

Clean Storm 20211216 Stationary Natural Gas Hot Water Pressure Washer - 3 GPM, 1000 PSI, 120V Electric Powered Steel Frame
Description
Clean Storm 20211216 stationary industrial hot water pressure washer delivers 3 GPM at 1000 PSI, powered by an electric motor and heated by natural gas. Designed for heavy-duty commercial cleaning, this stationary system features an industrial triplex plunger pump, schedule 80 heating coil with stainless steel wrap, forced-air burner technology, and a robust industrial-coated steel tubing skid frame for optimal performance and durability.
Features
- Industrial triplex plunger pump equipped with ceramic plungers and stainless steel valves for extended operational life.
- Schedule 80 heating coil featuring a stainless steel wrap, controlled via an adjustable thermostat and temperature limit switch (max 195° F).
- Totally enclosed, thermal overload-protected electric motor ensuring safe and reliable operation.
- Protected by a built-in unloader valve and secondary pressure pop-off valve.
- Low-pressure chemical injection system optimized for applying concentrated liquid detergents and solutions.
- Heavy-duty trigger gun paired with a dual wand featuring a side handle valve for seamless switching between high-pressure washing and detergent application.
- Robust industrial-coated steel tubing skid frame built for permanent stationary installation.
Applications
- Commercial and industrial vehicle fleet washing facilities.
- Automotive repair shops and heavy equipment maintenance bays.
- Agricultural equipment cleaning and sanitation operations.
- Manufacturing plant and warehouse floor degreasing.
- Stationary shop applications requiring continuous hot water pressure washing capabilities.
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20211216 |
| Water Type |
Hot |
| Powered By |
Electric Motor |
| Heated By |
Natural Gas |
| Mounting Type |
Stationary / Skid |
| Flow Rate |
3 GPM / 11.4 LPM |
| Operating Pressure |
1000 PSI / 69 Bar |
| Horsepower |
2 HP |
| Voltage / Amperage / Phase |
120 Volt / 20 Amp / 1 Phase |
| Product Dimensions |
47" x 29" x 46" |
| Pump Thermal Protection |
Mechanical |
| Max Pump Inlet Water Temp |
140° F |
| Hose Dimension |
50' x 3/8" |
| Power Cord |
35' with GFCI |
| Burner Stack Dimension |
8" |
| Shipping Weight |
450 lbs |
Cross-Reference SKUs
| Clean Storm 20211216 |
| CS-20211216 |
| CleanStorm Stationary Natural Gas Pressure Washer 3GPM 1000PSI |
| 20211216 Hot Water Pressure Washer |
Tips and Additional Information
Proper ventilation and make-up air are critical for safety and efficient combustion; always consult a local HVAC professional for correct exhaust venting setup. Ensure the unit is connected to a dedicated 1-inch gas supply line and operated outdoors or within a properly vented commercial environment. Perform pre-installation inspections on all electrical connections, water supply lines, and thermal relief valves before initial startup. Utilize the included 50-foot hose for optimal low-pressure chemical injector performance; longer hose runs require relocating the injector closer to the trigger gun.
Frequently Asked Questions
Q: What fuel type does the burner use?
A: The water heater burner operates on Natural Gas and requires connection to a 1-inch gas line along with proper exhaust venting.
Q: Can this pressure washer be used indoors?
A: It must be installed in a well-ventilated area with professional HVAC stack venting and adequate make-up air for safe combustion.
Q: How does the low-pressure chemical injection work?
A: The system draws liquid detergents downstream of the pump at low pressure, operating best with the supplied 50-foot hose length.
Q: What electrical requirements are needed for operation?
A: The unit operates on 120 Volt, 20 Amp, single-phase power and includes a 35-foot power cord equipped with a GFCI.
Warranty & Safety Information
Covered by the manufacturer's standard commercial warranty against defects in materials and workmanship. Warranty is strictly voided by operating the equipment above maximum pressure or temperature ratings, failing to provide adequate HVAC stack venting and combustion air, using unapproved fuels, failing to maintain proper water supply filtration, or running the unit without proper electrical grounding and GFCI protection. Always adhere to high-pressure safety guidelines and wear appropriate personal protective equipment during operation.
|