

Clean Storm 20211215, Stationary Natural Gas Fired Electric Powered 2.5 gpm 2700 psi Hot Water Pressure Washer Skid Steel Frame
Description
The Clean Storm 20211215 stationary industrial hot water pressure washer delivers 2.5 gpm at 2700 psi using an efficient natural gas-fired forced-air burner and a 230V electric motor. Designed for permanent facility installation, it features an industrial triplex plunger pump with ceramic plungers, a schedule 80 heating coil with stainless steel wrap, and a robust coated steel skid frame.
Features
- Industrial totally enclosed, fan-cooled motor with thermal overload protection for heavy-duty operational reliability.
- Industrial triplex plunger pump featuring ceramic plungers, stainless steel valves, unloader valve, and a secondary pressure pop-off.
- Forced-air natural gas burner system equipped with an adjustable thermostat and temperature limit switch reaching up to 195 degrees Fahrenheit.
- Schedule 80 heating coil protected by a durable stainless steel wrap for maximum thermal efficiency and corrosion resistance.
- Low-pressure chemical injection system optimized for applying liquid concentrates and detergents seamlessly with the included hose.
- Heavy-duty trigger gun paired with a dual wand and side handle valve for quick switching between high-pressure wash and detergent modes.
Applications
- Automotive repair shops and commercial vehicle fleet washing facilities.
- Industrial manufacturing plants and heavy equipment maintenance bays.
- Agricultural facilities, dairy barns, and livestock equipment sanitation.
- Municipal maintenance yards, loading docks, and facility sanitation workflows.
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20211215 |
| Product Type |
Stationary Hot Water Pressure Washer |
| Water Type |
Hot |
| Powered By |
Electric Motor / Natural Gas Burner |
| Mounting Type |
Stationary Skid |
| Flow Rate |
2.5 GPM / 9.5 LPM |
| Operating Pressure |
2700 PSI / 186 Bar |
| Horsepower |
5 HP |
| Voltage / Amperage / Phase |
230 Volt / 25 Amp / 1-Phase |
| Heated By / Fuel Type |
Natural Gas |
| Max Temperature |
195° F |
| Pump Thermal Protection |
Mechanical |
| Max Pump Inlet Water Temp |
140° F |
| Hose Dimensions |
50' x 3/8" |
| Power Cord |
35' with GFCI |
| Burner Stack Dimension |
8" |
| Product Dimensions |
47" x 29" x 46" |
| Shipping Weight |
450 lbs |
| Primary Material |
Industrial Coated Steel Tubing |
Cross-Reference SKUs
| Clean Storm 20211215 |
| CS-20211215 |
| 20211215 Hot Water Pressure Washer |
| Clean Storm Stationary Gas Pressure Washer 2700 PSI |
| NG Fired Pressure Washer 2.5 GPM 230V |
Tips and Additional Information
Ensure proper ventilation, make-up air supply, and professional HVAC connection for the 8-inch burner stack before operating. Connect the unit securely to a dedicated 1-inch natural gas supply line. Inspect all electrical connections, GFCI cords, unloader valve settings, and high-pressure hose fittings prior to startup. Always operate fuel-burning equipment outdoors or within a properly vented professional installation environment adhering to local codes.
Frequently Asked Questions
Q: What power supply is required to operate this pressure washer?
A: This unit requires a 230 Volt, 25 Amp, single-phase electrical supply and a dedicated 1-inch natural gas line for the burner system.
Q: Can this pressure washer be used indoors?
A: Yes, but it requires professional HVAC venting and adequate makeup air installation to safely exhaust combustion gases from the natural gas burner.
Q: What is the maximum output water temperature of the burner?
A: The system is controlled by an adjustable thermostat and temperature limit switch to reach a maximum operating temperature of 195 degrees Fahrenheit.
Q: How does the chemical injection system function with long hoses?
A: The low-pressure chemical injector operates best within the included 50-foot hose length. For longer hose runs, the injector must be relocated within 50 feet of the trigger gun.
Warranty & Safety Information
Covered by the manufacturer's standard industrial equipment warranty against defects in materials and workmanship. Warranty is strictly voided by operating the equipment above maximum pressure or temperature ratings, failing to provide proper ventilation and makeup air, unauthorized modifications, using improper electrical supply or fuel connections, or failing to perform routine pump and burner maintenance.
Optional
|