

Clean Storm 20220112, Wall Mount Cold Water Electric Pressure Washer 1000 PSI 2.2 GPM 120V Stainless Steel
Description
The Clean Storm 20220112 Wall Mount Cold Water Electric Pressure Washer delivers 1000 PSI at 2.2 GPM on standard 120V 15A power inside a heavy-duty corrosion-resistant stainless steel frame and cover. Engineered for continuous commercial wash-down duty, this space-saving unit mounts securely to a reinforced wall via a slide-on mounting bracket plate. Driven by a 1.5 HP totally enclosed industrial motor with thermal overload protection, it powers an industrial triplex plunger pump equipped with ceramic plungers, stainless steel valves, mechanical thermal protection, and an unloader valve. Integrated low-pressure chemical injection features a dual chemical selector and proportioning valve activated via the included soap nozzle, alongside onboard storage hooks for the 50-foot high-pressure hose and trigger gun, plus cover grommets for the included 0, 15, 25, and 40-degree Q-Meg nozzles.
Features
- Full stainless steel frame and protective outer cover resist rust, moisture, and chemical corrosion in harsh wash environments.
- Slide-in wall mounting bracket design saves floor space while allowing rapid installation and service access on adequately reinforced walls.
- 1.5 HP totally enclosed industrial electric motor features built-in thermal overload protection and runs on a standard 120 Volt, 15 Amp, single-phase circuit.
- Industrial triplex plunger pump built with wear-resistant ceramic plungers, stainless steel check valves, unloader valve, and mechanical pump thermal protection.
- Dual low-pressure chemical injection valve allows operators to switch between two liquid detergent concentrates and adjust dilution ratios with a single knob.
- Integrated frame hooks organize the 50 ft x 3/8 in high-pressure hose and trigger gun, while cover grommets store quick-connect Q-Meg spray tips.
- Includes 35-foot power cord with integrated GFCI plug, trigger gun wand assembly, and 0°, 15°, 25°, and 40° Q-Meg nozzles.
Applications
- Commercial food processing plants, commercial kitchens, butcher shops, and dairy wash-down bays
- Automotive detailing bays, fleet maintenance shops, and dealership service departments
- Manufacturing facilities, warehousing loading docks, and industrial equipment sanitation stations
- Kennels, veterinary clinics, agricultural barns, and municipal maintenance facilities
Specifications
| Brand |
Clean Storm |
| Part Number |
20220112 |
| Mounting Type |
Wall Mount (Slide-On Mounting Bracket) |
| Frame and Cover Material |
Full Stainless Steel |
| Water Temperature Type |
Cold Water |
| Max Pump Inlet Water Temp |
160° F |
| Operating Pressure |
1000 PSI (69 Bar) |
| Flow Rate |
2.2 GPM (8.4 LPM) |
| Motor Horsepower |
1.5 HP |
| Motor Enclosure and Protection |
Totally Enclosed with Thermal Overload Protection |
| Electrical Requirements |
120 Volt, 15 Amp, 1 Phase |
| Power Cord |
35 ft with Integrated GFCI |
| Pump Type |
Industrial Triplex Plunger Pump (Ceramic Plungers, Stainless Steel Valves) |
| Pump Protection |
Unloader Valve and Mechanical Thermal Protection |
| Chemical Injection |
Dual Low-Pressure Concentrate Valve with Proportioning Knob |
| Hose Dimensions |
50 ft x 3/8 in High-Pressure Hose |
| Included Nozzles |
0°, 15°, 25°, 40° Q-Meg Tips and Soap Tip |
| Product Dimensions |
23 in x 16 in x 31 in |
| Shipping Weight |
165 lbs |
Cross-Reference SKUs
| 20220112 |
| Clean Storm 20220112 |
| Northern Tool 103371 |
| 103371 |
Tips and Additional Information
Prior to mounting, verify that the wall structure and fasteners are rated to support the 165 lb unit weight plus dynamic hose pull forces. Always inspect the inlet water screen, quick-connect O-rings, and 3/8-inch hose fittings before startup, applying PTFE thread tape or liquid thread sealant to male NPT plumbing connections where required. Purge all air from the water supply line by squeezing the trigger gun with the water turned on before energizing the 120V motor. To activate the dual low-pressure chemical injector, install the dedicated soap nozzle; high-pressure Q-Meg tips (0°, 15°, 25°, 40°) restrict chemical draw. Ensure the 35-foot GFCI cord is plugged directly into a dedicated 15A receptacle rather than an unrated extension cord to prevent voltage drop and nuisance tripping.
Frequently Asked Questions
Q: Does this wall-mounted pressure washer require a 240V outlet or hardwiring?
No. The Clean Storm 20220112 operates on a standard 120 Volt, 15 Amp, single-phase circuit and includes a 35-foot power cord equipped with a built-in GFCI plug.
Q: How does the dual chemical valve work on the Clean Storm 20220112?
The unit is plumbed with a dual low-pressure chemical injector manifold that lets you draw from two separate liquid detergent containers. Turning the selector knob chooses the active chemical line and adjusts the soap concentration ratio when the low-pressure soap nozzle is installed on the wand.
Q: Can hot water be fed into this cold-water pressure washer?
While designed as a cold-water electric pressure washer, the industrial triplex plunger pump is rated for a maximum inlet water temperature of 160° F. Exceeding 160° F will damage the pump seals and ceramic plungers.
Q: What is included in the box with part number 20220112?
The unit ships complete with the stainless steel wall-mount pressure washer, slide-on wall mounting plate, 50 ft x 3/8 in high-pressure hose, trigger gun assembly, 35 ft GFCI power cord, soap nozzle, and 0°, 15°, 25°, and 40° Q-Meg nozzles.
Warranty & Safety Information
Backed by the manufacturer's standard commercial warranty against defects in materials and workmanship; normal wear items including seals, O-rings, nozzles, and hoses are excluded. Warranty coverage is voided by running the pump dry, exceeding the 160° F maximum inlet water temperature, operating on an undersized circuit or improper extension cord, freezing temperatures without winterization, or pumping caustic acids and flammable solvents. Never exceed the rated 1000 PSI operating pressure, never bypass the 160° F thermal
|

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Clean Storm 20220112, Wall Mount Cold Water Electric Pressure Washer 1000 PSI 2.2 GPM 120V Stainless Steel [20220112]
Click here for our full shipping policy. Specifications are subject to change without notice. Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products. Prop 65 Notice.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.
|