

Clean Storm 20170809 Dehumidifier Drip Tray - 20 Gallon Spill Containment Pan
Protect Customer Floors From Dehumidifier Water Leaks, Condensate Pump Overflows, and Accidental Spills.
The Clean Storm 20170809 Dehumidifier Drip Tray is a heavy-duty, 20-gallon capacity polyethylene containment pan designed to help protect floors and surrounding surfaces from accidental water discharge during professional water damage restoration and structural drying operations.
Commercial refrigeration dehumidifiers collect large amounts of moisture from the air. Although most restoration dehumidifiers include automatic condensate discharge pumps, water leaks can still occur because of clogged discharge hoses, pump failures, float switch problems, improper equipment handling, or residual condensation.
Positioning a containment tray underneath the dehumidifier provides an additional layer of protection against unexpected water discharge. This is especially important when restoration equipment is operating unattended in residential homes, commercial buildings, hotels, offices, and other occupied structures.
Clean Storm 20170809 Product Specifications
| Manufacturer |
Clean Storm |
| Part Number |
20170809 |
| Product Type |
Dehumidifier Drip Tray / Water Containment Pan |
| Capacity |
20 Gallons |
| Advertised Dimensions |
27" x 39" x 5.5" |
| Material |
Corrosion-Resistant Polyethylene |
| Bottom Design |
Ribbed Bottom |
| Storage |
Nestable Design for easy stacking |
| Primary Application |
Water Containment Under Restoration Dehumidifiers |
Features and Benefits
- 20-Gallon Containment Capacity: Provides substantial emergency water collection capacity if a dehumidifier condensate discharge system malfunctions.
- Corrosion-Resistant Polyethylene: Durable plastic construction will not rust like steel containment pans.
- Ribbed Bottom: Raised ribs help keep equipment elevated above small amounts of collected water.
- Nestable Design: Multiple trays can be stacked together for convenient storage and transportation in restoration service vehicles.
- Floor Protection: Helps contain accidental water discharge before it spreads across surrounding flooring.
- Professional Restoration Applications: Useful for water damage contractors, restoration companies, equipment rental businesses, and commercial drying operations.
Why Use a Drip Tray Under a Restoration Dehumidifier?
Even a properly functioning commercial dehumidifier can occasionally release water unexpectedly.
One frequently overlooked cause involves the automatic condensate pump and the cold evaporator coils inside the dehumidifier.
When a technician turns off a refrigeration dehumidifier, the evaporator coils may remain cold and continue releasing condensation into the collection reservoir.
If the condensate pump is purged and the machine is immediately unplugged, additional water can accumulate after the pump is no longer able to discharge it.
When the equipment is tilted onto its transport wheels, water remaining in the condensate reservoir may splash into the lower equipment housing.
After the dehumidifier is transported to another job site and placed back into operation, this trapped water may eventually drain onto the customer's floor.
Other possible causes of dehumidifier water leaks include:
- Clogged or kinked condensate discharge hoses
- Failed automatic condensate pumps
- Malfunctioning water-level float switches
- Cracked condensate collection reservoirs
- Loose internal drain connections
- Blocked condensate collection trays
- Improper equipment positioning
- Residual water remaining after equipment transportation
A properly sized drip tray can help contain water from these unexpected situations and reduce the possibility of additional damage to the customer's property.
Restoration Equipment Tip: Turn Dehumidifiers Off First and Load Them Last
One way to reduce residual water leaks is to change the order in which restoration equipment is removed from a completed job.
- Turn off the dehumidifiers first, while leaving their electrical power and condensate discharge hoses connected, when permitted by the manufacturer's operating instructions.
- Remove and load the air movers, floor drying systems, wall drying equipment, and other restoration accessories.
- Allow additional time for residual condensation to drain from the evaporator coils.
- Perform one final condensate pump purge according to the manufacturer's instructions.
- Disconnect the power cords and discharge hoses, then load the dehumidifiers last.
This procedure can reduce the amount of water remaining inside the condensate collection system during transportation.
Dehumidifier Leaking Water? Read Our Technical Forum Article
Steam-Brite explains why restoration dehumidifiers sometimes leak water even when their condensate pumps are operating correctly. Learn about common causes, transportation mistakes, condensate pump operation, and practical ways to prevent water leaks at restoration job sites.
Why Restoration Dehumidifiers Leak Water: Causes and Prevention
Free Restoration Equipment Troubleshooting Information - Opens in a new window.
Common Applications for the Clean Storm 20-Gallon Drip Tray
- Commercial LGR dehumidifier water containment
- Refrigeration dehumidifier condensate overflow protection
- Water damage restoration job sites
- Flood restoration and structural drying projects
- Restoration equipment rental applications
- Commercial building drying operations
- Temporary water containment beneath compatible equipment
- General-purpose spill containment applications
Important Equipment Placement Considerations
Before placing a dehumidifier inside the containment tray, verify that the equipment footprint fits within the usable interior dimensions of the pan.
The dehumidifier should remain stable and level. Do not obstruct equipment air intakes, exhaust outlets, condensate discharge hoses, or electrical connections.
If water accumulates inside the containment tray, identify and correct the source of the leak. The tray is intended as secondary containment and does not replace normal condensate drainage, equipment maintenance, or job-site inspections.
Note: The 20-gallon capacity represents the advertised containment capacity of the tray. Actual available water capacity will be reduced by the displacement of equipment placed inside the pan.
Clean Storm 20170809 - Professional Dehumidifier Floor Protection
For restoration contractors who operate commercial dehumidifiers on customer property, the Clean Storm 20170809 drip tray provides a practical additional safeguard against unexpected condensate discharge.
Its corrosion-resistant polyethylene construction, 20-gallon capacity, ribbed bottom, and nestable design make it a useful accessory for professional water damage restoration equipment.
Manufacturer: Clean Storm
Part Number: 20170809
Product: 20-Gallon Dehumidifier Drip Tray
Important: Order by part number, not image. Manufacturer reserves the right to change product specifications, dimensions, design, or color without notice.
|