

Clean Storm 20220131, Wall Mounted Cold Electric Pressure Washer 3000 psi 4 Gpm 240 Volts 1 Phase 34 Amps, Stainless Steel
Description
The Clean Storm 20220131 Wall Mount Cold Water Electric Pressure Washer delivers 3000 PSI at 4 GPM using a 7.5 HP 230V 1-phase motor housed in a heavy-duty stainless steel frame. Engineered for demanding commercial wash bays, automotive detailing centers, and industrial sanitation facilities, this stationary unit keeps floors clear while providing continuous high-pressure cleaning power. Featuring an industrial triplex plunger pump with ceramic plungers, stainless steel valves, and an integrated unloader valve, the system is built for maximum longevity and daily duty cycles. A protective stainless steel cover shields internal components from overspray and harsh environments, while built-in hooks, nozzle grommets, and a dual chemical metering valve streamline operator workflow.
Features
- Full stainless steel frame and protective cover resist rust, corrosion, and chemical exposure in wet wash-bay environments.
- Slide-on wall mounting plate design simplifies installation and allows secure attachment to reinforced structural walls.
- Industrial 7.5 HP totally enclosed electric motor includes built-in thermal overload protection for continuous commercial operation.
- Heavy-duty triplex plunger pump features solid ceramic plungers, stainless steel valves, and mechanical thermal relief protection.
- Dual chemical injector valve lets operators switch between two liquid concentrate detergents and adjust dilution ratios with a single control knob.
- Integrated frame hooks keep the 50-foot high-pressure hose and trigger gun organized off the floor, while cover grommets hold Q-Meg nozzles.
- Complete turnkey package includes a 50-foot 3/8-inch high-pressure hose, trigger gun assembly, and 0°, 15°, 25°, and 40° Q-Meg spray tips.
Applications
- Automotive detailing bays, fleet maintenance garages, and commercial truck wash stations.
- Food and beverage processing facilities requiring non-corrosive stainless steel sanitation equipment.
- Industrial manufacturing plants, equipment rental yards, and agricultural washdown areas.
- Commercial marinas, car dealerships, and municipal service bays with dedicated 230V-240V single-phase electrical service.
Specifications
| Brand |
Clean Storm |
| Part Number |
20220131 |
| Water Type |
Cold Water |
| Mounting Type |
Wall Mount (Slide-On Mounting Plate) |
| Frame Material |
Stainless Steel with Protective Cover |
| Operating Pressure |
3000 PSI (207 Bar) |
| Flow Rate |
4.0 GPM (15.2 LPM) |
| Motor Horsepower |
7.5 HP |
| Electrical Requirements |
230V - 240V, 1 Phase, 34 Amps |
| Power Cord Length |
10 Feet |
| Pump Type |
Industrial Triplex Plunger Pump (Ceramic Plungers, Stainless Steel Valves) |
| Pump Thermal Protection |
Mechanical Thermal Relief Valve |
| Maximum Inlet Water Temperature |
160°F |
| Chemical Injection |
Low-Pressure Dual Chemical Valve (Soap Tip Activated) |
| Included Hose |
50 Feet x 3/8 Inch High-Pressure Hose |
| Included Nozzles |
0°, 15°, 25°, 40° Q-Meg Tips |
| Product Dimensions |
28" L x 22" W x 30" H |
| Shipping Weight |
280 lbs |
Cross-Reference SKUs
| 20220131 |
| Clean Storm 20220131 |
| Northern Tool 109131 |
| 109131 |
Tips and Additional Information
Before mounting, verify that the wall structure can safely support the 280 lb static weight plus operational vibration; secure the permanent wall bracket into masonry, steel framing, or reinforced wood studs using heavy-duty lag bolts or anchors. Apply PTFE thread seal tape or pipe dope to all NPT inlet water fittings, and verify that quick-connect couplers on the 3/8-inch discharge hose and trigger gun lock firmly into place before pressurizing the system. Ensure your incoming water supply delivers at least 4.5 GPM to prevent pump cavitation, and confirm a dedicated 230V-240V single-phase circuit breaker rated appropriately for a 34-amp continuous motor load is installed by a licensed electrician. To activate the low-pressure dual chemical injector, install the black low-pressure soap nozzle onto the wand and turn the selector knob to the desired chemical line.
Frequently Asked Questions
Q: Does this unit require a standard 115V outlet or dedicated high-voltage wiring?
This pressure washer requires a dedicated 230V to 240V single-phase electrical supply drawing 34 amps. It comes equipped with a 10-foot power cord and must be connected to an appropriately sized breaker by a qualified electrician.
Q: How does the dual chemical valve operate on the Clean Storm 20220131?
The unit features a low-pressure downstream chemical injection system with a dual-port metering valve. By turning the selector knob, you can draw from either of two separate detergent containers and fine-tune the chemical dilution ratio when using the low-pressure soap nozzle.
Q: Can I feed warm water into this cold-water pressure washer?
Yes, while the machine does not contain an internal burner to heat water, the industrial triplex pump is rated for incoming water temperatures up to 160°F and includes mechanical thermal protection.
Q: How is the machine mounted to the wall?
First, fasten the heavy-duty mounting bracket permanently to an adequately reinforced wall. Once the bracket is level and anchored, the stainless steel machine frame slides directly onto the mounting plate for secure support.
Warranty & Safety Information
Covered under Clean Storm manufacturer limited warranty against defects in materials and workmanship on the stainless steel frame, electric motor, and triplex pump assembly. Warranty coverage is voided by pump cavitation from insufficient water supply, running the pump dry, exceeding the 160°F maximum inlet water temperature, freezing damage, improper electrical voltage wiring, or unauthorized modifications to the unloader valve. Safety Hazard: High-pressure water streams exceeding 3000 PSI can cause severe fluid injection injuries; always wear eye protection, keep hands clear of the nozzle tip, engage the trigger safety lock when not spraying, and disconnect main electrical power prior to servicing.
|