

Clean Storm 20211130, Cart Cold Water Electric Pressure Washer 3000 PSI 4 GPM 7.5 HP 230V 34A 1-Phase Steel Frame Industrial Cleaning
Description
Delivers 3000 PSI at 4 GPM using a 7.5 HP 230V single-phase electric motor and industrial triplex plunger pump for heavy-duty cold water cleaning. Built on a coated heavy tube steel cart frame with two 10-inch tires, this portable unit combines a 3-gallon chemical tank, low-pressure detergent injection, a 50-foot by 3/8-inch high-pressure hose, and an integrated wand and hose rack for dependable daily operation in commercial and industrial facilities.
Features
- Industrial triplex plunger pump equipped with wear-resistant ceramic plungers and stainless steel valves for extended service life and consistent pressure output.
- Dual pump protection featuring an unloader valve and secondary pop-off valve alongside mechanical thermal relief protection against overheating.
- Totally enclosed 7.5 HP electric motor with thermal overload protection engineered for 230V, 34A, single-phase commercial power circuits.
- Heavy tube steel cart frame finished with an industrial protective coating, rolling on two 10-inch tires with integrated wand and hose storage racks.
- Low-pressure chemical injection system paired with a 3-gallon plastic detergent tank, activated via the low-pressure detergent nozzle for targeted soap application.
- Includes a 50-foot by 3/8-inch high-pressure hose and a 10-foot power cord fitted with a NEMA 10-50 plug for ready deployment.
Applications
- Commercial and industrial washdowns, equipment degreasing, fleet and machinery maintenance, and shop floor cleaning.
- Indoor and outdoor cold water cleaning environments where electric power is preferred over combustion exhaust.
- Facilities requiring detergent pre-treatment or post-rinse via low-pressure chemical injection and a 3-gallon onboard tank.
- Mobile or semi-stationary job sites benefiting from a two-wheel steel cart frame with integrated hose and wand organization.
Specifications
| Brand |
Clean Storm |
| Part Number |
20211130 |
| Water Type |
Cold Water |
| Power Source |
Electric Motor (7.5 HP, 230 Volt, 34 Amp, 1 Phase) |
| Operating Pressure |
3000 PSI (207 Bar) |
| Flow Rate |
4 GPM (15.2 LPM) |
| Pump Type |
Industrial Triplex Plunger Pump with Ceramic Plungers and Stainless Steel Valves |
| Pump Safety Valves |
Unloader Valve, Secondary Pop-Off Valve, Mechanical Thermal Protection |
| Motor Enclosure |
Totally Enclosed with Thermal Overload Protection |
| Max Inlet Water Temperature |
160° F |
| Chemical Delivery |
Low-Pressure Chemical Injection with 3-Gallon Plastic Tank (Activated by Low-Pressure Nozzle) |
| High-Pressure Hose |
50 ft x 3/8 in |
| Power Cord |
10 ft with NEMA 10-50 Plug |
| Frame & Mobility |
Heavy Tube Steel Cart Frame with Industrial Coating, Two 10 in Tires, Integrated Wand and Hose Rack |
| Product Dimensions |
37 in x 23.5 in x 36 in |
| Shipping Weight |
265 lbs |
Cross-Reference SKUs
| 20211130 |
| Clean Storm 20211130 |
| CS-20211130 |
| CS20211130 |
Tips and Additional Information
Before startup, perform a thorough pre-use inspection of the 50-foot by 3/8-inch hose, couplings, fittings, wand, power cord, NEMA 10-50 plug, and chemical tank for wear, leaks, or damage. Apply suitable thread sealant tape or compound on threaded hydraulic fittings where required, ensure clean water supply without debris, and verify that the 230V, 34A single-phase circuit matches motor requirements. When applying detergent, switch to the low-pressure detergent nozzle to engage low-pressure chemical injection from the 3-gallon tank, and always relieve trapped system pressure before disconnecting lines or servicing components.
Frequently Asked Questions
Q: What electrical supply does the Clean Storm 20211130 require?
It requires a 230-volt, 34-amp, single-phase power supply and comes with a 10-foot power cord equipped with a NEMA 10-50 plug.
Q: How is low-pressure detergent application activated on this unit?
Low-pressure chemical injection draws from the 3-gallon plastic chemical tank and is activated by installing the low-pressure detergent nozzle.
Q: What is the maximum inlet water temperature rating for the pump?
The pump is rated for a maximum inlet water temperature of 160° F, though the unit is configured as a cold water pressure washer.
Q: What protection features safeguard the pump and motor during operation?
The triplex plunger pump includes an unloader valve, a secondary pop-off valve, and mechanical thermal protection, while the 7.5 HP motor is totally enclosed with thermal overload protection.
Warranty & Safety Information
Warranty coverage terms are governed by Clean Storm manufacturer policy and may be voided by improper electrical hookup, exceeding 3000 PSI or the 160° F maximum inlet water temperature, running the pump dry, using unapproved chemicals, or unauthorized modifications. High-pressure 3000 PSI water streams can cause severe injection injuries, lacerations, and flying debris hazards; never point the wand at people, animals, or energized electrical equipment, and wear appropriate eye, hearing, and protective gear. Ensure proper grounding and circuit protection for the 230V, 34A connection, and keep the cart stable on level ground during operation.
|