

Clean Storm 20211226, Wall Mount Electric Cold Water Pressure Washer, Industrial Coated Frame, 5 GPM 3000 PSI, 230V 40A 1-Phase, 3/8" x 50' Hose
Description
The Clean Storm 20211226 is an industrial wall mount electric cold water pressure washer delivering 5 GPM at 3000 PSI on 230V 40A single-phase power. Designed as a cost-saving open-frame economy model without a protective outer cover, this stationary unit keeps commercial wash bays clutter-free by securing high-output cleaning equipment directly to the wall. Driven by a 10 HP totally enclosed, thermal overload-protected motor and an industrial triplex plunger pump with ceramic plungers and stainless steel valves, it includes a 50' x 3/8" high-pressure hose, trigger gun, wand, low-pressure chemical injector, and four quick-connect Q-meg spray nozzles.
Features
- Space-Saving Open Wall-Mount Frame: Economy open-frame architecture eliminates the expense of a full outer cover while mounting securely to shop walls to protect equipment from floor traffic and standing water.
- Industrial-Coated Steel Construction: Heavy-duty frame features a corrosion-resistant industrial coating, built-in rubber grommets for organized nozzle storage, and an integrated bottom hook for hanging the trigger gun, wand, and hose.
- 10 HP Totally Enclosed Electric Motor: Operates on 230 Volt, 40 Amp single-phase electrical service and incorporates integrated thermal overload protection to prevent motor burnout during extended duty cycles.
- Commercial Triplex Plunger Pump: Engineered with wear-resistant ceramic plungers, stainless steel valves, mechanical pump thermal protection, and a pressure-regulating unloader valve for continuous 3000 PSI / 5 GPM operation.
- Downstream Low-Pressure Chemical Injection: Built-in detergent injector draws concentrated liquid cleaning agents automatically whenever the low-pressure soap tip is installed on the wand.
- Complete Ready-to-Wash Accessory Package: Ships complete with a 50-foot by 3/8-inch high-pressure hose, heavy-duty trigger gun, wand, 10-foot power cord, and 0°, 15°, 25°, and 40° Q-meg spray nozzles.
Applications
- Commercial automotive detailing bays, car washes, and dealership prep stations
- Municipal fleet maintenance facilities, trucking terminals, and heavy equipment washdowns
- Food processing plants, commercial kitchens, and agricultural washrooms
- Manufacturing floors, industrial machine shops, and warehouse sanitation
- Contract cleaning shops requiring stationary, high-flow 5 GPM cold water rinsing
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20211226 (Ref: 2021126) |
| Mounting Configuration |
Stationary Wall Mount (Open Frame / No Cover) |
| Frame Finish |
Industrial Protective Coating with Nozzle Grommets & Hose/Gun Hook |
| Water Temperature Type |
Cold Water (Max Pump Inlet Water Temp: 160° F) |
| Operating Pressure |
3000 PSI / 207 Bar (Listed spec: 3000 / 20) |
| Flow Rate |
5 GPM / 19 LPM |
| Motor Horsepower & Enclosure |
10 HP Totally Enclosed Electric Motor with Thermal Overload Protection |
| Electrical Requirements |
230 Volt / 40 Amp / Single Phase (1-Phase) |
| Power Cord Length |
10 Feet |
| Pump Type & Construction |
Industrial Triplex Plunger Pump with Ceramic Plungers & Stainless Steel Valves |
| Pump Protection & Unloader |
Unloader Valve & Mechanical Pump Thermal Protection |
| Chemical Injection System |
Low-Pressure Downstream Chemical Injection (Soap Tip Activated) |
| High-Pressure Hose & Threads |
50' x 3/8" High-Pressure Hose (Standard 3/8" NPTF Tapered / Quick-Connect Swivel Interfaces) |
| Included Nozzles & Gun |
Trigger Gun, Wand, and 0°, 15°, 25°, 40° Q-Meg Quick-Connect Tips |
| Swivel Mechanics (Standard Fittings) |
Non-Live Installation Swivels / Quick-Disconnect Couplers (Use Optional Live Rotary Swivel for Continuous Gun Rotation) |
| Overall Dimensions (L x W x H) |
28" x 22" x 30" |
| Shipping Weight |
300 lbs |
Cross-Reference SKUs
| 20211226 |
| 2021126 |
| Clean Storm 20211226 |
| Clean Storm 2021126 |
| CS-20211226 |
| CS20211226 |
| 2021-1226 |
Tips and Additional Information
Pre-Installation Inspection & Wall Mounting: Because this unit has a 300 lb shipping weight and generates substantial hydraulic reaction torque, anchor the frame into structural masonry, concrete, or reinforced steel wall studs rated well above the dynamic load. Inspect the oil sight glass on the triplex plunger pump and verify shipping plugs are replaced with vented dipsticks prior to initial startup.
Thread Sealing & Alignment Practices: When connecting the water supply inlet, downstream chemical injector, or 3/8" high-pressure discharge fittings, apply PTFE thread seal tape or high-pressure anaerobic thread sealant only to male NPTF tapered pipe threads. Keep the first two threads bare to prevent tape shreds from fouling the stainless steel pump check valves or unloader seat, and never apply sealant to straight mechanical NPSM swivel seats or O-ring quick-disconnects. Align all fittings straight by hand before wrench-tightening to avoid cross-threading.
Live vs. Non-Live Swivel Distinction: Standard rigid 3/8" hose fittings and non-live installation swivels are designed solely for static alignment during assembly and will bind or leak if rotated under 3000 PSI pressure. If your operators require continuous 360-degree trigger gun rotation during washing, install a dedicated high-pressure live rotary swivel rated for at least 3000 PSI and 5 GPM between the 3/8" hose and trigger gun.
Frequently Asked Questions
Q: What electrical circuit is required to run the Clean Storm 20211226?
A: This unit requires a dedicated 230 Volt, 40 Amp, single-phase electrical circuit. Due to the 40-amp draw of the 10 HP industrial motor, hardwiring or an appropriately rated heavy-duty industrial disconnect installed by a licensed electrician is recommended.
Q: Why is this model labeled an economy wall mount pressure washer?
A: It is designated as an economy model strictly because it omits an outer sheet-metal cabinet or cover to lower equipment cost. It still features the full commercial 10 HP motor, industrial ceramic-plunger triplex pump, unloader valve, and coated steel wall frame.
Q: Can I feed hot water into this cold-water pressure washer?
A: This machine does not have a burner to heat water, so it is classified as a cold-water washer; however, the triplex pump features mechanical thermal protection and accepts preheated inlet water up to a maximum temperature of 160° F.
Q: How does the chemical injection system work, and are standard hose fittings live swivels?
A: The low-pressure downstream chemical injector activates automatically when you insert the low-pressure soap nozzle into the wand, dropping line pressure to draw detergent. Standard 3/8" hose connections are non-live installation fittings and should not be twisted under pressure unless upgraded with a continuous-duty live rotary union.
Warranty & Safety Information
Manufacturer Warranty Coverage: The Clean Storm 20211226 is backed by the manufacturer's commercial equipment warranty covering defects in materials and workmanship on the industrial-coated frame, 10 HP totally enclosed electric motor, and triplex plunger pump assembly under normal commercial service.
Conditions That Void Warranty & Critical Safety Warnings: Warranty coverage is voided by running the pump dry without adequate water flow, exceeding the 3000 PSI maximum operating pressure or 160° F maximum inlet water temperature, operating on improper voltage or undersized wiring, freezing water inside the pump manifold, or using non-live fittings in continuous rotary applications. Always relieve residual system pressure by squeezing the trigger gun after shutting off power before disconnecting the 3/8" high-pressure hose or changing Q-meg nozzles to prevent severe high-pressure fluid injection injuries.
|