

Clean Storm 20211230, Wall Mount Cold Water Electric Pressure Washer 4 GPM 3000 PSI 3 Phase Industrial Coated Frame
Description
Clean Storm 20211230 Wall Mount Cold Water Electric Pressure Washer delivers 4.0 GPM at 3000 PSI using a 7.5 HP 230V 3-phase motor and industrial triplex plunger pump. Designed as an open-frame economy model without a protective outer cover, this space-saving unit mounts directly to facility walls to keep high-pressure cleaning equipment off the floor and secure. The heavy-duty frame features an industrial protective coating, integrated rubber nozzle grommets, and a built-in bottom storage hook to neatly hold the included trigger gun, wand, and 50-foot high-pressure hose. Engineered for continuous commercial duty, the system integrates a totally enclosed, thermal overload-protected motor, a ceramic-plunger pump with stainless steel valves, an unloader valve, mechanical thermal pump protection, and a low-pressure downstream chemical injector activated via the soap nozzle.
Features
- Open-frame economy wall-mount construction eliminates the cost of a full enclosure while securing equipment off the shop floor in a compact 28" x 22" x 30" footprint.
- Industrial-grade coated steel mounting frame resists corrosion and includes built-in rubber grommets for organized nozzle storage plus an integrated lower hook for hanging the gun, wand, and 50' hose.
- Heavy-duty 7.5 HP 230V 3-phase electric motor is totally enclosed and equipped with thermal overload protection for reliable operation in demanding commercial environments.
- Commercial triplex plunger pump features wear-resistant ceramic plungers, corrosion-resistant stainless steel valves, an adjustable unloader valve, and mechanical thermal relief protection up to 160° F.
- Integrated low-pressure chemical injection system draws liquid detergent concentrates automatically when the low-pressure soap nozzle is installed on the wand.
- Complete ready-to-wash accessory package includes a heavy-duty trigger gun, wand, 50' x 3/8" high-pressure discharge hose, 10' electrical power cord, and 0°, 15°, 25°, and 40° quick-connect Q-meg spray nozzles.
Applications
- Automotive dealerships, fleet maintenance bays, and commercial car or truck wash facilities requiring stationary cold-water high-pressure cleaning.
- Manufacturing plants, machine shops, and industrial warehouses needing centralized washdown stations without sacrificing valuable floor space.
- Agricultural barns, dairy parlors, and food processing prep areas utilizing cold-water sanitation and downstream detergent application.
- Municipal garages, equipment rental yards, and commercial contractor wash bays outfitted with 230V 3-phase electrical service.
Specifications
| Brand |
Clean Storm |
| Model / Part Number |
20211230 (Alt Ref: 2021130) |
| Configuration |
Wall Mount, Open Frame / No Cover (Economy Model) |
| Water Temperature Type |
Cold Water (Max Pump Inlet Water Temp: 160° F) |
| Operating Pressure |
3000 PSI / 207 Bar (Max Rated Rating: 276 Bar) |
| Flow Rate |
4.0 GPM / 15.2 LPM |
| Motor Horsepower |
7.5 HP Industrial Totally Enclosed |
| Electrical Requirements |
230 Volt / 17 Amp / 3 Phase |
| Power Cord Length |
10 Feet |
| Motor Protection |
Thermal Overload Protected |
| Pump Type & Internals |
Industrial Triplex Plunger Pump with Ceramic Plungers & Stainless Steel Valves |
| Pump Protection |
Pressure Unloader Valve & Mechanical Thermal Relief Valve |
| Chemical Injection |
Low-Pressure Downstream Detergent Injector (Soap Tip Activated) |
| Discharge Hose Dimensions |
50' Length x 3/8" Inner Diameter (Standard 3/8" NPT / Quick-Connect Fittings) |
| Included Nozzles |
0°, 15°, 25°, 40° Q-Meg Quick-Connect Spray Tips + Soap Nozzle |
| Frame Material & Finish |
Heavy-Duty Steel with Industrial Protective Coating |
| Overall Dimensions (L x W x H) |
28" x 22" x 30" |
| Shipping Weight |
300 lbs |
Cross-Reference SKUs
| 20211230 |
| CS-20211230 |
| CS20211230 |
| 2021130 |
| CS-2021130 |
| CS2021130 |
| CLEANSTORM-20211230 |
| CLEAN-STORM-20211230 |
Tips and Additional Information
Before mounting the Clean Storm 20211230, verify that the supporting wall structure and anchor hardware can safely bear the 300 lb unit weight plus dynamic operating vibration and hose pull loads. Because this economy model features an open frame without a protective cover, install it in an indoor or sheltered wash bay away from direct overhead water spray and excessive airborne debris. Inspect all high-pressure fittings prior to startup; apply PTFE thread sealant tape or industrial pipe dope to male NPT tapered threads during accessory assembly, while leaving straight mechanical swivel fittings and O-ring quick-connect couplers free of tape so O-rings seal properly. Note that standard 3/8" hose swivels on trigger guns are designed for installation alignment and low-torque positioning rather than continuous high-speed rotary union operation. Always purge air from the pump and water supply line by squeezing the trigger gun with the water turned on before energizing the 230V 3-phase motor, and ensure a licensed electrician verifies proper 3-phase motor rotation direction upon initial wiring.
Frequently Asked Questions
Q: Why is the Clean Storm 20211230 classified as an economy model?
A: It is designated as an economy model because it omits the full outer protective cabinet/cover, lowering the overall purchase price while retaining the exact same industrial 7.5 HP 3-phase motor, ceramic triplex plunger pump, and coated wall-mount frame.
Q: Can I plug this pressure washer into a standard single-phase 220V outlet?
A: No. This unit requires a dedicated 230 Volt, 3-Phase electrical supply rated for at least 17 Amps. Connecting it to single-phase power without a properly sized rotary phase converter will damage the 7.5 HP motor.
Q: How do I activate the chemical injector to apply soap?
A: The low-pressure downstream chemical injector activates automatically when pressure drops in the discharge line. Simply insert the low-pressure soap nozzle onto the end of your wand and place the chemical pickup tube into your liquid detergent concentrate.
Q: Can I feed hot water into this cold-water pressure washer?
A: While this is a cold-water pressure washer without an onboard burner, the industrial triplex pump is rated for a maximum inlet water temperature of 160° F, allowing you to supply warm water from a facility hot water line as long as it never exceeds 160° F.
Q: Should I use Teflon tape on the 3/8" quick-connect hose couplers?
A: Use PTFE thread tape or liquid thread sealant only on the tapered NPT pipe threads where couplers screw onto the pump outlet, hose ends, or trigger gun. Do not wrap tape around the smooth quick-connect plug barrels or internal O-ring seats.
Warranty & Safety Information
The Clean Storm 20211230 is backed by manufacturer warranty coverage against defects in materials and workmanship under normal commercial use. Warranty coverage is voided by improper electrical installation (such as single-phasing or incorrect voltage), running the pump dry without adequate water supply, exceeding the maximum 160° F inlet water temperature, operating above the 3000 PSI rated pressure, freezing water inside the pump manifold, or using non-live hose swivels in continuous rotary applications. For operator safety, never disconnect high-pressure hoses or quick-connect nozzles while the system is pressurized, always relieve residual line pressure by turning off the power and squeezing the trigger gun before servicing, and ensure the wall mounting hardware is securely anchored into structural studs or masonry before operation.
|