

Clean Storm 20220136, Auto Start Stop Wall Mount Electric Cold Pressure Washer 2.2 GPM 1500 PSI 120V 20A 2HP
Description
The Clean Storm 20220136 Wall Mount Electric Pressure Washer delivers 2.2 GPM at 1500 PSI for reliable cold water commercial and industrial cleaning. Engineered as a space-saving economy unit, this open-frame system eliminates the added expense of an enclosed shroud while keeping critical washing equipment elevated, secure, and off the shop floor. Powered by a 2 HP, 120-volt single-phase motor with automatic start and stop functionality, it minimizes motor wear and energy consumption between trigger pulls. The unit comes ready to work with a 50-foot by 3/8-inch high-pressure hose, trigger gun, wand, and quick-connect Q-meg spray nozzles, making it an ideal stationary washdown solution for auto detailing bays, maintenance shops, and commercial facilities.
Features
- Open-frame wall-mount steel chassis finished with a durable industrial protective coating to resist corrosion in wet environments.
- Integrated storage architecture featuring a dedicated bottom hook for hanging the gun, wand, and 50-foot hose, plus built-in rubber grommets to securely organize spray nozzles.
- Totally enclosed, thermal overload-protected 2 HP electric motor designed for continuous commercial duty and safe indoor operation.
- Auto start and stop system automatically powers down the motor when the trigger gun is released, extending pump life and reducing electrical draw.
- Industrial triplex plunger pump constructed with wear-resistant ceramic plungers, stainless steel valves, and an integrated unloader valve for consistent pressure regulation.
- Mechanical pump thermal protection safeguards internal seals against overheating during extended bypass cycles.
- Low-pressure downstream chemical injection system allows effortless application of concentrated liquid detergents simply by switching to the dedicated soap nozzle.
- Complete accessory package includes a heavy-duty trigger gun, wand, 35-foot power cord with integrated GFCI plug, and 0°, 15°, 25°, and 40° Q-meg quick-connect nozzles.
Applications
- Automotive detailing bays, car dealerships, and fleet maintenance garages requiring stationary cold water washdown.
- Commercial kitchens, food processing prep areas, and indoor facility sanitation where exhaust fumes from gas engines are prohibited.
- Equipment rental yards, agricultural barns, and light manufacturing workshops needing organized, off-floor pressure washing access.
- Marine docks, boat maintenance sheds, and municipal utility rooms with standard 120V 20-amp electrical service.
Specifications
| Brand |
Clean Storm |
| Part Number |
20220136 |
| Model Style |
Economy Wall Mount (Open Frame, No Cover) |
| Water Temperature Type |
Cold Water |
| Operating Pressure |
1500 PSI (103.5 Bar) |
| Flow Rate |
2.2 GPM (8.4 LPM) |
| Motor Horsepower |
2 HP |
| Electrical Requirements |
120 Volt, 20 Amp, 1 Phase |
| Motor Protection |
Totally Enclosed, Thermal Overload Protected |
| Pump Type |
Industrial Triplex Plunger Pump (Ceramic Plungers, Stainless Steel Valves) |
| Pump Protection |
Unloader Valve and Mechanical Thermal Relief |
| Control System |
Auto Start and Stop |
| Chemical Injection |
Low-Pressure Downstream Detergent Injector |
| Max Inlet Water Temperature |
160° F |
| High-Pressure Hose |
50 ft. x 3/8 in. |
| Included Nozzles |
0°, 15°, 25°, 40° Q-Meg Quick-Connect Tips plus Soap Tip |
| Power Cord |
35 ft. with Integrated GFCI |
| Frame Finish |
Industrial Protective Coating |
| Overall Dimensions |
23 in. x 16 in. x 31 in. |
| Shipping Weight |
165 lbs. |
Cross-Reference SKUs
| 20220136 |
| CS-20220136 |
| CS20220136 |
| CLEANSTORM-20220136 |
| 2022-0136 |
Tips and Additional Information
Before mounting the Clean Storm 20220136, verify that the wall structure and anchor hardware can safely support the 165-pound unit weight plus dynamic operational vibration. Always inspect all threaded connections, O-rings, and quick-connect couplers prior to initial startup. Apply PTFE thread seal tape or liquid thread sealant to non-O-ring male pipe threads (NPT) to prevent pressure leaks, while avoiding sealant on swivel or O-ring boss fittings where the seal is mechanical. Ensure the 3/8-inch high-pressure hose uses a live swivel connection at the trigger gun to prevent hose kinking and operator wrist fatigue during washdowns. Purge all air from the water supply line by squeezing the trigger gun before turning on electrical power, and confirm the dedicated 120V circuit is rated for 20 amps without using unapproved extension cords that could cause voltage drop and trip the motor thermal overload.
Frequently Asked Questions
Q: Does this pressure washer require a dedicated 20-amp electrical outlet?
Yes. The 2 HP motor draws 20 amps at 120 volts single-phase and must be plugged directly into a properly grounded, dedicated 20-amp receptacle using the included 35-foot GFCI power cord.
Q: How does the auto start and stop feature operate?
When the trigger gun is squeezed, the pressure drop signals the control switch to start the 2 HP motor automatically. Releasing the trigger builds system pressure against the unloader valve and shuts the motor off, reducing noise, electricity use, and pump wear.
Q: Can I run hot water through the Clean Storm 20220136?
This unit is a cold-water pressure washer without an integrated burner, though the industrial triplex pump is rated to accept pre-heated inlet water up to a maximum temperature of 160° F.
Q: How is detergent applied with this system?
The unit features a low-pressure chemical injector. Installing the included low-pressure soap tip onto the wand drops line pressure and automatically draws concentrated liquid detergent into the water stream.
Warranty & Safety Information
This commercial pressure washer is backed by the manufacturer's standard limited warranty covering defects in materials and workmanship on the frame, motor, and triplex pump. Warranty coverage is voided by running the pump dry, exceeding the 160° F maximum inlet water temperature, operating on an under-amperage electrical circuit, freeze damage, or unauthorized modification of the unloader valve above the 1500 PSI rating. For safe operation, never point the high-pressure spray wand at people, animals, or electrical panels, as fluid injection injuries can occur. Always test the integrated GFCI plug before each use, wear appropriate eye and hearing protection, and relieve residual system pressure by squeezing the trigger gun after shutting off the unit before disconnecting hoses or nozzles.
|

Steambrite processes shipments daily by Fedex, UPS, and USPS (for small packages), as well as a using a variety of freight carriers for oversized/palletized shipments. While the Steambrite website DOES reflect what is available for purchase, it does NOT reflect available inventory at our local warehouse (San Antonio, TX). Special order, or custom build items may take up to 30 days to arrive, but orders shipped from within Steambrite's warehouse inventory are generally processed and shipped in 2-5 business days. Equipment small enough to be sent by ground should typically arrive within 3-5 business days after shipment. Oversized shipments could take in excess of 6-8 working days to arrive after shipment, and ground shipping times are not guaranteed. Clean Storm 20220136, Auto Start Stop Wall Mount Electric Cold Pressure Washer 2.2 GPM 1500 PSI 120V 20A 2HP [20220136]
Click here for our full shipping policy. Specifications are subject to change without notice. Steam Brite Inc shall have no obligation or liability to buyer whether arising in contract (including warranty) tart (including active, passive or imputed negligence) other otherwise for loss of use, revenue or profit, or any other incidental or consequential damages with respect to any non-conformance or defect in any items provided here under. Display images are for reference only, note that all purchases are fulfilled by the part number ordered. You our customer agrees to indemnify Steam Brite Inc and to hold it harmless from and against any and all claims, cost, liabilities, damages and expenses, including attorney's fees, resulting from personal injury or property damaged caused by the Products. Prop 65 Notice.
Warranty Disclaimer: Buyer's sole and exclusive remedy for defects in the products shall be as provided in the manufactures's warranty and any other rights provided by law against the manufacturer. Steam Brite, Inc makes no other than as specified in this agreement. All other warranties, express or implied, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed.
|