

Clean Storm 20220110, Deluxe Wall Mount Cold Water Pressure Washer 1000 PSI 2.2 GPM 120V
Description
The Clean Storm 20220110 Deluxe Wall Mount Cold Water Electric Pressure Washer delivers 1000 PSI at 2.2 GPM on a standard 120V 15A circuit for continuous commercial washdowns. Proven over 25 years in demanding industrial facilities, this stationary unit features an industrial painted steel or full stainless steel frame with a protective cover, a totally enclosed thermal overload protected 1.5 HP motor, and an industrial triplex plunger pump equipped with ceramic plungers and stainless steel valves. The system slides onto a heavy-duty permanent wall mounting bracket and includes dual low-pressure chemical injection with an adjustable proportioning knob, integrated hose and gun storage hooks, cover grommets for Q-Meg nozzles, a 50-foot 3/8-inch high-pressure hose, trigger gun, and a 35-foot GFCI-protected power cord.
Features
- Industrial triplex plunger pump engineered with wear-resistant ceramic plungers, stainless steel valves, mechanical thermal protection, and a pressure-regulating unloader valve.
- Totally enclosed 1.5 HP industrial electric motor with built-in thermal overload protection operating on single-phase 120 Volt, 15 Amp power.
- Heavy-duty wall-mount architecture featuring a permanent wall plate and slide-in machine frame available in industrial powder-coated steel or corrosion-resistant full stainless steel.
- Protective outer enclosure with built-in storage grommets for 0°, 15°, 25°, and 40° Q-Meg nozzles alongside dual frame hooks for neat trigger gun and hose organization.
- Dual low-pressure chemical injection system controlled by a single selector and proportioning knob, allowing operators to switch between two liquid concentrates using the soap nozzle.
- Complete turnkey washdown assembly including a 50-foot x 3/8-inch high-pressure hose, ergonomic trigger gun assembly, and a 35-foot power cord with integrated GFCI safety plug.
Applications
- Commercial automotive detailing bays, fleet maintenance garages, and dealership wash stations.
- Food and beverage processing facilities, commercial kitchens, and sanitary washdown rooms requiring stationary cold-water cleaning.
- Manufacturing plants, industrial workshops, and equipment maintenance bays utilizing standard 120V 15A electrical outlets.
- Agricultural barns, kennels, veterinary clinics, and municipal facilities needing organized, off-the-floor pressure washing systems.
Specifications
| Brand |
Clean Storm |
| Part Number |
20220110 |
| Model Series |
1000WM Deluxe Wall Mount |
| Water Temperature Type |
Cold Water |
| Operating Pressure |
1000 PSI (69 Bar) |
| Flow Rate |
2.2 GPM (8.4 LPM) |
| Motor Horsepower |
1.5 HP (Totally Enclosed, Thermal Overload Protected) |
| Electrical Requirements |
120 Volts, 15 Amps, Single Phase |
| Power Cord |
35 ft with Integrated GFCI Plug |
| Pump Design |
Industrial Triplex Plunger Pump with Ceramic Plungers & Stainless Steel Valves |
| Pump Thermal Protection |
Mechanical Thermal Relief Valve |
| Max Inlet Water Temperature |
160°F |
| Chemical Injection |
Dual Low-Pressure Downstream Chemical Valve with Proportioning Knob |
| Discharge Hose |
50 ft x 3/8 in High-Pressure Hose |
| Included Nozzles |
0°, 15°, 25°, and 40° Q-Meg Quick-Connect Nozzles |
| Frame & Enclosure Material |
Industrial Painted Steel or Full Stainless Steel with Protective Cover |
| Mounting Configuration |
Permanent Wall Bracket with Slide-In Frame |
| Dimensions (L x W x H) |
23 in x 16 in x 31 in |
| Shipping Weight |
165 lbs |
Cross-Reference SKUs
| 20220110 |
| CS-20220110 |
| CS20220110 |
| 1000WM |
| CS-1000WM |
| CS1000WM |
| Clean Storm 20220110 |
| Clean Storm 1000WM |
Tips and Additional Information
Prior to installation, verify that the mounting wall structure is adequately reinforced with structural studs, masonry anchors, or steel backing capable of safely supporting the 165 lb machine weight plus dynamic hose pull forces. Apply PTFE thread seal tape or industrial pipe sealant to all non-swivel NPT water inlet and high-pressure outlet fittings, ensuring proper thread alignment to prevent cross-threading or air leaks on the suction side. While the trigger gun assembly utilizes a rigid or swivel connection depending on hose configuration, always inspect O-rings inside quick-connect couplers and Q-Meg nozzle seats before startup to maintain a leak-free 1000 PSI seal. Flush the incoming water supply line prior to connecting it to the pump inlet to prevent debris from scoring the ceramic plungers or fouling the stainless steel check valves.
Frequently Asked Questions
Q: What electrical circuit is required to run the Clean Storm 20220110 pressure washer?
This unit is powered by a 1.5 HP single-phase motor engineered to operate on a standard 120 Volt, 15 Amp circuit and includes a 35-foot power cord equipped with a built-in GFCI plug. For optimal motor performance and to prevent nuisance tripping, plug the unit directly into a dedicated 15A or 20A receptacle without using lightweight extension cords.
Q: How does the dual chemical injection system operate on the 1000WM model?
The unit features a low-pressure downstream chemical valve with a selector and metering knob that lets you draw from two separate liquid detergent containers and adjust the chemical dilution ratio. Chemical draw activates automatically when you install the low-pressure soap nozzle onto the trigger gun wand, dropping system pressure to allow detergent siphon.
Q: Can hot water be fed into the Clean Storm 20220110 pump inlet?
Although classified as a cold water pressure washer, the industrial triplex plunger pump is rated for a maximum inlet water temperature of 160°F, allowing connection to tempered or warm facility supply lines without damaging pump seals.
Q: How is the machine mounted and serviced once installed on the wall?
A heavy-duty mounting plate is bolted permanently to a reinforced wall, and the pressure washer frame slides directly onto the bracket. This slide-in design secures the unit during operation while allowing technicians to lift the frame off the wall plate if major maintenance is ever required.
Warranty & Safety Information
This commercial pressure washer is backed by manufacturer coverage against defects in materials and workmanship on the frame, electric motor, and triplex plunger pump under normal commercial operation. Warranty coverage will be voided if the unit is operated dry without an adequate water supply, subjected to freezing temperatures without proper winterization, connected to improper voltage, fed water exceeding the 160°F maximum inlet rating, or damaged by caustic chemicals passing directly through the pump head instead of the downstream chemical injector. Always test the 35-foot GFCI plug before each use, wear ANSI-approved eye protection and waterproof footwear, never point the 1000 PSI spray stream at personnel or electrical panels, and engage the trigger gun safety lock whenever changing Q-Meg nozzles or leaving the workstation unattended.
|