?
A: Yes. The hose is rated for temperatures up to 250°F and pressures up to 4,000 PSI, making it fully compatible with commercial high-heat truckmount extractors.

Q: Will the blue outer jacket leave marks on lighter carpets or hardwood floors?
A: The hose features a durable non-marking composite outer cover specifically designed to avoid scuffing or scuff-marking interior floors, baseboards, and tile during cleaning operations.

Warranty & Safety Information

Clean Storm provides warranty coverage against manufacturing defects in materials and workmanship under standard operating conditions. Warranty coverage does not apply to failure resulting from exceeding the maximum rating of 4,000 PSI or 250°F, improper fitting crimping, physical puncture, chemical incompatibility, or mechanical crushing. Always wear protective eye and hand gear during high-pressure system installation and operation. Depressurize solution lines completely before attempting fitting replacement or disconnect service.