

Clean Storm 20220132, Wall Mount Cold Electric Pressure Washer, 3000 PSI 4 GPM 7.5 HP 208V 1 Phase 34A, Stainless Steel
Description
Delivering 3000 PSI at 4.0 GPM, the Clean Storm 20220132 is a heavy-duty stainless steel wall-mounted cold water electric pressure washer engineered for continuous commercial and industrial washdown operations. Built around a 7.5 HP single-phase electric motor and an industrial triplex plunger pump with solid ceramic plungers and stainless steel valves, this stationary cleaning system eliminates floor clutter while maximizing bay efficiency. The corrosion-resistant stainless steel frame and protective cover shield internal components from harsh chemicals and constant overspray, mounting securely to any reinforced wall via a heavy-duty slide-in wall bracket. Equipped with a dual-chemical proportioning valve, integrated hose and gun hooks, cover-mounted nozzle grommets, a 50-foot high-pressure hose, and four Q-Meg quick-connect nozzles, it provides a complete turnkey solution for fleet maintenance, agricultural facilities, and industrial wash bays.
Features
- Full corrosion-resistant stainless steel frame and protective outer cover built to withstand wet, caustic, and high-humidity environments.
- Heavy-duty wall-mounting plate system allows permanent anchoring to a reinforced wall with effortless slide-in machine installation and removal.
- 7.5 HP totally enclosed fan-cooled (TEFC) industrial electric motor featuring built-in thermal overload protection for continuous-duty reliability.
- Industrial triplex plunger pump constructed with durable solid ceramic plungers, stainless steel valves, mechanical thermal relief protection, and a pressure-regulating unloader valve.
- Dual chemical injector valve lets operators switch seamlessly between two separate liquid detergent concentrates and meter dilution ratios with a single control knob.
- Integrated onboard storage includes two welded frame hooks for the 50-foot hose and trigger gun assembly plus built-in cover grommets for Q-Meg spray tips.
- Complete accessory package includes a heavy-duty trigger gun, 50' x 3/8" high-pressure discharge hose, 10' power cord, and 0°, 15°, 25°, and 40° Q-Meg nozzles.
Applications
- Commercial automotive detailing shops, car washes, and dealership service bays.
- Trucking fleet maintenance facilities, municipal garages, and heavy equipment washdown stations.
- Food and beverage processing plants, commercial kitchens, and USDA-inspected sanitation zones requiring stainless steel construction.
- Agricultural barns, dairy parlors, livestock trailers, and farming equipment cleaning bays.
- Industrial manufacturing floors, warehouse loading docks, and marine dockside washdowns.
Specifications
| Brand |
Clean Storm |
| Model Number |
20220132 |
| Water Type |
Cold Water |
| Mounting Configuration |
Wall Mount (Slide-In Bracket Included) |
| Frame & Cover Material |
Stainless Steel |
| Operating Pressure |
3000 PSI (207 Bar) |
| Flow Rate |
4.0 GPM (15.2 LPM) |
| Motor Horsepower |
7.5 HP Totally Enclosed Industrial Motor |
| Electrical Requirements |
208V-240V, 1-Phase, 34 Amps |
| Power Cord Length |
10 Feet |
| Pump Type |
Industrial Triplex Plunger Pump (Ceramic Plungers, Stainless Steel Valves) |
| Pump Protection |
Unloader Valve & Mechanical Thermal Relief Valve |
| Maximum Inlet Water Temperature |
160°F |
| Chemical Injection |
Low-Pressure Dual Chemical Proportioning Valve (Soap Nozzle Activated) |
| High-Pressure Hose |
50 Feet x 3/8 Inch |
| Included Nozzles |
0°, 15°, 25°, and 40° Q-Meg Quick-Connect Spray Tips |
| Product Dimensions (L x W x H) |
28" x 22" x 30" |
| Shipping Weight |
280 lbs |
Cross-Reference SKUs
| 20220132 |
| Clean Storm 20220132 |
| CS-20220132 |
| CS20220132 |
| Northern Tool 104220 |
| 104220 |
Tips and Additional Information
Structural Mounting & Alignment: Because the unit has a shipping weight of 280 lbs and generates dynamic operating vibration, anchor the permanent wall mounting plate directly into structural steel framing, solid concrete, or masonry using heavy-duty lag bolts or concrete anchors rated well above the static load. Ensure the mounting plate is completely level before sliding the stainless steel chassis onto the bracket.
Pre-Install Inspection & Thread Sealing: Before startup, check the triplex pump crankcase oil level and replace the solid shipping plug with the vented oil dipstick cap. Apply PTFE thread seal tape or high-pressure liquid thread sealant to all rigid NPT inlet and discharge fittings while leaving quick-disconnect O-ring seals bare. Flush your water supply line before connecting to prevent sediment from damaging the stainless steel check valves or ceramic plungers.
Electrical & Hose Reel Setup: This unit draws 34 amps on a single-phase 208V–240V circuit; have a licensed electrician verify wire gauge and breaker sizing to prevent voltage drop under full 3000 PSI load. If pairing this wall-mount system with an auxiliary wall-mounted hose reel, use a rated high-pressure live swivel jumper hose between the pump outlet and reel manifold to prevent hose twisting.
Frequently Asked Questions
Q: How does the dual chemical injection system operate on the Clean Storm 20220132?
A: The machine utilizes a downstream low-pressure chemical injector paired with a dual-port selector and metering knob. Place each chemical pickup tube into a separate detergent concentrate container, turn the dial to select Chemical A or Chemical B and set your desired dilution ratio, and install the low-pressure soap nozzle onto your wand to drop line pressure and draw detergent automatically.
Q: Can this pressure washer be connected to a hot water supply line?
A: While this is a cold water electric pressure washer without an onboard burner, the industrial triplex pump is rated for a maximum inlet water temperature of 160°F. You may feed it tempered or pre-heated facility water up to 160°F without damaging the pump seals or ceramic plungers.
Q: What electrical supply is required to run this 7.5 HP wall-mount pressure washer?
A: The motor requires a dedicated single-phase 208V to 240V electrical circuit capable of supporting a 34-amp continuous load. It includes a 10-foot heavy-duty power cord for connection to an appropriately rated industrial receptacle or disconnect box.
Q: Does the wall bracket support the entire weight of the machine without floor legs?
A: Yes, the heavy-duty wall mounting plate is engineered to support the full weight of the stainless steel frame and motor-pump assembly when properly anchored into a load-bearing concrete, masonry, or reinforced structural steel wall.
Warranty & Safety Information
Warranty Coverage & Void Conditions: Covered by Clean Storm's manufacturer limited warranty against defects in materials and workmanship under normal commercial use. Warranty coverage is voided by running the pump dry, exceeding the 160°F maximum inlet water temperature, operating without an inlet water filter, failing to maintain proper pump crankcase oil levels, freezing damage, or wiring the motor to an improper voltage or under-amped circuit.
Safety & Operating Hazards: High-pressure fluid streams at 3000 PSI can cause severe injection injuries; never point the spray wand at people, pets, or electrical equipment. Always engage the trigger gun safety lock when changing Q-Meg nozzles or stepping away from the wand. Do not allow the machine to run in bypass mode with the trigger released for extended periods, and ensure the unit is properly grounded and protected by a GFCI circuit before operation.
|