

Clean Storm 20211240, 3000 PSI Electric Cold Pressure Washer Steel Frame, 4 Gpm 230 Volt 34 Amp 1 Phase, Commercial Surface Cleaning
Description
Engineered for heavy-duty commercial operations, the Clean Storm 20211240 electric cold pressure washer delivers a robust 3000 PSI and 4 GPM cleaning performance. This bare-bones base-mounted motor and pump combination is designed for rigid flat-surface installation using a sturdy foot-mount base. Powered by a 230V 34A single-phase industrial electric motor with thermal overload protection, it drives a high-efficiency industrial triplex plunger pump featuring ceramic plungers and stainless steel valves. Equipped with low-pressure chemical injection, a 50-foot 3/8-inch high-pressure hose, trigger gun, and multiple quick-connect spray tips (0°, 15°, 25°, and 40°), this commercial-grade system provides reliable, continuous-duty cleaning power for demanding industrial and fleet maintenance environments.
Features
- Industrial 7.5 HP electric motor featuring total enclosure and mechanical thermal overload protection for extended duty cycles.
- Industrial triplex plunger pump equipped with durable ceramic plungers and corrosion-resistant stainless steel valves.
- Built-in adjustable unloader valve protecting pump components from over-pressurization during operation.
- Low-pressure chemical injection system activated via soap tip for seamless detergent and concentrate application.
- Includes a 50-foot by 3/8-inch heavy-duty high-pressure hose and professional trigger gun with NPTF tapered thread connections.
- Complete set of Q-meg quick-connect spray tips including 0°, 15°, 25°, and 40° patterns for versatile cleaning applications.
Applications
- Commercial fleet vehicle washing and heavy equipment maintenance yards.
- Industrial warehouse floor degreasing and facility sanitation.
- Agricultural equipment cleaning and livestock facility maintenance.
- Parking garage and exterior concrete surface preparation.
- Base-mounted integration into dedicated truckmounts, skid systems, and stationary wash bays.
Specifications
| Brand |
Clean Storm |
| Model Number |
20211240 |
| Water Type |
Cold Water |
| Power Source |
Electric Motor |
| Operating Pressure |
3000 PSI / 207 Bar |
| Flow Rate |
4 GPM / 15.2 LPM |
| Horsepower |
7.5 HP |
| Voltage / Amperage / Phase |
230 Volt / 34 Amp / 1 Phase |
| Mounting Type |
Base Mount / Foot Mount |
| Pump Type |
Industrial Triplex Plunger Pump |
| Plunger Material |
Ceramic Plungers |
| Valve Material |
Stainless Steel Valves |
| Pump Thermal Protection |
Mechanical Thermal Overload Protected |
| Max Pump Inlet Water Temperature |
160° F / 71° C |
| Hose Dimensions |
50 ft x 3/8 in with NPTF Tapered Thread Connections |
| Power Cord Length |
10 ft |
| Product Dimensions |
28 in x 20 in x 13 in |
| Shipping Weight |
220 lbs |
| Swivel Mechanism |
Non-Live / Installation Only Hose Swivel Fittings |
Cross-Reference SKUs
| Clean Storm 20211240 |
| CS20211240 |
| Cam Spray Base Mount Electric Washer Variant |
| CS-3000-4-230-BM |
| CleanStorm20211240 |
Tips and Additional Information
Pre-Installation Inspection: Inspect the unit thoroughly upon delivery for any shipping damage. Verify that incoming power matches the 230V, 34A, single-phase electrical requirements before permanent wiring.
Thread Sealing Practices: When installing fittings and plumbing connections, use high-quality PTFE thread sealant tape or liquid thread sealant approved for high-pressure water lines. Ensure no tape fragments enter the fluid stream to prevent unloader valve or nozzle clogging.
Installation Alignment: Securely bolt the foot-mount base to a rigid, level flat surface to minimize vibration and structural stress on the motor and pump assembly.
Live vs. Non-Live Operation: Standard hose connections and fittings utilize non-live installation-only configurations. Do not twist high-pressure hoses under pressure; ensure swivels are only adjusted during system depressurization to prevent premature seal failure or high-pressure blowouts.
Frequently Asked Questions
Q: Is this unit equipped with a live rotary swivel or non-live fittings?
A: The system utilizes standard non-live, installation-only mechanical fittings and hose connections. Adjustments or rotations must only be performed while the system is completely shut down and depressurized.
Q: What are the electrical power requirements for this pressure washer?
A: This unit requires a 230 Volt, 34 Amp, single-phase power supply connected to a dedicated industrial circuit with proper thermal breaker protection.
Q: Can hot water be supplied to the pump inlet?
A: The maximum pump inlet water temperature is 160° F (71° C). Exceeding this temperature can damage the pump seals and internal ceramic plungers.
Q: How is chemical detergent applied during operation?
A: Low-pressure chemical injection is automatically activated by switching to the soap tip included with the trigger gun accessory kit.
Warranty & Safety Information
Manufacturer Warranty Coverage: This Clean Storm commercial pressure washer is backed by a limited manufacturer warranty covering defects in materials and workmanship for industrial components, including the electric motor and triplex pump assembly, subject to proper installation, operational limits, and regular maintenance.
Conditions That Void Warranty: Warranty coverage is strictly voided by operating the equipment above maximum pressure (3000 PSI) or temperature (160° F) ratings, utilizing non-live fittings in continuous rotary applications, improper thread engagement, running the pump dry without adequate water supply, unauthorized modifications, or failure to follow recommended electrical wiring and maintenance protocols. Safety hazard warnings apply regarding high-pressure fluid injection and electrical shock risks.
|