

Clean Storm 20211239, Base Mount Electric Cold Water Pressure Washer 3000 PSI 4 GPM 7.5 HP 230V 3 Phase Industrial
Description
The Clean Storm 20211239 is a heavy-duty base-mounted electric cold water pressure washer delivering 3000 PSI at 4 GPM for continuous industrial cleaning. Powered by a 7.5 HP, 230 Volt, 17 Amp, 3-phase totally enclosed motor paired with a commercial triplex ceramic plunger pump, this stationary wash unit is engineered to bolt directly onto flat surfaces, custom skids, or wash bay platforms. Complete with a low-pressure chemical injector, unloader valve, 50-foot high-pressure hose, trigger gun, and quick-connect nozzles, it provides reliable, high-impact cleaning power without exhaust fumes.
Features
- Industrial 7.5 HP totally enclosed fan-cooled (TEFC) 230V 3-phase electric motor with built-in thermal overload protection for continuous duty cycles.
- Commercial-grade triplex plunger pump equipped with wear-resistant solid ceramic plungers and corrosion-resistant stainless steel valves.
- Integrated pressure-trapping unloader valve and mechanical pump thermal relief valve to safeguard internal seals from over-pressurization and heat buildup.
- Heavy-duty rigid steel foot-mount base frame designed for permanent, low-vibration installation on concrete floors, wall shelves, or mobile trailer skids.
- Downstream low-pressure chemical injection system that automatically draws concentrated liquid detergents when switching to the low-pressure soap nozzle.
- Ready-to-spray accessory package featuring a heavy-duty trigger gun, insulated wand, 50-foot by 3/8-inch wire-braided hose, and 0°, 15°, 25°, and 40° Q-Meg quick-connect spray tips.
Applications
- Stationary automotive, fleet, and heavy equipment wash bays requiring fume-free indoor operation.
- Food processing facilities, commercial kitchens, and agricultural barns requiring high-pressure sanitation.
- Manufacturing plants, machine shops, and industrial maintenance facilities for degreasing machinery and production floors.
- Custom wash skids, utility vehicles, and stationary in-plant central pressure washing stations.
- Commercial property maintenance, concrete surface prep, and heavy-duty degreasing operations.
Specifications
| Brand |
Clean Storm (Cam Spray Platform) |
| Model / Part Number |
20211239 |
| Water Type |
Cold Water |
| Operating Pressure |
3000 PSI (207 Bar) |
| Flow Rate |
4.0 GPM (15.2 LPM) |
| Motor Horsepower |
7.5 HP |
| Electrical Requirements |
230 Volt, 17 Amp, 3 Phase, 60 Hz |
| Motor Enclosure & Protection |
Totally Enclosed, Thermal Overload Protected |
| Pump Type & Construction |
Industrial Triplex Plunger Pump with Ceramic Plungers & Stainless Steel Valves |
| Pump Thermal Protection |
Mechanical Thermal Relief Valve |
| Pressure Regulation |
Adjustable Unloader Valve |
| Chemical Injection |
Low-Pressure Downstream Detergent Injector |
| Mounting Configuration |
Flat Surface Rigid Foot Base Mount |
| Maximum Inlet Water Temperature |
160°F (71°C) |
| High-Pressure Hose |
50 ft x 3/8 in ID with Quick-Connect Couplers |
| Included Nozzles |
0°, 15°, 25°, 40° Q-Meg Quick-Connect Tips + Soap Tip |
| Power Cord Length |
10 ft Industrial Jacketed Cord (Plug Not Included for 3-Phase Hardwire/Custom Plug) |
| Overall Dimensions (L x W x H) |
28 in x 20 in x 13 in |
| Shipping Weight |
220 lbs |
Cross-Reference SKUs
| 20211239 |
| CS-20211239 |
| CS20211239 |
| Clean Storm 20211239 |
| Cam Spray 20211239 |
| 30004E3-230 |
| 30004E3230 |
Tips and Additional Information
Before initial startup, inspect the triplex pump crankcase oil level via the sight glass and replace any solid shipping plug with the vented dipstick cap to prevent internal pressure buildup. Bolt the foot-mount base securely to a level, rigid surface using vibration-dampening pads to minimize harmonic stress on plumbing connections. When connecting water supply lines and high-pressure fittings, apply PTFE thread seal tape or hydraulic thread sealant only to male NPT tapered threads, leaving the first two threads bare to prevent sealant shreds from fouling the unloader or stainless steel check valves; never use thread tape on O-ring boss or quick-connect mechanical seals. Ensure a dedicated 3-phase 230V circuit is wired by a licensed electrician, and verify proper motor rotation direction upon initial power-up. Avoid running the unit in bypass mode (trigger released) for more than two minutes at a time to protect the pump seals from thermal damage.
Frequently Asked Questions
Q: Does this pressure washer require a standard household outlet or special 3-phase electrical wiring?
A: This unit requires a commercial 230 Volt, 3-phase, 17 Amp electrical supply. Because 3-phase receptacles vary by facility, it comes with a 10-foot power cord without a plug and must be wired to a matching 3-phase plug or disconnect switch by a qualified electrician.
Q: Can I feed hot water into the Clean Storm 20211239 pump?
A: While this is an unheated cold water pressure washer, its industrial triplex pump is rated for inlet water temperatures up to 160°F, allowing you to supply warm or tempered water from a facility hot water line without damaging the seals.
Q: How do I activate the chemical injection system?
A: The downstream chemical injector operates on a Venturi pressure drop. Simply attach the low-pressure soap tip to the end of your wand and squeeze the trigger; the drop in line pressure automatically draws detergent through the siphon tube.
Q: What size replacement spray nozzles should I use with this machine?
A: To maintain the rated 3000 PSI at 4.0 GPM without overloading the 7.5 HP motor or tripping the unloader, always use size 4.5 orifice quick-connect nozzles.
Warranty & Safety Information
The Clean Storm 20211239 is backed by a manufacturer limited warranty covering defects in materials and workmanship on the industrial motor, pump assembly, and base frame under normal commercial operating conditions. Warranty coverage will be voided by operating the pump dry without an adequate water supply, exceeding the 160°F maximum inlet water temperature, freezing water inside the pump manifold, improper 3-phase electrical wiring, altering the factory unloader pressure setting above 3000 PSI, or running caustic acids and bleach directly through the pump instead of the downstream chemical injector. For safe operation, always depressurize the system by shutting off the power and squeezing the trigger gun before disconnecting high-pressure hoses, wear ANSI-approved eye and hearing protection, and never point the high-pressure stream at people, animals, or electrical equipment.
|

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Clean Storm 20211239, Base Mount Electric Cold Water Pressure Washer 3000 PSI 4 GPM 7.5 HP 230V 3 Phase Industrial [20211239]
Click here for our full shipping policy. Specifications are subject to change without notice. Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products. Prop 65 Notice.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.
|