

Clean Storm 20211243, Industrial Cold Electric Pressure Washer Steel Frame 50 Gal Tank 2000 PSI 8 GPM 230V 1 Phase
Description
The Cam Spray Clean Storm 20211243 is an industrial stationary cold water electric pressure washer delivering 2000 PSI at 8 GPM with a 50-gallon bypass tank, 10 HP motor, and powder-coated protective steel frame for continuous commercial wash bays. Engineered for high-volume facility cleaning, this base-mounted system utilizes closed-loop tank recirculation to eliminate thermal buildup and prevent hot water discharge onto shop floors during bypass operation. Driven by a totally enclosed 230-volt, 40-amp single-phase industrial motor with thermal overload protection, it powers a heavy-duty triplex plunger pump outfitted with solid ceramic plungers, stainless steel valves, and a pressure-regulating unloader valve. Complete with low-pressure chemical injection, a 50-foot by 3/8-inch high-pressure hose, trigger gun assembly, and four quick-connect Q-Meg nozzles, this stationary unit provides turnkey cleaning performance for demanding industrial environments.
Features
- Closed-Loop 50-Gallon Bypass Tank Recirculation: Routes bypass water back into the integrated 50-gallon holding tank rather than dumping onto the floor, keeping pump temperatures lower and extending seal and valve service life.
- Industrial Triplex Plunger Pump: Features solid ceramic plungers, corrosion-resistant stainless steel valves, and an adjustable unloader valve for sustained high-flow 8 GPM operation at 2000 PSI.
- 10 HP Totally Enclosed Industrial Electric Motor: Operates on 230V, 40A single-phase power with integrated thermal overload protection to safeguard windings against overheating and voltage fluctuations.
- Heavy-Duty Protective Steel Frame: Base-mounted tubular and plate steel enclosure shields the motor, pump, and 50-gallon tank from impacts in busy wash bays and industrial plants.
- Low-Pressure Chemical Injection System: Downstream detergent injector draws concentrated liquid soaps and degreasers automatically when the low-pressure soap nozzle is installed.
- Complete Turnkey Spray Accessory Kit: Includes a 50-foot x 3/8-inch high-pressure discharge hose, ergonomic trigger gun and wand assembly, and 0°, 15°, 25°, and 40° quick-connect Q-Meg nozzles.
- Mechanical Pump Thermal Protection: Built-in thermal relief safeguard protects pump internals against excessive inlet or recirculating water temperatures up to 160°F.
Applications
- Commercial Fleet and Truck Wash Bays: High-volume 8 GPM flow rate rapidly flushes mud, road film, and salt from semi-trucks, delivery vans, municipal vehicles, and trailers.
- Heavy Equipment and Construction Maintenance Yards: Removes caked dirt, grease, and debris from excavators, skid steers, loaders, and agricultural machinery.
- Industrial Manufacturing and Processing Plants: Ideal for stationary washdown stations cleaning production floors, conveyors, food-grade totes, and plant equipment.
- Automotive Dealerships and Service Centers: Provides reliable, indoor-safe electric cold water washing without exhaust fumes or floor puddle hazards from thermal dump valves.
- Marine, Dockside, and Shipyard Facilities: Continuous-duty electric operation supports hull rinsing, salt removal, and dock maintenance where stationary plumbing is required.
Specifications
| Brand |
Cam Spray (Clean Storm Series) |
| Model and Part Number |
20211243 |
| Machine Type |
Stationary Cold Water Electric Pressure Washer with Integrated Tank |
| Mounting Configuration |
Base Mount with Protective Steel Frame |
| Operating Pressure |
2000 PSI (138 Bar) |
| Flow Rate |
8.0 GPM (30.4 LPM) |
| Motor Horsepower |
10 HP Industrial Totally Enclosed Motor |
| Electrical Requirements |
230 Volt, 40 Amp, Single Phase (1-Phase), 60 Hz |
| Power Cord Length |
10 Feet |
| Pump Design |
Industrial Triplex Plunger Pump with Ceramic Plungers and Stainless Steel Valves |
| Pump Protection |
Pressure-Regulating Unloader Valve and Mechanical Thermal Protection |
| Water Tank Capacity |
50 US Gallons (Recirculating Bypass Tank) |
| Maximum Inlet Water Temperature |
160°F (71°C) |
| Chemical Injection |
Low-Pressure Downstream Injector (Activated via Soap Tip) |
| High-Pressure Hose Dimensions |
50 Feet Length x 3/8 Inch Inner Diameter |
| Discharge and Hose Connections |
3/8 Inch NPTF Tapered Pipe Thread and Quick-Connect Couplers |
| Swivel Mechanics |
Non-Live Stationary Fittings (Installation Alignment Only; Use Optional Live Swivel at Gun) |
| Included Nozzles |
0°, 15°, 25°, and 40° Quick-Connect Q-Meg Spray Tips plus Chemical Soap Tip |
| Overall Dimensions (L x W x H) |
40 Inches x 24 Inches x 47 Inches |
| Shipping Weight |
445 lbs |
Cross-Reference SKUs
| 20211243 |
| CS-20211243 |
| CS20211243 |
| CAM-20211243 |
| CAM20211243 |
| CLEANSTORM-20211243 |
| CLEANSTORM20211243 |
| 2021-1243 |
| 2021 1243 |
| CS-2080E-50T |
Tips and Additional Information
Before energizing the 230V 40A single-phase circuit, inspect all plumbing joints, pump oil sight glass levels, and tank float valve assemblies to verify no fittings loosened during freight transit. Apply high-density PTFE thread seal tape (3 to 4 wraps clockwise) or rated anaerobic thread sealant to all tapered 3/8-inch NPTF male threads when connecting the discharge hose, chemical injector, and quick-connect couplers, while keeping straight NPSM mechanical swivel nuts free of tape so the O-ring or metal-to-metal seat seals properly. Ensure the stationary steel frame is anchored on a level, well-drained surface with at least 18 inches of airflow clearance around the totally enclosed motor fan shroud. Always distinguish between non-live installation fittings on the manifold and live rotary swivels at the spray gun; tighten stationary pump connections in proper alignment prior to pressurization and never attempt to rotate fixed fittings under 2000 PSI load. Flush the 50-gallon holding tank periodically to remove sediment and verify the float shutoff maintains an uninterrupted water supply to prevent pump cavitation.
Frequently Asked Questions
Q: Why does this stationary pressure washer include a 50-gallon tank?
A: The 50-gallon tank acts as both a buffer reservoir for consistent 8 GPM water supply and a closed-loop bypass tank. When the trigger gun is released, bypassed water recirculates back into the large tank rather than dumping onto the floor, preventing heat buildup and keeping the pump cool.
Q: What electrical service is required to run the Clean Storm 20211243?
A: This unit requires a dedicated 230-volt, single-phase electrical circuit rated for at least 40 amps continuous draw (typically wired to a 50-amp breaker in accordance with local electrical codes) to support the 10 HP industrial motor.
Q: How is the low-pressure chemical injection system activated?
A: The downstream chemical injector operates via a Venturi pressure drop. Simply snap the low-pressure black soap nozzle onto the end of the wand to drop line pressure and automatically siphon liquid detergent from your chemical container.
Q: Are the hose and manifold fittings live swivels?
A: The standard manifold and pump discharge fittings are non-live stationary connections intended for leak-free alignment during installation only. If continuous 360-degree hose rotation is desired while spraying, install a high-pressure live rotary swivel between the 3/8-inch hose and the trigger gun inlet.
Q: Can hot water be fed into the 50-gallon supply tank?
A: Yes, provided the supply water temperature does not exceed the pump's maximum inlet rating of 160°F (71°C). Exceeding 160°F will damage the ceramic plunger seals and void pump warranty coverage.
Warranty & Safety Information
The Clean Storm 20211243 is backed by the manufacturer's limited commercial equipment warranty covering defects in materials and workmanship on the industrial triplex pump, 10 HP electric motor, steel frame, and 50-gallon tank assembly under normal commercial use. Warranty coverage is strictly voided by operating the system above 2000 PSI, exceeding the 160°F maximum inlet water temperature, running the pump dry or with a starved water supply, altering factory unloader or thermal relief settings, using non-live fittings in continuous rotary motion, or improper electrical wiring and voltage supply. For operator safety, never point the high-pressure spray stream at people, animals, or electrical panels; always relieve residual line pressure by squeezing the trigger gun after shutting off power before disconnecting hoses or changing Q-Meg nozzles, and ensure a licensed electrician completes the 230V 40A single-phase installation with proper GFCI protection.
|

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Clean Storm 20211243, Industrial Cold Electric Pressure Washer Steel Frame 50 Gal Tank 2000 PSI 8 GPM 230V 1 Phase [20211243]
Click here for our full shipping policy. Specifications are subject to change without notice. Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products. Prop 65 Notice.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.
|