

Clean Storm 20200207, PVC 90° Elbow White 2 in FIP x 2 in FIP Pipe Fitting
Description
The Clean Storm 20200207 PVC 90° Elbow features 2 in FIP x 2 in FIP female thread connections, engineered for reliable 90-degree fluid directional changes in industrial water treatment, carpet extraction systems, truckmount recovery tanks, and liquid transfer lines.
Features
- Heavy-Duty Rigid PVC Construction: Precision-molded white polyvinyl chloride offers superior resistance to chemical corrosion, mild acids, and industrial cleaning solutions.
- Precision Female Threading: Dual 2-inch Female Iron Pipe (FIP / NPT female) threaded connections ensure a tight, dependable seal with male pipe ends.
- Smooth Internal Flow Path: 90-degree elbow design minimizes flow restriction and turbulence in liquid transfer lines and extraction systems.
- Non-Corrosive & Light: Lightweight structural design eliminates rust and scale buildup common in metallic fittings.
- Versatile Pressure Rating: Designed for reliable performance in low-to-medium pressure plumbing and equipment recovery networks.
Applications
- Carpet extractors and commercial truckmount cleaning systems.
- Industrial liquid transfer, wastewater management, and drainage lines.
- Water treatment, filtration skid piping, and chemical dosing assemblies.
- HVAC condensate drain systems and vacuum recovery lines.
- Aquaculture, pool, spa, and agricultural irrigation fluid distribution.
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20200207 |
| Fitting Type |
90° Elbow / Bend |
| Connection Type 1 |
2 in Female Iron Pipe (FIP / NPT Female) |
| Connection Type 2 |
2 in Female Iron Pipe (FIP / NPT Female) |
| Thread Type |
NPT / FIP Tapered National Pipe Thread |
| Primary Material |
White Polyvinyl Chloride (PVC) Schedule 40/80 Grade |
| Swivel Type |
Rigid (Non-Swivel / Stationary Installation) |
| Maximum Pressure Rating |
150 PSI at 73°F (23°C) |
| Operating Temperature Range |
32°F to 140°F (0°C to 60°C) |
| Color / Finish |
White |
Cross-Reference SKUs
| Clean Storm 20200207 |
| CS-20200207 |
| 20200207 |
| 2in PVC 90 Elbow FIP x FIP |
| PVC 90 deg 2in Female Threaded Elbow |
| 2 FIP PVC Elbow White |
Tips and Additional Information
Thread Sealing Best Practices: Apply PTFE (Teflon) tape or PVC-compatible thread sealant to male NPT threads prior to engagement. Hand-tighten the connection, then turn 1 to 2 turns past hand-tight with a pipe wrench. Avoid over-tightening, as tapered NPT threads can stress and crack plastic female ports.
Pre-Installation Inspection: Inspect internal and external threads for debris, flash, or damage before assembly. Ensure mating male threads match the 2-inch NPT/MIP specification.
Stationary Installation Only: This fitting is a rigid 90° elbow and does not contain swivel mechanics. Do not subject this fitting to continuous rotation or live twisting forces during operation.
Frequently Asked Questions
Q: What is the difference between FIP and NPT threads on this fitting?
A: FIP (Female Iron Pipe) uses standard NPT (National Pipe Taper) thread dimensions. This fitting accepts any standard 2-inch Male NPT / MIP threaded pipe or adapter.
Q: Is this fitting suitable for hot water carpet extraction truckmount lines?
A: PVC fittings are rated up to a maximum operating temperature of 140°F (60°C). For continuous high-temperature solution lines exceeding 140°F, brass or stainless steel fittings are recommended.
Q: Can I use solvent cement on FIP threaded ends?
A: No, threaded connections should be sealed using PTFE thread tape or approved thread sealant paste, not PVC solvent cement.
Q: Is this a live swivel elbow?
A: No. This is a static, rigid 90° elbow designed for fixed plumbing installations. It does not rotate under pressure.
Warranty & Safety Information
Warranty Coverage: Clean Storm products are covered by a standard 1-year limited manufacturer warranty against defects in materials and workmanship under normal installation and operating conditions.
Warranty Void Conditions: The warranty is voided by over-tightening leading to thread failure or body cracking, exposure to temperatures exceeding 140°F (60°C), operating above maximum rated pressure (150 PSI), exposure to incompatible solvents/chemicals, or installing in dynamic continuous-rotation applications.
Safety Precaution: Always depressurize and drain liquid systems prior to installing, removing, or servicing pipe fittings to prevent high-pressure fluid splash or injury.
|