

Clean Storm 20200910, 12V 9Ah AGM Sealed Lead Acid Generator Battery Nut & Bolt Terminals
Description
The Clean Storm 20200910 12 Volt 9Ah Sealed Lead Acid AGM Battery delivers reliable, maintenance-free high-capacity starter and auxiliary power for generators, equipment engines, and back-up systems. Engineered with Absorbent Glass Mat (AGM) technology and heavy-duty nut & bolt screw-in terminals, this leak-proof 12V 9 Amp rechargeable battery ensures optimal conductivity, low self-discharge, and high discharge efficiency across demanding commercial and residential applications.
Features
- AGM Maintenance-Free Design: Advanced Absorbent Glass Mat construction eliminates acid spills, topping off fluids, and hazardous maintenance.
- Secure Nut & Bolt Terminals: Corrosion-resistant screw-in nut and bolt terminal configuration ensures vibration-resistant electrical connections under high load.
- Rugged Impact-Resistant Casing: High-durability ABS plastic housing protects against mechanical impact, intense vibration, and harsh environmental exposure.
- High Rate Discharge & Efficient Recovery: Engineered for optimal starting power, sustained current output, and rapid recharge capability.
- Low Self-Discharge Rate: Superior shelf life allows prolonged storage while maintaining readiness for emergency back-up and seasonal generator use.
Applications
- Portable & Standby Generators: Compact engine electric starters for emergency portable and standby generators.
- Commercial Cleaning Equipment: Carpet extractors, portable pressure washer starter systems, and truckmount ignition circuits.
- Uninterruptible Power Supplies (UPS): Back-up power units, emergency lighting, and critical security/alarm control panels.
- Mobility & Utility Equipment: Lawn care equipment, mobility scooters, electric sprayers, and outdoor power units.
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20200910 |
| Nominal Voltage |
12 Volts (12V) |
| Capacity Rating |
9 Amp Hours (9Ah / 9 Amps) |
| Battery Type / Chemistry |
Sealed Lead Acid (SLA) / AGM (Absorbent Glass Mat) |
| Terminal Configuration |
Nut & Bolt (Screw-In / Hardware Included) |
| Length |
5.94 inches (151 mm) |
| Width |
2.56 inches (65 mm) |
| Height (Over Terminals) |
3.94 inches (100 mm) |
| Rechargeable |
Yes |
| Operating Temperature Range |
Discharge: -4°F to 140°F (-20°C to 60°C); Charge: 32°F to 104°F (0°C to 40°C) |
| Color / Finish |
Black / Dark Gray (Exact color shade may vary) |
Cross-Reference SKUs
| Clean Storm 20200910 |
| ExpertPower EXP1290 |
| Universal Power Group UPG UB1290 |
| MightyMax ML9-12 |
| Power-Sonic PS-1290 |
| Power King PK1290 |
| UPG 45825 |
| UB1290 |
| EXP1290 |
| PS1290 |
| ML912 |
| 12V9AH SLA |
Tips and Additional Information
Before installation, inspect the terminal connections and outer casing for any shipping damage or debris. Ensure correct polarity matching (positive red terminal to positive lead, negative black terminal to negative lead) prior to fastening hardware. Tighten nut & bolt terminals securely to prevent high-resistance connection arches, but do not overtighten to avoid terminal post damage. Coat terminals with dielectric grease post-installation to prevent oxidation in high-humidity or outdoor operational environments. Charge fully prior to first use and store in a cool, dry place when idle.
Frequently Asked Questions
Q: What terminal type does the Clean Storm 20200910 battery use?
A: This battery features nut & bolt (screw-in) terminals, providing a secure, vibration-resistant bolt-on connection rather than standard slide-on spade (F1/F2) terminals.
Q: Is this battery ready to use out of the box?
A: Yes, the battery arrives factory-sealed and charged. However, top-off charging prior to initial installation is recommended for maximum service life.
Q: Can this replace standard 12V 7Ah, 8Ah, or 9Ah AGM batteries?
A: Yes, as long as the compartment dimensions (5.94" L x 2.56" W x 3.94" H) and nut & bolt terminal setup match your application's requirements.
Q: Does the battery require refilling with electrolyte or water?
A: No. It utilizes maintenance-free AGM technology, meaning the acid is fully absorbed in glass mat separators, eliminating any liquid maintenance.
Warranty & Safety Information
This product is backed by a 90-day standard manufacturer warranty covering material and workmanship defects. Warranty coverage is voided if the battery is subjected to reverse-polarity wiring, physical damage to casing or terminals, overcharging, deep discharge below recommended thresholds, short-circuiting terminals, or installation in unvented sealed enclosures exceeding maximum thermal limits. Always wear protective eyewear and gloves during battery installation, and never short the positive and negative terminals together.
|