

Clean Storm 20211221, Stationary LP Gas Fired Electric Powered 4 gpm 3000 psi Hot Water Pressure Washer, 230 Volt 40 Amp
Description
Clean Storm 20211221 stationary LP gas-fired electric-powered hot water pressure washer delivers 4 GPM at 3000 PSI, featuring a 230V 34A motor, industrial triplex plunger pump, schedule 80 heating coil, and enclosed steel frame for heavy-duty cleaning.
Features
- Industrial totally enclosed motor with thermal overload protection for demanding work environments.
- Industrial triplex plunger pump with ceramic plungers and stainless steel valves protected by an unloader and secondary pressure pop-off.
- Forced air burner system with a schedule 80 coil and stainless steel wrap controlled by an adjustable thermostat up to 195° F.
- Low-pressure chemical injection system for efficient application of concentrated liquid detergents and solutions.
- Heavy-duty skid frame constructed from industrial coated steel tubing for maximum structural durability.
Applications
- Heavy industrial equipment and machinery degreasing and maintenance.
- Commercial fleet vehicle and heavy truck washing bays.
- Agricultural facility cleaning, livestock equipment sanitation, and farmyard cleanup.
- Food processing plant sanitation and industrial floor scrubbing operations.
- Municipal and construction site heavy equipment washing.
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20211221 |
| Water Type |
Hot |
| Powered By |
Electric Motor |
| Mounting Type |
Stationary Skid |
| Flow Rate |
4 GPM / 15.2 LPM |
| Operating Pressure |
3000 PSI / 207 Bar |
| Horsepower |
7.5 HP |
| Voltage / Amperage / Phase |
230 Volt / 34 Amp / 1-Phase |
| Heated By / Fuel Type |
L.P. Gas |
| Max Temperature |
195° F |
| Max Pump Inlet Water Temp |
140° F |
| Pump Thermal Protection |
Mechanical |
| Product Dimensions |
47" x 29" x 46" |
| Hose Dimension |
50' x 3/8" |
| Power Cord Length |
10' |
| Burner Stack Dimension |
8" |
| Ship Weight |
570 lbs |
Cross-Reference SKUs
| Clean Storm 20211221 |
| CS-20211221 |
| CS20211221 |
| Stationary LP Hot Water Pressure Washer 4GPM 3000PSI |
Tips and Additional Information
Ensure proper ventilation and make-up air are established by consulting your local HVAC professional before operating. Since this unit burns L.P. Gas and requires a 1-inch gas line, it must be operated outdoors or in a properly vented facility. For optimal chemical injection performance when using extended hose lengths beyond 50 feet, relocate the injector within 50 feet of the trigger gun. Inspect all electrical connections, fluid levels, and gas supply lines thoroughly prior to initial startup.
Frequently Asked Questions
Q: What are the electrical requirements for this pressure washer?
A: This unit requires a 230 Volt, 34 Amp, single-phase electrical supply for its 7.5 HP motor.
Q: Can this pressure washer be used indoors?
N/A: It must be operated outdoors or connected to a proper exhaust venting system (including an 8-inch burner stack and adequate make-up air) by a qualified HVAC professional due to fuel combustion emissions.
Q: How does the chemical injection system function over long hose runs?
A: The low-pressure chemical injector operates best with the included 50-foot hose. For longer hose or pipeline systems, the injector must be relocated to be within 50 feet of the trigger gun.
Warranty & Safety Information
Clean Storm equipment is backed by manufacturer defect warranties covering select industrial components under normal use. Warranty is voided if: the unit is operated above its maximum pressure (3000 PSI) or temperature (195° F) ratings; the equipment is used indoors without proper exhaust venting and make-up air; unauthorized modifications or non-OEM replacement parts are utilized; or damage occurs due to improper electrical supply connections, freezing, or inadequate maintenance and fuel line sizing.
|